lkml.org 
[lkml]   [2005]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.6.14-mm1 libata pata_via
    Hi Alan,

    On a Via Epia MII 10k running 2.6.14-mm1 I can't seem to fdisk or dd
    /dev/sde or /dev/sdf. I can mount /dev/sde1, which is a small partition
    for /boot, and 'ls /boot' lists the kernels.

    I forgot to write down the errors fdisk and dd generate. I did create
    the nodes in /dev/ with MAKEDEV.

    The two pata disks are master and slave. I might try them on separate
    channels later (especially if you want me to :-)

    /dev/sd[a-d] are sata disks.

    dmesg and lspci -v:


    [cut]
    [42949375.120000] libata version 1.12 loaded.
    [42949375.120000] sata_promise 0000:00:14.0: version 1.02
    [42949375.120000] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12
    [42949375.140000] ata1: SATA max UDMA/133 cmd 0xF8804200 ctl 0xF8804238 bmdma 0x0 irq 12
    [42949375.140000] ata2: SATA max UDMA/133 cmd 0xF8804280 ctl 0xF88042B8 bmdma 0x0 irq 12
    [42949375.140000] ata3: SATA max UDMA/133 cmd 0xF8804300 ctl 0xF8804338 bmdma 0x0 irq 12
    [42949375.140000] ata4: SATA max UDMA/133 cmd 0xF8804380 ctl 0xF88043B8 bmdma 0x0 irq 12
    [42949375.220000] input: AT Translated Set 2 keyboard as /class/input/input0
    [42949375.530000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:407f
    [42949375.530000] ata1: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
    [42949375.530000] ata1: dev 0 configured for UDMA/133
    [42949375.530000] scsi0 : sata_promise
    [42949375.920000] ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:407f
    [42949375.920000] ata2: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
    [42949375.920000] ata2: dev 0 configured for UDMA/133
    [42949375.920000] scsi1 : sata_promise
    [42949376.310000] ata3: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:407f
    [42949376.310000] ata3: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
    [42949376.310000] ata3: dev 0 configured for UDMA/133
    [42949376.310000] scsi2 : sata_promise
    [42949376.700000] ata4: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:407f
    [42949376.700000] ata4: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
    [42949376.700000] ata4: dev 0 configured for UDMA/133
    [42949376.700000] scsi3 : sata_promise
    [42949376.700000] Vendor: ATA Model: Maxtor 6B300S0 Rev: BANC
    [42949376.700000] Type: Direct-Access ANSI SCSI revision: 05
    [42949376.700000] Vendor: ATA Model: Maxtor 6B300S0 Rev: BANC
    [42949376.700000] Type: Direct-Access ANSI SCSI revision: 05
    [42949376.700000] Vendor: ATA Model: Maxtor 6B300S0 Rev: BANC
    [42949376.700000] Type: Direct-Access ANSI SCSI revision: 05
    [42949376.700000] Vendor: ATA Model: Maxtor 6B300S0 Rev: BANC
    [42949376.700000] Type: Direct-Access ANSI SCSI revision: 05
    [42949376.700000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
    [42949376.700000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 5
    [42949376.700000] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xCC00 irq 14
    [42949376.860000] ata5: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:047f
    [42949376.860000] ata5: dev 0 ATA-7, max UDMA/133, 398297088 sectors: LBA48
    [42949376.860000] ata5: dev 1 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:047f
    [42949376.860000] ata5: dev 1 ATA-7, max UDMA/133, 490234752 sectors: LBA48
    [42949376.860000] ata5: dev 0 configured for UDMA/100
    [42949376.860000] ata5: dev 1 configured for UDMA/100
    [42949376.860000] scsi4 : pata_via
    [42949376.860000] Vendor: ATA Model: Maxtor 6Y200P0 Rev: YAR4
    [42949376.860000] Type: Direct-Access ANSI SCSI revision: 05
    [42949376.860000] Vendor: ATA Model: Maxtor 7Y250P0 Rev: YAR4
    [42949376.860000] Type: Direct-Access ANSI SCSI revision: 05
    [42949376.860000] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xCC08 irq 15
    [42949377.030000] ATA: abnormal status 0xFF on port 0x177
    [42949377.030000] ata6: disabling port
    [42949377.030000] scsi5 : pata_via
    [42949377.030000] SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
    [42949377.030000] SCSI device sda: drive cache: write back
    [42949377.030000] SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
    [42949377.030000] SCSI device sda: drive cache: write back
    [42949377.030000] sda: sda1 sda2
    [42949377.050000] sd 0:0:0:0: Attached scsi disk sda
    [42949377.050000] SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB)
    [42949377.050000] SCSI device sdb: drive cache: write back
    [42949377.050000] SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB)
    [42949377.050000] SCSI device sdb: drive cache: write back
    [42949377.050000] sdb: sdb1 sdb2
    [42949377.070000] sd 1:0:0:0: Attached scsi disk sdb
    [42949377.070000] SCSI device sdc: 586114704 512-byte hdwr sectors (300091 MB)
    [42949377.070000] SCSI device sdc: drive cache: write back
    [42949377.070000] SCSI device sdc: 586114704 512-byte hdwr sectors (300091 MB)
    [42949377.070000] SCSI device sdc: drive cache: write back
    [42949377.070000] sdc: sdc1 sdc2
    [42949377.090000] sd 2:0:0:0: Attached scsi disk sdc
    [42949377.090000] SCSI device sdd: 586114704 512-byte hdwr sectors (300091 MB)
    [42949377.090000] SCSI device sdd: drive cache: write back
    [42949377.090000] SCSI device sdd: 586114704 512-byte hdwr sectors (300091 MB)
    [42949377.090000] SCSI device sdd: drive cache: write back
    [42949377.090000] sdd: sdd1 sdd2
