lkml.org 
[lkml]   [2004]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: 2.6.9-rc2-mm4
    Date
    <snip>

    Hello,
    I've already posted about problems with audio extraction but it went
    unnoticed. Here's a recount: When I attempt to read an audio cd into wavs
    with cdda2wav, the process starts but after a while the completion meter
    freezes and klogd says "hdc: lost interrupt" and cdda2wav hangs itself.
    Disabling DMA doesn't help as well as the boot option "pci=routeirq" too.
    Older kernels like 2.6.7 do not show such behavior and there audio extraction
    runs fine. Sysinfo attached.

    Regards,
    Boris.

    System Configuration Summary
    ----------------------------

    Date: Wed Sep 29 12:20:40 CEST 2004
    User: boris:

    Hostname: zmei
    Linux zmei 2.6.9-rc2-mm4 #2 SMP Wed Sep 29 11:24:20 CEST 2004 i686 GNU
    /Linux

    Uptime: 12:20:40 up 18 min, 3 users, load average: 0.02, 0.25, 0.29

    sysinfo.sh version: 1.7, 2002/04/05 20:10:44

    ========================================================================

    Basic Hardware:
    ------------------------------------

    cpu:
    --------------------

    processor : 0
    vendor_id : GenuineIntel
    cpu family : 15
    model : 2
    model name : Intel(R) Pentium(R) 4 CPU 2.60GHz
    stepping : 9
    cpu MHz : 2606.515
    cache size : 512 KB
    physical id : 0
    siblings : 2
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 2
    wp : yes
    flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca
    cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xt
    pr
    bogomips : 5144.57

    processor : 1
    vendor_id : GenuineIntel
    cpu family : 15
    model : 2
    model name : Intel(R) Pentium(R) 4 CPU 2.60GHz
    stepping : 9
    cpu MHz : 2606.515
    cache size : 512 KB
    physical id : 0
    siblings : 2
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 2
    wp : yes
    flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca
    cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xt
    pr
    bogomips : 5193.72


    memory:
    --------------------

    MemTotal: 514460 kB
    MemFree: 9544 kB
    Buffers: 113836 kB
    Cached: 85404 kB
    SwapCached: 0 kB
    Active: 215564 kB
    Inactive: 106956 kB
    HighTotal: 0 kB
    HighFree: 0 kB
    LowTotal: 514460 kB
    LowFree: 9544 kB
    SwapTotal: 996020 kB
    SwapFree: 996020 kB
    Dirty: 96 kB
    Writeback: 0 kB
    Mapped: 183348 kB
    Slab: 176348 kB
    Committed_AS: 267216 kB
    PageTables: 2396 kB
    VmallocTotal: 516020 kB
    VmallocUsed: 784 kB
    VmallocChunk: 515200 kB

    PCI:
    --------------------

    0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRA
    M Controller/Host-Hub Interface (rev 03)
    0000:00:01.0 PCI bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE Host
    -to-AGP Bridge (rev 03)
    0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/
    ICH4-M) USB UHCI Controller #1 (rev 02)
    0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/
    ICH4-M) USB UHCI Controller #2 (rev 02)
    0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/
    ICH4-M) USB UHCI Controller #3 (rev 02)
    0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB
    2.0 EHCI Controller (rev 02)
    0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 82)
    0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC Bri
    dge (rev 02)
    0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) Ultr
    aATA-100 IDE Controller (rev 02)
    0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Ra
    deon 9200 SE] (rev 01)
    0000:03:04.0 Multimedia audio controller: Yamaha Corporation YMF-724 (
    rev 05)
    0000:03:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-
    8139/8139C/8139C+ (rev 10)



    Networking:
    ------------------------------------

    ifconfig:
    --------------------

    eth0 Link encap:Ethernet HWaddr 00:0C:6E:AA:A2:81
    inet addr:192.168.45.26 Bcast:192.168.45.255 Mask:255.255.
    255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:783 errors:0 dropped:0 overruns:0 frame:0
    TX packets:837 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:393781 (384.5 KiB) TX bytes:97165 (94.8 KiB)
    Interrupt:17 Base address:0x2f00

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:348 errors:0 dropped:0 overruns:0 frame:0
    TX packets:348 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:27486 (26.8 KiB) TX bytes:27486 (26.8 KiB)


    route:
    --------------------

    Kernel IP routing table
    Destination Gateway Genmask Flags Metric Ref Us
    e Iface
    192.168.45.0 0.0.0.0 255.255.255.0 U 0 0
    0 eth0
    0.0.0.0 192.168.45.1 0.0.0.0 UG 0 0
    0 eth0


