lkml.org 
[lkml]   [2005]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] dvb: nxt200x: Add function for nxt200x to change pll input
Michael Krufky wrote:

>From: Kirk Lapray <kirk.lapray@gmail.com>
>
>- Added function for nxt200x to change pll input
>- For VSB set to input 0, for QAM set to input 1
>- will only be set for cards that have set_pll_input defined
>
>Signed-off-by: Kirk Lapray <kirk.lapray@gmail.com>
>Signed-off-by: Michael Krufky <mkrufky@m1k.net>
>
> drivers/media/dvb/frontends/nxt200x.c | 9 +++++++--
> drivers/media/dvb/frontends/nxt200x.h | 3 +++
> 2 files changed, 10 insertions(+), 2 deletions(-)
>
>--- linux-2.6.14-git5.orig/drivers/media/dvb/frontends/nxt200x.c
>+++ linux-2.6.14-git5/drivers/media/dvb/frontends/nxt200x.c
>@@ -556,13 +556,18 @@ static int nxt200x_setup_frontend_parame
> if (state->config->set_ts_params)
> state->config->set_ts_params(fe, 1);
>
>- /* set to use cable input */
>- buf[3] |= 0x08;
>+ /* set input */
>+ if (state->config->set_pll_input)
>+ state->config->set_pll_input(buf, 1);
> break;
> case VSB_8:
> /* Set non-punctured clock for VSB */
> if (state->config->set_ts_params)
> state->config->set_ts_params(fe, 0);
>+
>+ /* set input */
>+ if (state->config->set_pll_input)
>+ state->config->set_pll_input(buf, 0);
> break;
> default:
> return -EINVAL;
>--- linux-2.6.14-git5.orig/drivers/media/dvb/frontends/nxt200x.h
>+++ linux-2.6.14-git5/drivers/media/dvb/frontends/nxt200x.h
>@@ -42,6 +42,9 @@ struct nxt200x_config
> u8 pll_address;
> struct dvb_pll_desc *pll_desc;
>
>+ /* used to set pll input */
>+ int (*set_pll_input)(u8* buf, int input);
>+
> /* need to set device param for start_dma */
> int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
> };
>
Before anybody says it, I am aware of the whitespace issue right here.
It is all over dvb-kernel, and we will be fixing this all at once, in a
later patch.

Thank you,

Michael Krufky
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-11-04 06:04    [W:0.067 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site