lkml.org 
[lkml]   [2005]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: S.M.A.R.T. command passthru to Firewire devices
From
Date
On Iau, 2005-11-24 at 15:01 +0100, Bernd Bartmann wrote:
> When I try to run "smartctl -a /dev/sdb" it tells me that "Device does
> not support SMART". /dev/sdb is a normal hdd in an external firewire
> enclosure. To me this looks like the firewire SCSI layer does not
> support the passthru of the S.M.A.R.T. commands. Or is there any other
> way to query the S.M.A.R.T. status of an hdd attached via Firewire?

If it takes an ATA drive then you will probably be seeing the fact that
most firewire<->ATA convertor units don't support SMART so don't offer
it over their SCSI interface.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-11-24 16:28    [W:0.065 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site