Messages in this thread | | | Date | Mon, 3 Jan 2005 13:52:00 +0100 | From | Jan Kasprzak <> | Subject | Altix hang on boot with 2.6.8+ |
| |
Hi all,
I cannot boot a 2.6.8 or 2.6.10 kernel on my SGI Altix - it hangs during boot after printing this:
[...] CPU 0: base freq=200.000MHz, ITC ratio=14/2, ITC freq=1400.000MHz+/--1ppm Console: colour dummy device 80x25
(from the 2.4 boot messages it seems that tha BogoMips test should be the next line). 2.6.6 boots fine. I have also tried CONFIG_EFI_PCDP and console=hcdp.
The system is 3-node (6-cpu) Altix 350 running SLES 8. Can 2.6.8+ boot on Altix 350? I may test 2.6.7 or -rc* if you want.
Full boot messages are here:
Linux version 2.6.8 (root@hostname) (gcc version 3.2.2) #2 SMP Mon Jan 3 13:35:16 CET 2005 EFI v1.02 by SGI: SALsystab=0x3002514a60 ACPI 2.0=0x3002514b60 ACPI: RSDP (v002 SGI ) @ 0x0000003002514b60 ACPI: XSDT (v001 SGI XSDTSN2 0x00010001 0x00000001) @ 0x00000030027a07d0 ACPI: MADT (v001 SGI APICSN2 0x00010001 0x00000001) @ 0x0000003002514ba0 ACPI: SRAT (v001 SGI SRATSN2 0x00010001 0x00000001) @ 0x00000030027a0830 ACPI: SLIT (v001 SGI SLITSN2 0x00010001 0x00000001) @ 0x0000003002514c30 ACPI: FADT (v003 SGI FACPSN2 0x00030001 0x00000001) @ 0x00000030027a09a0 ACPI: DSDT (v001 SGI DSDTSN2 0x00010001 0x00000001) @ 0x0000003002514c80 ACPI: DSDT (v001 SGI DSDTSN2 0x00010001 0x00000001) @ 0x0000000000000000 ACPI: SRAT revision 0 ACPI: SLIT localities 3x3 Number of logical nodes in system = 3 Number of memory chunks in system = 3 SAL 2.9: SGI SN2 version 4.4 SAL Platform features: ITC_Drift SAL: AP wakeup using external interrupt vector 0x12 ACPI: Local APIC address 0xc0000000fee00000 ACPI: Error parsing MADT - no IOSAPIC entries register_intr: No IOSAPIC for GSI 52 GSI 52 (level, low) -> CPU 0 (0x0000) vector 48 6 CPUs available, 6 CPUs total Registering legacy COM ports for serial console Increasing MCA rendezvous timeout from 20000 to 49000 milliseconds MCA related initialization done SGI SAL version 4.04 Virtual mem_map starts at 0xa0007ffef2138000 Built 3 zonelists Kernel command line: BOOT_IMAGE=scsi0:/vmlinuz-2.6.10 root=900 ide=nodma hwprobe=-bios ro console=ttyS0 ide_setup: ide=nodmaIDE: Prevented DMA PID hash table entries: 4096 (order 12: 65536 bytes) CPU 0: base freq=200.000MHz, ITC ratio=14/2, ITC freq=1400.000MHz+/--1ppm Console: colour dummy device 80x25 Linux version 2.6.8 (root@hostname) (gcc version 3.2.2) #2 SMP Mon Jan 3 13:35:16 CET 2005 EFI v1.02 by SGI: SALsystab=0x3002514a60 ACPI 2.0=0x3002514b60 ACPI: RSDP (v002 SGI ) @ 0x0000003002514b60 ACPI: XSDT (v001 SGI XSDTSN2 0x00010001 0x00000001) @ 0x00000030027a07d0 ACPI: MADT (v001 SGI APICSN2 0x00010001 0x00000001) @ 0x0000003002514ba0 ACPI: SRAT (v001 SGI SRATSN2 0x00010001 0x00000001) @ 0x00000030027a0830 ACPI: SLIT (v001 SGI SLITSN2 0x00010001 0x00000001) @ 0x0000003002514c30 ACPI: FADT (v003 SGI FACPSN2 0x00030001 0x00000001) @ 0x00000030027a09a0 ACPI: DSDT (v001 SGI DSDTSN2 0x00010001 0x00000001) @ 0x0000003002514c80 ACPI: DSDT (v001 SGI DSDTSN2 0x00010001 0x00000001) @ 0x0000000000000000 ACPI: SRAT revision 0 ACPI: SLIT localities 3x3 Number of logical nodes in system = 3 Number of memory chunks in system = 3 SAL 2.9: SGI SN2 version 4.4 SAL Platform features: ITC_Drift SAL: AP wakeup using external interrupt vector 0x12 ACPI: Local APIC address 0xc0000000fee00000 ACPI: Error parsing MADT - no IOSAPIC entries register_intr: No IOSAPIC for GSI 52 GSI 52 (level, low) -> CPU 0 (0x0000) vector 48 6 CPUs available, 6 CPUs total Registering legacy COM ports for serial console Increasing MCA rendezvous timeout from 20000 to 49000 milliseconds MCA related initialization done SGI SAL version 4.04 Virtual mem_map starts at 0xa0007ffef2138000 Built 3 zonelists Kernel command line: BOOT_IMAGE=scsi0:/vmlinuz-2.6.10 root=900 ide=nodma hwprobe=-bios ro console=ttyS0 ide_setup: ide=nodmaIDE: Prevented DMA PID hash table entries: 4096 (order 12: 65536 bytes) CPU 0: base freq=200.000MHz, ITC ratio=14/2, ITC freq=1400.000MHz+/--1ppm Console: colour dummy device 80x25
Thanks,
-Yenya
-- | Jan "Yenya" Kasprzak <kas at {fi.muni.cz - work | yenya.net - private}> | | GPG: ID 1024/D3498839 Fingerprint 0D99A7FB206605D7 8B35FCDE05B18A5E | | http://www.fi.muni.cz/~kas/ Czech Linux Homepage: http://www.linux.cz/ | > Whatever the Java applications and desktop dances may lead to, Unix will < > still be pushing the packets around for a quite a while. --Rob Pike < - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |