lkml.org 
[lkml]   [2005]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [linux-pm] 2.6.14-rc1-mm1: usb breaks suspend
On Mon, 17 Oct 2005, Rafael J. Wysocki wrote:

> Hi,
>
> On Monday, 17 of October 2005 20:54, Alan Stern wrote:
> > On Mon, 17 Oct 2005, Pavel Machek wrote:
> >
> > > Hi!
> > >
> > > In -mm, usb breaks suspend to disk. Compiled without
> > > CONFIG_USB_SUSPEND, it just plainly fails; iwth USB_SUSPEND, it
> > > actually tries to suspend USB, but it fails and machine refuses to
> > > suspend. Is it known or is it worth debugging?
> >
> > More details please.
>
> Fails for me too on x86-64, with the following messages:
>
> Stopping tasks: ========================|
> Freeing memory... done (14642 pages freed)
> Suspending device card0-0
> Suspending device 2-2:1.0
> Suspending device 2-2
> Suspending device 3-0:1.0
> hub 3-0:1.0: no suspend?
> Suspending device usb3
> Could not suspend device usb3: error -16
> Some devices failed to suspend
> Restarting tasks... done
>
> where the USB-related info returned by the kernel is this:
>
> ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11
> ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 11 (level, low) -> IRQ 11
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> ohci_hcd 0000:00:02.0: OHCI Host Controller
> ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
> ohci_hcd 0000:00:02.0: irq 11, io mem 0xfebfb000
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 3 ports detected
> ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 11
> ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 11 (level, low) -> IRQ 11
> PCI: Setting latency timer of device 0000:00:02.1 to 64
> ohci_hcd 0000:00:02.1: OHCI Host Controller
> ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:02.1: irq 11, io mem 0xfebfc000
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 3 ports detected
> ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 5
> usb 2-2: new low speed USB device using ohci_hcd and address 2
> PCI: setting IRQ 5 as level-triggered
> ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 5 (level, low) -> IRQ 5
> PCI: Setting latency timer of device 0000:00:02.2 to 64
> ehci_hcd 0000:00:02.2: EHCI Host Controller
> ehci_hcd 0000:00:02.2: debug port 1
> ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
> ehci_hcd 0000:00:02.2: irq 5, io mem 0xfebfdc00
> PCI: cache line size of 64 is not supported by device 0000:00:02.2
> ehci_hcd 0000:00:02.2: park 0
> ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
> usb 2-2: device descriptor read/all, error -110
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 6 ports detected
> ohci_hcd 0000:00:02.1: wakeup
> usb 2-2: new low speed USB device using ohci_hcd and address 4
> usbcore: registered new driver hiddev
> input: Logitech USB Receiver//class/input_dev as input3
> input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-2
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>
> Greetings,
> Rafael

Weird.

I can't tell what happened. But I can tell you that USB development
goes on in Greg K-H's tree. The current version is available as a patch
based on 2.6.14-rc4:

http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/gregkh-all-2.6.14-rc4.patch

On top of that you should apply the patch for uhci-hcd that I mentioned
before. With this combination I have had no problem suspending three
different machines. Sometimes they even wake up, too! :-)

Be warned: That particular kernel has a bug which sometimes causes
"modprobe ehci-hcd" to hang. In case this happens to you, I've included a
patch below with a temporary workaround. Untested, but it should work.

Alan Stern



--- a/drivers/usb/host/ehci-pci.c Thu Oct 13 17:04:13 2005
+++ b/drivers/usb/host/ehci-pci.c Mon Oct 17 20:57:21 2005
@@ -66,6 +66,7 @@
u32 temp;
unsigned count = 256/4;

+ spin_lock_init (&ehci->lock);
ehci->caps = hcd->regs;
ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
dbg_hcs_params(ehci, "reset");
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-10-18 03:03    [W:0.057 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site