    System resources:
    ------------------------------------

    IO:
    --------------------

    0000-001f : dma1
    0020-0021 : pic1
    002e-0030 : winbond_check
    0040-0043 : timer0
    0050-0053 : timer1
    0060-006f : keyboard
    0070-0077 : rtc
    0080-008f : dma page reg
    00a0-00a1 : pic2
    00c0-00df : dma2
    00f0-00ff : fpu
    0170-0177 : ide1
    01f0-01f7 : ide0
    0376-0376 : ide1
    0378-037a : winbond parport
    03c0-03df : vga+
    03f6-03f6 : ide0
    03f8-03ff : serial
    0400-043f : 0000:00:1f.0
    0800-087f : 0000:00:1f.0
    0800-0803 : PM1a_EVT_BLK
    0804-0805 : PM1a_CNT_BLK
    0808-080b : PM_TMR
    0810-0815 : ACPI CPU throttle
    0828-082f : GPE0_BLK
    0cf8-0cff : PCI conf1
    c000-cfff : PCI Bus #01
    c800-c8ff : 0000:01:00.0
    dc00-dcff : 0000:03:0a.0
    dc00-dcff : 8139too
    e400-e41f : 0000:00:1d.0
    e400-e41f : uhci_hcd
    e800-e81f : 0000:00:1d.1
    e800-e81f : uhci_hcd
    ec00-ec1f : 0000:00:1d.2
    ec00-ec1f : uhci_hcd
    fc00-fc0f : 0000:00:1f.1
    fc00-fc07 : ide0
    fc08-fc0f : ide1

    IRQs:
    --------------------

    CPU0 CPU1
    0: 1114499 0 IO-APIC-edge timer
    1: 2733 0 IO-APIC-edge i8042
    8: 4 0 IO-APIC-edge rtc
    9: 0 0 IO-APIC-level acpi
    12: 99 0 IO-APIC-edge i8042
    14: 44763 0 IO-APIC-edge ide0
    15: 44 0 IO-APIC-edge ide1
    16: 0 0 IO-APIC-level uhci_hcd
    17: 1608 0 IO-APIC-level YMFPCI, eth0
    18: 0 0 IO-APIC-level uhci_hcd
    19: 0 0 IO-APIC-level uhci_hcd
    23: 0 0 IO-APIC-level ehci_hcd
    NMI: 0 0
    LOC: 1114405 1114404
    ERR: 0
    MIS: 0

    Devices:
    --------------------

    Character devices:
    1 mem
    4 /dev/vc/0
    4 tty
    4 ttyS
    5 /dev/tty
    5 /dev/console
    5 /dev/ptmx
    6 lp
    7 vcs
    10 misc
    13 input
    14 sound
    116 alsa
    128 ptm
    136 pts
    180 usb
    226 drm

    Block devices:
    3 ide0
    22 ide1

    filesystems:
    --------------------

    nodev sysfs
    nodev rootfs
    nodev bdev
    nodev proc
    nodev sockfs
    nodev usbfs
    nodev futexfs
    nodev tmpfs
    nodev pipefs
    nodev eventpollfs
    nodev devpts
    ext3
    nodev ramfs
    nodev nfs
    nodev nfs4
    nodev nfsd
    nodev mqueue
    nodev vperfctrfs
    nodev rpc_pipefs

    USB devices:
    --------------------


    T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 2.06
    S: Manufacturer=Linux 2.6.9-rc2-mm4 uhci_hcd
    S: Product=Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
    Controller #3
    S: SerialNumber=0000:00:1d.2
    C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

    T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 2.06
    S: Manufacturer=Linux 2.6.9-rc2-mm4 uhci_hcd
    S: Product=Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
    Controller #2
    S: SerialNumber=0000:00:1d.1
    C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

    T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 2.06
    S: Manufacturer=Linux 2.6.9-rc2-mm4 uhci_hcd
    S: Product=Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
    Controller #1
    S: SerialNumber=0000:00:1d.0
    C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

    T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
    B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 2.06
    S: Manufacturer=Linux 2.6.9-rc2-mm4 ehci_hcd
    S: Product=Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Control
    ler
    S: SerialNumber=0000:00:1d.7
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms


    Kernel resources:
    ------------------------------------

    Version: Linux version 2.6.9-rc2-mm4 (boris@zmei) (gcc version 3.3.4 (Debian 1:3.3.4-13)) #2 SMP Wed Sep 29 11:24:20 CEST 2004

    Modules:
    --------------------

    parport_pc 39488 0 - Live 0xe08b5000
    lp 10696 0 - Live 0xe089f000
    parport 40392 2 parport_pc,lp, Live 0xe08c2000
    8250 23296 0 - Live 0xe08ae000
    serial_core 23296 1 8250, Live 0xe08a7000
    rtc 13008 0 - Live 0xe089a000


