lkml.org 
[lkml]   [2005]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectudev problem ...
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


Hi !

Here is a report bug I posted on bugs@debian.org , we'll make it short ,
I cannot activate udev at boot , if I do this I get IDE errors on both
harddisks and if I can enter an X-session, I cannot open a terminal : I
get following error message :
"there was a problem with the child process of this terminal" . If I
desactivate udev at boot, eveything is going O.K.
The Debian package maintainer thinks it looks like a kernel bug ....
This is why I am posting here hoping for help in this matter.

mahashakti89

PS : Could you CC me your answer, I am not on the list .


THANKS


Package : udev
Version : 0.076-3


#dpkg --status udev
Package
Package : udev
Version:0.076-3
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 960
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Version: 0.076-3
Provides: hotplug
Depends: libc6 (>= 2.3.5-1), libselinux1 (>= 1.26), libsepol1 (>= 1.8),
initscripts (>= 2.85-16), makedev (>= 2.3.1-77), sed (>= 3.95), lsb-base
(>= 3.0-6)
Conflicts: lvm-common (<< 1.5.13), hotplug, module-init-tools (<<
3.2-pre9-1), initramfs-tools (<< 0.39)
Description: /dev/ and hotplug management daemon
udev is a daemon which dynamically creates and removes device nodes from
/dev/, handles hotplug events and loads drivers at boot time. It replaces
the hotplug package and requires a kernel not older than 2.6.12.

II.Descritpion

If I activate udev at boot through some utility like sysvconfig or
sysvconfig I have problem with both IDE Disks
(Maxtor 80 G0 and 250 G0) , I get following error message : Drive Seek
Complete Data Request, Satus 0x 58, Drive not Ready
for command , and sometimes I cannot log into an X-session.

If I can log in, I cannot open a terminal - gnome-terminal , konsole,
xterm - I get following error message :
There was a problem with the child process of this terminal.
It is then impossible to type any command.

If I desactivate udev at boot , everything is O.K , no IDE-errors , no
problems with gnme-terminal, konsole or xterm.


III. Informations
KERNEL VERSION :

/home/claude# uname -a
Linux ishwara 2.6.14-ck6 #1 SMP Sun Nov 27 10:05:42 CET 2005 i686 GNU/Linux

LIBC6 VERSION :

:/home/claude# dpkg -s libc6 | grep ^Version
Version: 2.3.5-8.1

HARDWARE :
Processor = Pentium IV
Motherboard = ASUS P4P800
Chipset = I865 PE
Harddisk 1 =

hdparm -i /dev/hda

/dev/hda:

Model=Maxtor 6Y080P0, FwRev=YAR41BW0, SerialNo=Y31PPXDE
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=7936kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160086528
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null): ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3
ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7

* signifies the current active mode

Harddisk 2 =

hdparm -i /dev/hdb

/dev/hdb:

Model=Maxtor 6L250R0, FwRev=BAH41G10, SerialNo=L6132M9H
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=16384kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null): ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3
ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7

* signifies the current active mode

I didn't touch the basic configuration files of udev except some
personal rules for my modem
and USB-Sticks.


Hope you understand my english.

Thanks

mahashakti89
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFDmplyPPuyRSaD7LoRAk7DAJ0ddxljwM2pRCLCB1ZZPaeeG23vvgCgiM7c
bw2MG2i6kDy2zM0xxV7jbNk=
=1uMy
-----END PGP SIGNATURE-----

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-12-10 10:02    [W:0.028 / U:1.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site