lkml.org 
[lkml]   [2005]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[2.6 patch] non-PC parport config change
This patch adds a config option PARPORT_NOT_PC (and removes the 
PARPORT_OTHER option) and lets all non-PC parallel ports options depend
on it.

Advantages:
- the config structure is IMHO a bit more logical
- the mega #if in parport.h is gone now

Additionally, it removes the unneeded PARPORT_NEED_GENERIC_OPS #define.

Signed-off-by: Adrian Bunk <bunk@stusta.de>

---

diffstat output:
drivers/parport/Kconfig | 28 +++++++++++++---------------
drivers/usb/Kconfig | 1 +
include/linux/parport.h | 12 +++++-------
3 files changed, 19 insertions(+), 22 deletions(-)

This patch was already sent on:
- 9 Dec 2004

--- linux-2.6.10-rc2-mm4-full/include/linux/parport.h.old 2004-12-09 04:50:26.000000000 +0100
+++ linux-2.6.10-rc2-mm4-full/include/linux/parport.h 2004-12-09 12:59:06.000000000 +0100
@@ -105,8 +105,6 @@
#include <asm/ptrace.h>
#include <asm/semaphore.h>

-#define PARPORT_NEED_GENERIC_OPS
-
/* Define this later. */
struct parport;
struct pardevice;
@@ -520,9 +518,8 @@
extern int parport_device_proc_unregister(struct pardevice *device);

/* If PC hardware is the only type supported, we can optimise a bit. */
-#if (defined(CONFIG_PARPORT_PC) || defined(CONFIG_PARPORT_PC_MODULE)) && !(defined(CONFIG_PARPORT_ARC) || defined(CONFIG_PARPORT_ARC_MODULE)) && !(defined(CONFIG_PARPORT_AMIGA) || defined(CONFIG_PARPORT_AMIGA_MODULE)) && !(defined(CONFIG_PARPORT_MFC3) || defined(CONFIG_PARPORT_MFC3_MODULE)) && !(defined(CONFIG_PARPORT_ATARI) || defined(CONFIG_PARPORT_ATARI_MODULE)) && !(defined(CONFIG_USB_USS720) || defined(CONFIG_USB_USS720_MODULE)) && !(defined(CONFIG_PARPORT_SUNBPP) || defined(CONFIG_PARPORT_SUNBPP_MODULE)) && !defined(CONFIG_PARPORT_OTHER)
+#if !defined(CONFIG_PARPORT_NOT_PC)

-#undef PARPORT_NEED_GENERIC_OPS
#include <linux/parport_pc.h>
#define parport_write_data(p,x) parport_pc_write_data(p,x)
#define parport_read_data(p) parport_pc_read_data(p)
@@ -534,9 +531,9 @@
#define parport_disable_irq(p) parport_pc_disable_irq(p)
#define parport_data_forward(p) parport_pc_data_forward(p)
#define parport_data_reverse(p) parport_pc_data_reverse(p)
-#endif

-#ifdef PARPORT_NEED_GENERIC_OPS
+#else /* !CONFIG_PARPORT_NOT_PC */
+
/* Generic operations vector through the dispatch table. */
#define parport_write_data(p,x) (p)->ops->write_data(p,x)
#define parport_read_data(p) (p)->ops->read_data(p)
@@ -548,7 +545,8 @@
#define parport_disable_irq(p) (p)->ops->disable_irq(p)
#define parport_data_forward(p) (p)->ops->data_forward(p)
#define parport_data_reverse(p) (p)->ops->data_reverse(p)
-#endif
+
+#endif /* !CONFIG_PARPORT_NOT_PC */

#endif /* __KERNEL__ */
#endif /* _PARPORT_H_ */
--- linux-2.6.10-rc2-mm4-full/drivers/parport/Kconfig.old 2004-12-09 04:45:30.000000000 +0100
+++ linux-2.6.10-rc2-mm4-full/drivers/parport/Kconfig 2004-12-09 04:49:21.000000000 +0100
@@ -88,13 +88,21 @@
Say Y here if you need PCMCIA support for your PC-style parallel
ports. If unsure, say N.

+config PARPORT_NOT_PC
+ bool "Support non-PC-style parallel ports"
+ depends on PARPORT
+ help
+ Say Y here if you want to use non-PC-style parallel ports.
+
+ This causes a performance loss, so most people say N.
+
config PARPORT_ARC
tristate "Archimedes hardware"
- depends on ARM && PARPORT
+ depends on ARM && PARPORT_NOT_PC

config PARPORT_AMIGA
tristate "Amiga builtin port"
- depends on AMIGA && PARPORT
+ depends on AMIGA && PARPORT_NOT_PC
help
Say Y here if you need support for the parallel port hardware on
Amiga machines. This code is also available as a module (say M),
@@ -102,7 +110,7 @@

config PARPORT_MFC3
tristate "Multiface III parallel port"
- depends on ZORRO && PARPORT
+ depends on ZORRO && PARPORT_NOT_PC
help
Say Y here if you need parallel port support for the MFC3 card.
This code is also available as a module (say M), called
@@ -110,7 +118,7 @@

config PARPORT_ATARI
tristate "Atari hardware"
- depends on ATARI && PARPORT
+ depends on ATARI && PARPORT_NOT_PC
help
Say Y here if you need support for the parallel port hardware on
Atari machines. This code is also available as a module (say M),
@@ -123,22 +131,12 @@

config PARPORT_SUNBPP
tristate "Sparc hardware (EXPERIMENTAL)"
- depends on SBUS && EXPERIMENTAL && PARPORT
+ depends on SBUS && EXPERIMENTAL && PARPORT_NOT_PC
help
This driver provides support for the bidirectional parallel port
found on many Sun machines. Note that many of the newer Ultras
actually have pc style hardware instead.

-# If exactly one hardware type is selected then parport will optimise away
-# support for loading any others. Defeat this if the user is keen.
-config PARPORT_OTHER
- bool "Support foreign hardware"
- depends on PARPORT
- help
- Say Y here if you want to be able to load driver modules to support
- other non-standard types of parallel ports. This causes a
- performance loss, so most people say N.
-
config PARPORT_1284
bool "IEEE 1284 transfer modes"
depends on PARPORT
--- linux-2.6.10-rc2-mm4-full/drivers/usb/Kconfig.old 2004-12-09 04:49:57.000000000 +0100
+++ linux-2.6.10-rc2-mm4-full/drivers/usb/Kconfig 2004-12-09 04:50:17.000000000 +0100
@@ -62,6 +62,7 @@
config USB_USS720
tristate "USS720 parport driver"
depends on USB && PARPORT
+ select PARPORT_NOT_PC
---help---
This driver is for USB parallel port adapters that use the Lucent
Technologies USS-720 chip. These cables are plugged into your USB
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 14:09    [W:0.047 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site