    Boot Parameters (/proc/cmdline)
    --------------------

    root=/dev/hda1 vga=0 pci=routeirq


    Boot Kernel Messages (dmesg):
    --------------------

    Linux version 2.6.9-rc2-mm4 (boris@zmei) (gcc version 3.3.4 (Debian 1:
    3.3.4-13)) #2 SMP Wed Sep 29 11:24:20 CEST 2004
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000ce000 - 00000000000d60ac (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
    BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
    BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    511MB LOWMEM available.
    found SMP MP-table at 000fbad0
    On node 0 totalpages: 131056
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 126960 pages, LIFO batch:16
    HighMem zone: 0 pages, LIFO batch:1
    DMI 2.3 present.
    ACPI: RSDP (v000 AMI ) @ 0x000fa270
    ACPI: RSDT (v001 AMIINT INTEL845 0x00000010 MSFT 0x00000097) @ 0x1fff0
    000
    ACPI: FADT (v001 AMIINT INTEL845 0x00000011 MSFT 0x00000097) @ 0x1fff0
    030
    ACPI: MADT (v001 AMIINT INTEL845 0x00000009 MSFT 0x00000097) @ 0x1fff0
    0c0
    ACPI: DSDT (v001 INTEL P4I45GL 0x00001000 MSFT 0x0100000d) @ 0x00000
    000
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 15:2 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 15:2 APIC version 20
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Built 1 zonelists
    Initializing CPU#0
    Kernel command line: root=/dev/hda1 vga=0 pci=routeirq
    CPU 0 irqstacks, hard=c04b3000 soft=c04b1000
    PID hash table entries: 2048 (order: 11, 32768 bytes)
    Detected 2606.515 MHz processor.
    Using tsc for high-res timesource
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 514076k/524224k available (2483k kernel code, 9552k reserved,
    1094k data, 176k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode.
    .. Ok.
    Calibrating delay loop... 5144.57 BogoMIPS (lpj=2572288)
    Security Scaffold v1.0.0 initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
    CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 0
    CPU: After all inits, caps: bfebfbf7 00000000 00000000 00000080
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU0: Thermal monitoring enabled
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
    per-CPU timeslice cutoff: 1462.90 usecs.
    task migration cache decay timeout: 2 msecs.
    Booting processor 1/1 eip 3000
    CPU 1 irqstacks, hard=c04b4000 soft=c04b2000
    Initializing CPU#1
    Calibrating delay loop... 5193.72 BogoMIPS (lpj=2596864)
    CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
    CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 0
    CPU: After all inits, caps: bfebfbf7 00000000 00000000 00000080
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU1: Thermal monitoring enabled
    CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
    Total of 2 processors activated (10338.30 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 pin1=2 pin2=-1
    checking TSC synchronization across 2 CPUs: passed.
    Brought up 2 CPUs
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=3
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20040816
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
    ACPI: Power Resource [URP1] (off)
    ACPI: Power Resource [URP2] (off)
    ACPI: Power Resource [FDDP] (off)
    ACPI: Power Resource [LPTP] (off)
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, di
    sabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, di
    sabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, di
    sabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    ** Routing PCI interrupts for all devices because "pci=routeirq"
    ** was specified. If this was required to make a driver work,
    ** please email the output of "lspci" to bjorn.helgaas@hp.com
    ** so I can fix the driver.
    ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
    ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
    ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI interrupt 0000:03:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
    Machine check exception polling timer started.
    Starting balanced_irq
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    Initializing Cryptographic API
    ACPI: Power Button (FF) [PWRF]
    ACPI: Processor [CPU1] (supports C1, 8 throttling states)
    ACPI: Processor [CPU2] (supports C1, 8 throttling states)
    Linux agpgart interface v0.100 (c) Dave Jones
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies
    Inc RV280 [Radeon 9200 SE]
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    8139too Fast Ethernet driver 0.9.27
    ACPI: PCI interrupt 0000:03:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
    eth0: RealTek RTL8139 at 0xe0802f00, 00:0c:6e:aa:a2:81, IRQ 17
    eth0: Identified 8139 chip type 'RTL-8101'
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with ideb
    us=xx
    ICH4: IDE controller at PCI slot 0000:00:1f.1
    ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
    ICH4: chipset revision 2
    ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
    Probing IDE interface ide0...
    hda: IC35L120AVV207-0, ATA DISK drive
    Using anticipatory io scheduler
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    Probing IDE interface ide2...
    ide2: Wait for ready failed before probe !
    Probing IDE interface ide3...
    ide3: Wait for ready failed before probe !
    Probing IDE interface ide4...
    ide4: Wait for ready failed before probe !
    Probing IDE interface ide5...
    ide5: Wait for ready failed before probe !