    [42949377.110000] sd 3:0:0:0: Attached scsi disk sdd
    [42949377.110000] SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)
    [42949377.110000] SCSI device sde: drive cache: write back
    [42949377.110000] SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)
    [42949377.110000] SCSI device sde: drive cache: write back
    [42949377.110000] sde: sde1 sde2
    [42949377.130000] sd 4:0:0:0: Attached scsi disk sde
    [42949377.130000] SCSI device sdf: 490234752 512-byte hdwr sectors (251000 MB)
    [42949377.130000] SCSI device sdf: drive cache: write back
    [42949377.130000] SCSI device sdf: 490234752 512-byte hdwr sectors (251000 MB)
    [42949377.130000] SCSI device sdf: drive cache: write back
    [42949377.130000] sdf:<3>ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949377.210000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949377.210000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949377.210000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949377.280000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949377.280000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949377.280000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949377.280000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949377.360000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949377.360000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949377.360000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949377.360000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949377.430000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949377.430000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949377.430000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949377.430000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949377.510000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949377.510000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949377.510000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949377.510000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949377.510000] sd 4:0:1:0: SCSI error: return code = 0x8000002
    [42949377.510000] sdf: Current: sense key: Aborted Command
    [42949377.510000] Additional sense: Scsi parity error
    [42949377.510000] Info fld=0x0
    [42949377.510000] end_request: I/O error, dev sdf, sector 0
    [42949377.510000] Buffer I/O error on device sdf, logical block 0
    [42949377.580000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949377.580000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949377.580000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949377.580000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949377.660000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949377.660000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949377.660000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949377.660000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949377.730000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949377.730000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949377.730000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949377.730000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949377.810000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949377.810000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949377.810000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949377.810000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949377.880000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949377.880000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949377.880000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949377.880000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949377.880000] sd 4:0:1:0: SCSI error: return code = 0x8000002
    [42949377.880000] sdf: Current: sense key: Aborted Command
    [42949377.880000] Additional sense: Scsi parity error
    [42949377.880000] Info fld=0x0
    [42949377.880000] end_request: I/O error, dev sdf, sector 0
    [42949377.880000] Buffer I/O error on device sdf, logical block 0
    [42949377.880000] unable to read partition table
    [42949377.880000] sd 4:0:1:0: Attached scsi disk sdf
    [42949377.880000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
    [42949377.880000] Yenta: CardBus bridge found at 0000:00:0a.0 [1106:aa01]
    [42949378.020000] Yenta: ISA IRQ mask 0x0c08, PCI irq 5
    [42949378.020000] Socket status: 30000006
    [42949378.280000] ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12
    [42949378.280000] Yenta: CardBus bridge found at 0000:00:0a.1 [1106:aa01]
    [42949378.420000] Yenta: ISA IRQ mask 0x0c08, PCI irq 12
    [42949378.420000] Socket status: 30000006
    [42949378.680000] DLM (built Nov 8 2005 11:23:33) installed
    [42949378.680000] md: linear personality registered as nr 1
    [42949378.680000] md: raid0 personality registered as nr 2
    [42949378.680000] md: raid1 personality registered as nr 3
    [42949378.680000] md: raid10 personality registered as nr 9
    [42949378.680000] md: raid5 personality registered as nr 4
    [42949378.680000] raid5: automatically using best checksumming function: pIII_sse
    [42949378.730000] pIII_sse : 2684.000 MB/sec
    [42949378.730000] raid5: using function: pIII_sse (2684.000 MB/sec)
    [42949378.900000] raid6: int32x1 166 MB/s
    [42949379.070000] raid6: int32x2 200 MB/s
    [42949379.240000] raid6: int32x4 182 MB/s
    [42949379.410000] raid6: int32x8 135 MB/s
    [42949379.580000] raid6: mmxx1 418 MB/s
