lkml.org 
[lkml]   [2005]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5] Centralise NO_IRQ definition
Date
Move the definition of NO_IRQ from asm directories to <linux/hardirq.h>.
All existing definitions were already -1.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Acked-by: Ingo Molnar <mingo@elte.hu>

---

include/asm-arm/irq.h | 8 --------
include/asm-arm26/irq.h | 8 --------
include/asm-frv/irq.h | 3 ---
include/asm-parisc/irq.h | 2 --
include/asm-powerpc/irq.h | 3 ---
include/linux/hardirq.h | 8 ++++++++
6 files changed, 8 insertions(+), 24 deletions(-)

applies-to: c2fd3b28a74be2ae6274c85c7a9538c7bf1dd949
604c0538936822cbb1c0958f0f835cbbaf723530
diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h
index 59975ee..0545e36 100644
--- a/include/asm-arm/irq.h
+++ b/include/asm-arm/irq.h
@@ -11,14 +11,6 @@
#define NR_IRQS 128
#endif

-/*
- * Use this value to indicate lack of interrupt
- * capability
- */
-#ifndef NO_IRQ
-#define NO_IRQ ((unsigned int)(-1))
-#endif
-
struct irqaction;

extern void disable_irq_nosync(unsigned int);
diff --git a/include/asm-arm26/irq.h b/include/asm-arm26/irq.h
index 06bd5a5..7957d4e 100644
--- a/include/asm-arm26/irq.h
+++ b/include/asm-arm26/irq.h
@@ -14,14 +14,6 @@
#endif


-/*
- * Use this value to indicate lack of interrupt
- * capability
- */
-#ifndef NO_IRQ
-#define NO_IRQ ((unsigned int)(-1))
-#endif
-
struct irqaction;

#define disable_irq_nosync(i) disable_irq(i)
diff --git a/include/asm-frv/irq.h b/include/asm-frv/irq.h
index 2c16d8d..fbc5bd7 100644
--- a/include/asm-frv/irq.h
+++ b/include/asm-frv/irq.h
@@ -20,9 +20,6 @@
* drivers
*/

-/* this number is used when no interrupt has been assigned */
-#define NO_IRQ (-1)
-
#define NR_IRQ_LOG2_ACTIONS_PER_GROUP 5
#define NR_IRQ_ACTIONS_PER_GROUP (1 << NR_IRQ_LOG2_ACTIONS_PER_GROUP)
#define NR_IRQ_GROUPS 4
diff --git a/include/asm-parisc/irq.h b/include/asm-parisc/irq.h
index b0a30e2..26ab3be 100644
--- a/include/asm-parisc/irq.h
+++ b/include/asm-parisc/irq.h
@@ -11,8 +11,6 @@
#include <linux/cpumask.h>
#include <asm/types.h>

-#define NO_IRQ (-1)
-
#ifdef CONFIG_GSC
#define GSC_IRQ_BASE 16
#define GSC_IRQ_MAX 63
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
index 8eb7e85..1b41206 100644
--- a/include/asm-powerpc/irq.h
+++ b/include/asm-powerpc/irq.h
@@ -15,9 +15,6 @@
#include <asm/types.h>
#include <asm/atomic.h>

-/* this number is used when no interrupt has been assigned */
-#define NO_IRQ (-1)
-
/*
* These constants are used for passing information about interrupt
* signal polarity and level/edge sensing to the low-level PIC chip
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 71d2b8a..9ee4946 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -87,6 +87,14 @@ extern void synchronize_irq(unsigned int
# define synchronize_irq(irq) barrier()
#endif

+/*
+ * This value means "Device has no interrupt". For most pieces of code,
+ * any value above NR_IRQS would do, but -1 is traditional. The PCI
+ * subsystem currently uses 0, but that's a legal IRQ number on some
+ * architectures.
+ */
+#define NO_IRQ ((unsigned int)(-1))
+
#define nmi_enter() irq_enter()
#define nmi_exit() sub_preempt_count(HARDIRQ_OFFSET)

---
0.99.8.GIT
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-11-21 02:18    [W:0.089 / U:18.464 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site