lkml.org 
[lkml]   [2004]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH] allow i8042 register location override
Date
On Thursday 02 September 2004 04:29 pm, Bjorn Helgaas wrote:
> On Thursday 02 September 2004 11:56 am, Dmitry Torokhov wrote:
> > > +static unsigned long i8042_command_reg = I8042_COMMAND_REG;
> > > +static unsigned long i8042_status_reg = I8042_STATUS_REG;
> > > +static unsigned long i8042_data_reg = I8042_DATA_REG;
>
> > This will not work as these macros are not constants, see i8042-*io.h
> > and i8042_platform_init().
>
> Thanks for pointing this out. What do you think of the attached?
>

Still not quite right...

> + i8042_aux_values.irq = I8042_AUX_IRQ;
> + i8042_kbd_values.irq = I8042_KBD_IRQ;
> +}
> +
> int __init i8042_init(void)
> {
> int i;
> @@ -1077,12 +1090,11 @@
> init_timer(&i8042_timer);
> i8042_timer.function = i8042_timer_func;
>
> + i8042_init_defaults();
> +
> if (i8042_platform_init())
> return -EBUSY;
>
> - i8042_aux_values.irq = I8042_AUX_IRQ;
> - i8042_kbd_values.irq = I8042_KBD_IRQ;
> -

The .irq values have to be set _after_ doing i8042_platform_init().

What do you think about the patch below? I renamed some function/variable
names to be more in line with the rest of i8042 code, other than that
its pretty much your code.

--
Dmitry


===================================================================


ChangeSet@1.1913, 2004-09-03 01:52:52-05:00, dtor_core@ameritech.net
Input: Add ACPI-based i8042 keyboard and aux controller enumeration;
can be disabled by passing i8042.noacpi as a boot parameter.

Original code by Bjorn Helgaas <bjorn.helgaas@hp.com>

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>


Documentation/kernel-parameters.txt | 2
drivers/input/serio/i8042-io.h | 51 ------
drivers/input/serio/i8042-x86ia64io.h | 272 ++++++++++++++++++++++++++++++++++
drivers/input/serio/i8042.c | 6
drivers/input/serio/i8042.h | 2
5 files changed, 289 insertions(+), 44 deletions(-)


===================================================================



diff -Nru a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
--- a/Documentation/kernel-parameters.txt 2004-09-03 01:54:25 -05:00
+++ b/Documentation/kernel-parameters.txt 2004-09-03 01:54:25 -05:00
@@ -464,6 +464,8 @@
i8042.dumbkbd [HW] Pretend that controlled can only read data from
keyboard and can not control its state
(Don't attempt to blink the leds)
+ i8042.noacpi [HW] Don't use ACPI to discover KBD/AUX controller
+ settings
i8042.noaux [HW] Don't check for auxiliary (== mouse) port
i8042.nomux [HW] Don't check presence of an active multiplexing
controller
diff -Nru a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
--- a/drivers/input/serio/i8042-io.h 2004-09-03 01:54:25 -05:00
+++ b/drivers/input/serio/i8042-io.h 2004-09-03 01:54:25 -05:00
@@ -3,7 +3,7 @@

/*
* This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
+ * under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/

@@ -22,9 +22,6 @@
#ifdef __alpha__
# define I8042_KBD_IRQ 1
# define I8042_AUX_IRQ (RTC_PORT(0) == 0x170 ? 9 : 12) /* Jensen is special */
-#elif defined(__ia64__)
-# define I8042_KBD_IRQ isa_irq_to_vector(1)
-# define I8042_AUX_IRQ isa_irq_to_vector(12)
#elif defined(__arm__)
/* defined in include/asm-arm/arch-xxx/irqs.h */
#include <asm/irq.h>
@@ -39,8 +36,8 @@
* Register numbers.
*/

-#define I8042_COMMAND_REG 0x64
-#define I8042_STATUS_REG 0x64
+#define I8042_COMMAND_REG 0x64
+#define I8042_STATUS_REG 0x64
#define I8042_DATA_REG 0x60

static inline int i8042_read_data(void)
@@ -56,66 +53,32 @@
static inline void i8042_write_data(int val)
{
outb(val, I8042_DATA_REG);
- return;
}

static inline void i8042_write_command(int val)
{
outb(val, I8042_COMMAND_REG);
- return;
}

-#if defined(__i386__)
-
-#include <linux/dmi.h>
-
-static struct dmi_system_id __initdata i8042_dmi_table[] = {
- {
- .ident = "Compaq Proliant 8500",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
- DMI_MATCH(DMI_PRODUCT_NAME , "ProLiant"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "8500"),
- },
- },
- {
- .ident = "Compaq Proliant DL760",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
- DMI_MATCH(DMI_PRODUCT_NAME , "ProLiant"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "DL760"),
- },
- },
- { }
-};
-#endif
-
static inline int i8042_platform_init(void)
{
/*
- * On ix86 platforms touching the i8042 data register region can do really
- * bad things. Because of this the region is always reserved on ix86 boxes.
+ * On some platforms touching the i8042 data register region can do really
+ * bad things. Because of this the region is always reserved on such boxes.
*/
-#if !defined(__i386__) && !defined(__sh__) && !defined(__alpha__) && !defined(__x86_64__) && !defined(__mips__)
+#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__)
if (!request_region(I8042_DATA_REG, 16, "i8042"))
return -1;
#endif

-#if !defined(__i386__) && !defined(__x86_64__)
i8042_reset = 1;
-#endif
-
-#if defined(__i386__)
- if (dmi_check_system(i8042_dmi_table))
- i8042_noloop = 1;
-#endif

return 0;
}

static inline void i8042_platform_exit(void)
{
-#if !defined(__i386__) && !defined(__sh__) && !defined(__alpha__) && !defined(__x86_64__)
+#if !defined(__sh__) && !defined(__alpha__)
release_region(I8042_DATA_REG, 16);
#endif
}
diff -Nru a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/drivers/input/serio/i8042-x86ia64io.h 2004-09-03 01:54:25 -05:00
@@ -0,0 +1,272 @@
+#ifndef _I8042_X86IA64IO_H
+#define _I8042_X86IA64IO_H
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * Names.
+ */
+
+#define I8042_KBD_PHYS_DESC "isa0060/serio0"
+#define I8042_AUX_PHYS_DESC "isa0060/serio1"
+#define I8042_MUX_PHYS_DESC "isa0060/serio%d"
+
+/*
+ * IRQs.
+ */
+
+#if defined(__ia64__)
+# define I8042_MAP_IRQ(x) isa_irq_to_vector((x))
+#else
+# define I8042_MAP_IRQ(x) (x)
+#endif
+
+#define I8042_KBD_IRQ i8042_kbd_irq
+#define I8042_AUX_IRQ i8042_aux_irq
+
+static int i8042_kbd_irq = I8042_MAP_IRQ(1);
+static int i8042_aux_irq = I8042_MAP_IRQ(12);
+
+/*
+ * Register numbers.
+ */
+
+#define I8042_COMMAND_REG i8042_command_reg
+#define I8042_STATUS_REG i8042_command_reg
+#define I8042_DATA_REG i8042_data_reg
+
+static int i8042_command_reg = 0x64;
+static int i8042_data_reg = 0x60;
+
+
+static inline int i8042_read_data(void)
+{
+ return inb(I8042_DATA_REG);
+}
+
+static inline int i8042_read_status(void)
+{
+ return inb(I8042_STATUS_REG);
+}
+
+static inline void i8042_write_data(int val)
+{
+ outb(val, I8042_DATA_REG);
+}
+
+static inline void i8042_write_command(int val)
+{
+ outb(val, I8042_COMMAND_REG);
+}
+
+#if defined(__i386__)
+
+#include <linux/dmi.h>
+
+static struct dmi_system_id __initdata i8042_dmi_table[] = {
+ {
+ .ident = "Compaq Proliant 8500",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
+ DMI_MATCH(DMI_PRODUCT_NAME , "ProLiant"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "8500"),
+ },
+ },
+ {
+ .ident = "Compaq Proliant DL760",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
+ DMI_MATCH(DMI_PRODUCT_NAME , "ProLiant"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "DL760"),
+ },
+ },
+ { }
+};
+#endif
+
+#ifdef CONFIG_ACPI
+#include <linux/acpi.h>
+#include <acpi/acpi_bus.h>
+
+struct i8042_acpi_resources {
+ unsigned int port1;
+ unsigned int port2;
+ unsigned int irq;
+};
+
+static int i8042_acpi_kbd_registered;
+static int i8042_acpi_aux_registered;
+
+static acpi_status i8042_acpi_parse_resource(struct acpi_resource *res, void *data)
+{
+ struct i8042_acpi_resources *i8042_res = data;
+ struct acpi_resource_io *io;
+ struct acpi_resource_irq *irq;
+ struct acpi_resource_ext_irq *ext_irq;
+
+ switch (res->id) {
+ case ACPI_RSTYPE_IO:
+ io = &res->data.io;
+ if (io->range_length) {
+ if (!i8042_res->port1)
+ i8042_res->port1 = io->min_base_address;
+ else
+ i8042_res->port2 = io->min_base_address;
+ }
+ break;
+
+ case ACPI_RSTYPE_IRQ:
+ irq = &res->data.irq;
+ if (irq->number_of_interrupts > 0)
+ i8042_res->irq =
+ acpi_register_gsi(irq->interrupts[0],
+ irq->edge_level,
+ irq->active_high_low);
+ break;
+
+ case ACPI_RSTYPE_EXT_IRQ:
+ ext_irq = &res->data.extended_irq;
+ if (ext_irq->number_of_interrupts > 0)
+ i8042_res->irq =
+ acpi_register_gsi(ext_irq->interrupts[0],
+ ext_irq->edge_level,
+ ext_irq->active_high_low);
+ break;
+ }
+ return AE_OK;
+}
+
+static int i8042_acpi_kbd_add(struct acpi_device *device)
+{
+ struct i8042_acpi_resources kbd_res;
+ acpi_status status;
+
+ memset(&kbd_res, 0, sizeof(kbd_res));
+ status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+ i8042_acpi_parse_resource, &kbd_res);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ printk("i8042: ACPI %s [%s] at I/O 0x%x, 0x%x, irq %d\n",
+ acpi_device_name(device), acpi_device_bid(device),
+ kbd_res.port1, kbd_res.port2, kbd_res.irq);
+
+ i8042_data_reg = kbd_res.port1;
+ i8042_command_reg = kbd_res.port2;
+ i8042_kbd_irq = kbd_res.irq;
+
+ return 0;
+}
+
+static int i8042_acpi_aux_add(struct acpi_device *device)
+{
+ struct i8042_acpi_resources aux_res;
+ acpi_status status;
+
+ memset(&aux_res, 0, sizeof(aux_res));
+ status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+ i8042_acpi_parse_resource, &aux_res);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ printk("i8042: ACPI %s [%s] at irq %d\n",
+ acpi_device_name(device), acpi_device_bid(device), aux_res.irq);
+
+ i8042_aux_irq = aux_res.irq;
+
+ return 0;
+}
+
+static struct acpi_driver i8042_acpi_kbd_driver = {
+ .name = "i8042",
+ .ids = "PNP0303",
+ .ops = {
+ .add = i8042_acpi_kbd_add,
+ },
+};
+
+static struct acpi_driver i8042_acpi_aux_driver = {
+ .name = "i8042",
+ .ids = "PNP0F13",
+ .ops = {
+ .add = i8042_acpi_aux_add,
+ },
+};
+
+static int i8042_acpi_init(void)
+{
+ int result;
+
+ if (i8042_noacpi) {
+ printk("i8042: ACPI detection disabled\n");
+ return 0;
+ }
+
+ result = acpi_bus_register_driver(&i8042_acpi_kbd_driver);
+ if (result < 0)
+ return result;
+
+ if (result == 0) {
+ acpi_bus_unregister_driver(&i8042_acpi_kbd_driver);
+ return -ENODEV;
+ }
+ i8042_acpi_kbd_registered = 1;
+
+ result = acpi_bus_register_driver(&i8042_acpi_aux_driver);
+ if (result >= 0)
+ i8042_acpi_aux_registered = 1;
+ if (result == 0)
+ i8042_noaux = 1;
+
+ return 0;
+}
+
+static void i8042_acpi_exit(void)
+{
+ if (i8042_acpi_kbd_registered)
+ acpi_bus_unregister_driver(&i8042_acpi_kbd_driver);
+
+ if (i8042_acpi_aux_registered)
+ acpi_bus_unregister_driver(&i8042_acpi_aux_driver);
+}
+#endif
+
+static inline int i8042_platform_init(void)
+{
+/*
+ * On ix86 platforms touching the i8042 data register region can do really
+ * bad things. Because of this the region is always reserved on ix86 boxes.
+ *
+ * if (!request_region(I8042_DATA_REG, 16, "i8042"))
+ * return -1;
+ */
+
+#ifdef CONFIG_ACPI
+ if (i8042_acpi_init())
+ return -1;
+#endif
+
+#if defined(__ia64__)
+ i8042_reset = 1;
+#endif
+
+#if defined(__i386__)
+ if (dmi_check_system(i8042_dmi_table))
+ i8042_noloop = 1;
+#endif
+
+ return 0;
+}
+
+static inline void i8042_platform_exit(void)
+{
+#ifdef CONFIG_ACPI
+ i8042_acpi_exit();
+#endif
+}
+
+#endif /* _I8042_X86IA64IO_H */
diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
--- a/drivers/input/serio/i8042.c 2004-09-03 01:54:25 -05:00
+++ b/drivers/input/serio/i8042.c 2004-09-03 01:54:25 -05:00
@@ -57,6 +57,12 @@
module_param_named(noloop, i8042_noloop, bool, 0);
MODULE_PARM_DESC(dumbkbd, "Disable the AUX Loopback command while probing for the AUX port");

+#ifdef CONFIG_ACPI
+static int i8042_noacpi;
+module_param_named(noacpi, i8042_noacpi, bool, 0);
+MODULE_PARM_DESC(noacpi, "Do not use ACPI to detect controller settings");
+#endif
+
__obsolete_setup("i8042_noaux");
__obsolete_setup("i8042_nomux");
__obsolete_setup("i8042_unlock");
diff -Nru a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
--- a/drivers/input/serio/i8042.h 2004-09-03 01:54:25 -05:00
+++ b/drivers/input/serio/i8042.h 2004-09-03 01:54:25 -05:00
@@ -23,6 +23,8 @@
#include "i8042-ppcio.h"
#elif defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
#include "i8042-sparcio.h"
+#elif defined(CONFIG_X86) || defined(CONFIG_IA64)
+#include "i8042-x86ia64io.h"
#else
#include "i8042-io.h"
#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 14:05    [W:0.066 / U:1.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site