    [42949379.750000] raid6: mmxx2 588 MB/s
    [42949379.920000] raid6: sse1x1 362 MB/s
    [42949380.090000] raid6: sse1x2 555 MB/s
    [42949380.090000] raid6: using algorithm sse1x2 (555 MB/s)
    [42949380.090000] md: raid6 personality registered as nr 8
    [42949380.090000] md: multipath personality registered as nr 7
    [42949380.090000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    [42949380.090000] md: bitmap version 4.39
    [42949380.090000] NET: Registered protocol family 2
    [42949380.190000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [42949380.190000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
    [42949380.190000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
    [42949380.190000] TCP: Hash tables configured (established 131072 bind 65536)
    [42949380.190000] TCP reno registered
    [42949380.190000] TCP bic registered
    [42949380.190000] Initializing IPsec netlink socket
    [42949380.190000] NET: Registered protocol family 1
    [42949380.190000] NET: Registered protocol family 10
    [42949380.190000] Disabled Privacy Extensions on device c03d6100(lo)
    [42949380.190000] IPv6 over IPv4 tunneling driver
    [42949380.190000] NET: Registered protocol family 17
    [42949380.250000] SCTP: Hash tables configured (established 65536 bind 65536)
    [42949380.250000] Using IPI Shortcut mode
    [42949380.250000] ACPI wakeup devices:
    [42949380.250000] PCI0 USB0 USB1 USB2 USB3 USB4 USB5 USB6 LAN0 AC97 MC97 UAR1
    [42949380.250000] ACPI: (supports S0 S1 S3 S4 S5)
    [42949380.250000] md: Autodetecting RAID arrays.
    [42949380.340000] md: autorun ...
    [42949380.340000] md: considering sdd1 ...
    [42949380.340000] md: adding sdd1 ...
    [42949380.340000] md: adding sdc1 ...
    [42949380.340000] md: adding sdb1 ...
    [42949380.340000] md: adding sda1 ...
    [42949380.340000] md: created md0
    [42949380.340000] md: bind<sda1>
    [42949380.340000] md: bind<sdb1>
    [42949380.340000] md: bind<sdc1>
    [42949380.340000] md: bind<sdd1>
    [42949380.340000] md: running: <sdd1><sdc1><sdb1><sda1>
    [42949380.340000] raid1: raid set md0 active with 4 out of 4 mirrors
    [42949380.340000] md: ... autorun DONE.
    [42949380.350000] VFS: Mounted root (ext2 filesystem) readonly.
    [42949380.350000] Freeing unused kernel memory: 168k freed
    [42949381.600000] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
    [42949384.390000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
    [42949452.690000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    [42949452.860000] spurious 8259A interrupt: IRQ7.
    [42949463.620000] eth0: no IPv6 routers present
    [42949589.450000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949589.450000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949589.450000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949589.450000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949589.520000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949589.520000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949589.520000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949589.520000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949589.590000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949589.590000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949589.590000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949589.590000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949589.650000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949589.650000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949589.650000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949589.650000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949589.700000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949589.700000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949589.700000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949589.700000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949589.700000] sd 4:0:0:0: SCSI error: return code = 0x8000002
    [42949589.700000] sde: Current: sense key: Aborted Command
    [42949589.700000] Additional sense: Scsi parity error
    [42949589.700000] Info fld=0x0
    [42949589.700000] end_request: I/O error, dev sde, sector 0
    [42949589.700000] Buffer I/O error on device sde, logical block 0
    [42949593.730000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949593.730000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949593.730000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949593.730000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949593.810000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949593.810000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949593.810000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949593.810000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949593.880000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949593.880000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949593.880000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949593.880000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949593.960000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949593.960000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949593.960000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949593.960000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949594.030000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949594.030000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949594.030000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949594.030000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949594.030000] sd 4:0:1:0: SCSI error: return code = 0x8000002
