lkml.org 
[lkml]   [2005]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: 2.6.10-mm1 [failure on AMD64]
    Date
    On Monday, January 3, 2005 3:29 pm, Rafael J. Wysocki wrote:
    > On a dual-Opteron w/ NUMA I had to apply the Jesse's patch to compile the
    > kernel, but it does not boot. It only prints this to the serial console:
    >
    > Bootdata ok (command line is root=/dev/sdb3 vga=792 earlyprintk=ttyS0,57600
    > console=ttyS0,57600 console=tty0)
    > Linux version 2.6.10-mm1 (rafael@chimera) (gcc version 3.3.4 (pre 3.3.5
    > 20040809)) #1 SMP Mon Jan 3 23:09:30 CET 2005
    > BIOS-provided physical RAM map:
    > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    > BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    > BIOS-e820: 000000003fff0000 - 000000003ffff000 (ACPI data)
    > BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
    > BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
    > kernel direct mapping tables upto ffff810100000000 @ 8000-c000
    > Scanning NUMA topology in Northbridge 24
    > Number of nodes 2 (10010)
    > Node 0 already present. Skipping
    > Node 1 already present. Skipping
    > No NUMA configuration found
    > Faking a node at 0000000000000000-000000003fff0000
    > Bootmem setup node 0 0000000000000000-000000003fff0000
    > No mptable found.
    > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    > Processor #0 15:5 APIC version 16
    > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    > Processor #1 15:5 APIC version 16
    > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    > IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    > ACPI: IOAPIC (id[0x03] address[0xfc9fe000] gsi_base[24])
    > IOAPIC[1]: apic_id 3, version 17, address 0xfc9fe000, GSI 24-27
    > ACPI: IOAPIC (id[0x04] address[0xfc9ff000] gsi_base[28])
    > IOAPIC[2]: apic_id 4, version 17, address 0xfc9ff000, GSI 28-31
    > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    > Setting APIC routing to flat
    > Using ACPI (MADT) for SMP configuration information
    > Checking aperture...
    > CPU 0: aperture @ f0000000 size 128 MB
    > CPU 1: aperture @ f0000000 size 128 MB
    >
    > and then it goes into an infinite loop that writes some garbage to the
    > framebuffer (yellow lines on top of the screen).
    >
    > On a UP AMD64 it boots, but then it does not work appropriately (eg. at KDE
    > startup the box hangs for a while and I get the message like "The process
    > for the file protocol has terminated unexpectedly" and desktop icons are
    > not displayed, and I get a "cpu overload" message from arts etc.).
    >
    > Please let me know if you need more information.

    Try wli's patch, subject "[bootfix] pass used_node_mask by reference in
    2.6.10-mm1".

    Jesse
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 14:09    [W:4.007 / U:0.180 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site