    [42949594.030000] sdf: Current: sense key: Aborted Command
    [42949594.030000] Additional sense: Scsi parity error
    [42949594.030000] Info fld=0x0
    [42949594.030000] end_request: I/O error, dev sdf, sector 0
    [42949594.030000] Buffer I/O error on device sdf, logical block 0
    [42949594.110000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949594.110000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949594.110000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949594.110000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949594.180000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949594.180000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949594.180000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949594.180000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949594.260000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949594.260000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949594.260000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949594.260000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949594.330000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949594.330000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949594.330000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949594.330000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949594.410000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949594.410000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949594.410000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949594.410000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949594.410000] sd 4:0:1:0: SCSI error: return code = 0x8000002
    [42949594.410000] sdf: Current: sense key: Aborted Command
    [42949594.410000] Additional sense: Scsi parity error
    [42949594.410000] Info fld=0x8
    [42949594.410000] end_request: I/O error, dev sdf, sector 8
    [42949594.410000] Buffer I/O error on device sdf, logical block 1
    [42949594.480000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949594.480000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949594.480000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949594.480000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949594.560000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949594.560000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949594.560000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949594.560000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949594.630000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949594.630000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949594.630000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949594.630000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949594.710000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949594.710000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949594.710000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949594.710000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949594.780000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949594.780000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949594.780000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949594.780000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949594.780000] sd 4:0:1:0: SCSI error: return code = 0x8000002
    [42949594.780000] sdf: Current: sense key: Aborted Command
    [42949594.780000] Additional sense: Scsi parity error
    [42949594.780000] Info fld=0x10
    [42949594.780000] end_request: I/O error, dev sdf, sector 16
    [42949594.780000] Buffer I/O error on device sdf, logical block 2
    [42949594.860000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949594.860000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949594.860000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949594.860000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949594.930000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949594.930000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949594.930000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949594.930000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949595.010000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949595.010000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949595.010000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949595.010000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949595.080000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949595.080000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949595.080000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949595.080000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949595.160000] ata5: command error, drv_stat 0x51 host_stat 0x64
    [42949595.160000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
    [42949595.160000] ata5: status=0x51 { DriveReady SeekComplete Error }
    [42949595.160000] ata5: error=0x84 { DriveStatusError BadCRC }
    [42949595.160000] sd 4:0:1:0: SCSI error: return code = 0x8000002
    [42949595.160000] sdf: Current: sense key: Aborted Command
    [42949595.160000] Additional sense: Scsi parity error
    [42949595.160000] Info fld=0x0
    [42949595.160000] end_request: I/O error, dev sdf, sector 0
    [42949595.160000] Buffer I/O error on device sdf, logical block 0



    0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
    Subsystem: VIA Technologies, Inc.: Unknown device aa01
    Flags: bus master, 66MHz, medium devsel, latency 8
    Memory at e7000000 (32-bit, prefetchable) [size=4M]
    Capabilities: [a0] AGP version 2.0
    Capabilities: [c0] Power Management version 2

    0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode])
    Flags: bus master, 66MHz, medium devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    Memory behind bridge: e4000000-e5ffffff
    Prefetchable memory behind bridge: e0000000-e3ffffff
    Capabilities: [80] Power Management version 2

    0000:00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
    Subsystem: VIA Technologies, Inc.: Unknown device aa01
    Flags: bus master, medium devsel, latency 168, IRQ 5
    Memory at e742b000 (32-bit, non-prefetchable) [size=4K]
    Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
    Memory window 0: 40000000-41fff000 (prefetchable)
    Memory window 1: 42000000-43fff000
    I/O window 0: 00001000-00001fff
    I/O window 1: 00002000-00002fff
    16-bit legacy interface ports at 0001

    0000:00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
    Subsystem: VIA Technologies, Inc.: Unknown device aa01
    Flags: bus master, medium devsel, latency 168, IRQ 12
    Memory at e7423000 (32-bit, non-prefetchable) [size=4K]
    Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
    Memory window 0: 44000000-45fff000 (prefetchable)
    Memory window 1: 46000000-47fff000
    I/O window 0: 00003000-00003fff
    I/O window 1: 00004000-00004fff
    16-bit legacy interface ports at 0001

    0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc.: Unknown device aa01
    Flags: bus master, medium devsel, latency 32, IRQ 5
    I/O ports at c000 [size=32]
    Capabilities: [80] Power Management version 2

    0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc.: Unknown device aa01
    Flags: bus master, medium devsel, latency 32, IRQ 12
    I/O ports at c400 [size=32]
    Capabilities: [80] Power Management version 2

    0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc.: Unknown device aa01
    Flags: bus master, medium devsel, latency 32, IRQ 7
    I/O ports at c800 [size=32]
    Capabilities: [80] Power Management version 2

    0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
    Subsystem: VIA Technologies, Inc. USB 2.0
    Flags: bus master, medium devsel, latency 32, IRQ 9
    Memory at e7428000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2

    0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
    Subsystem: VIA Technologies, Inc.: Unknown device aa01
    Flags: bus master, stepping, medium devsel, latency 0
    Capabilities: [c0] Power Management version 2

    0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
    Subsystem: VIA Technologies, Inc.: Unknown device aa01
    Flags: bus master, medium devsel, latency 32, IRQ 5
    I/O ports at cc00 [size=16]
    Capabilities: [c0] Power Management version 2

    0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
    Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235
    Flags: bus master, medium devsel, latency 32, IRQ 5
    I/O ports at d400 [size=256]
    Memory at e7429000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [40] Power Management version 2

    0000:00:14.0 Mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02)
    Subsystem: Promise Technology, Inc. PDC20318 (SATA150 TX4)
    Flags: bus master, 66MHz, medium devsel, latency 96, IRQ 12
    I/O ports at d800 [size=64]
    I/O ports at dc00 [size=16]
    I/O ports at e000 [size=128]
    Memory at e742a000 (32-bit, non-prefetchable) [size=4K]
    Memory at e7400000 (32-bit, non-prefetchable) [size=128K]
    Expansion ROM at 48000000 [disabled] [size=16K]
    Capabilities: [60] Power Management version 2

    0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03) (prog-if 00 [VGA])
    Subsystem: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics
    Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 5
    Memory at e0000000 (32-bit, prefetchable) [size=64M]
    Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
    Expansion ROM at e5000000 [disabled] [size=64K]
    Capabilities: [60] Power Management version 2
    Capabilities: [70] AGP version 2.0

    --
    Humilis IT Services and Solutions
    http://www.humilis.net
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-11-08 13:15    [W:0.068 / U:91.804 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site