    hda: max request size: 1024KiB
    hda: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63,
    UDMA(100)
    hda: cache flushes supported
    hda: hda1 hda2 hda3
    hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
    ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 E
    HCI Controller
    ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 orde
    red !ppc ports=6
    ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64
    bit addr
    ehci_hcd 0000:00:1d.7: capability 0001 at 68
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: irq 23, pci mem 0xdffffc00
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=
    1024 Reset HALT
    PCI: cache line size of 128 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1
    024 RUN
    ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
    ehci_hcd 0000:00:1d.7: supports USB remote wakeup
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: default language 0x0409
    usb usb1: Product: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI
    Controller
    usb usb1: Manufacturer: Linux 2.6.9-rc2-mm4 ehci_hcd
    usb usb1: SerialNumber: 0000:00:1d.7
    usb usb1: hotplug
    usb usb1: adding 1-0:1.0 (config #1, interface 0)
    usb 1-0:1.0: hotplug
    hub 1-0:1.0: usb_probe_interface
    hub 1-0:1.0: usb_probe_interface - got id
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    hub 1-0:1.0: standalone hub
    hub 1-0:1.0: ganged power switching
    hub 1-0:1.0: individual port over-current protection
    hub 1-0:1.0: Single TT
    hub 1-0:1.0: TT requires at most 8 FS bit times
    hub 1-0:1.0: power on to power good time: 20ms
    hub 1-0:1.0: local power source is good
    hub 1-0:1.0: enabling power on all ports
    USB Universal Host Controller Interface driver v2.2
    ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M
    ) USB UHCI Controller #1
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: irq 16, io base 0xe400
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: detected 2 ports
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: default language 0x0409
    usb usb2: Product: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) US
    B UHCI Controller #1
    usb usb2: Manufacturer: Linux 2.6.9-rc2-mm4 uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.0
    usb usb2: hotplug
    usb usb2: adding 2-0:1.0 (config #1, interface 0)
    usb 2-0:1.0: hotplug
    hub 2-0:1.0: usb_probe_interface
    hub 2-0:1.0: usb_probe_interface - got id
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    hub 2-0:1.0: standalone hub
    hub 2-0:1.0: no power switching (usb 1.0)
    hub 2-0:1.0: individual port over-current protection
    hub 2-0:1.0: power on to power good time: 2ms
    hub 2-0:1.0: local power source is good
    ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M
    ) USB UHCI Controller #2
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: irq 19, io base 0xe800
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: detected 2 ports
    usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: default language 0x0409
    usb usb3: Product: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) US
    B UHCI Controller #2
    usb usb3: Manufacturer: Linux 2.6.9-rc2-mm4 uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.1
    usb usb3: hotplug
    usb usb3: adding 3-0:1.0 (config #1, interface 0)
    usb 3-0:1.0: hotplug
    hub 3-0:1.0: usb_probe_interface
    hub 3-0:1.0: usb_probe_interface - got id
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    hub 3-0:1.0: standalone hub
    hub 3-0:1.0: no power switching (usb 1.0)
    hub 3-0:1.0: individual port over-current protection
    hub 3-0:1.0: power on to power good time: 2ms
    hub 3-0:1.0: local power source is good
    ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M
    ) USB UHCI Controller #3
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: irq 18, io base 0xec00
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: detected 2 ports
    usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: default language 0x0409
    usb usb4: Product: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) US
    B UHCI Controller #3
    usb usb4: Manufacturer: Linux 2.6.9-rc2-mm4 uhci_hcd
    usb usb4: SerialNumber: 0000:00:1d.2
    usb usb4: hotplug
    usb usb4: adding 4-0:1.0 (config #1, interface 0)
    usb 4-0:1.0: hotplug
    hub 4-0:1.0: usb_probe_interface
    hub 4-0:1.0: usb_probe_interface - got id
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    hub 4-0:1.0: standalone hub
    hub 4-0:1.0: no power switching (usb 1.0)
    hub 4-0:1.0: individual port over-current protection
    hub 4-0:1.0: power on to power good time: 2ms
    hub 4-0:1.0: local power source is good
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard on isa0060/serio0
    input: PS/2 Logitech Mouse on isa0060/serio1
    perfctr/x86.c: hyper-threaded P4s detected: restricting access for CPU
    s 1
    Please email the following PERFCTR INIT lines to mikpe@csd.uu.se
    To remove this message, rebuild the driver with CONFIG_PERFCTR_INIT_TE
    STS=n
    PERFCTR INIT: vendor 0, family 15, model 2, stepping 9, clock 2606515
    kHz
    PERFCTR INIT: NITER == 64
    PERFCTR INIT: loop overhead is 604 cycles
    PERFCTR INIT: rdtsc cost is 77.0 cycles (5536 total)
    PERFCTR INIT: rdpmc cost is 145.4 cycles (9912 total)
    PERFCTR INIT: rdmsr (counter) cost is 254.2 cycles (16876 total)
    PERFCTR INIT: rdmsr (escr) cost is 528.6 cycles (34440 total)
    PERFCTR INIT: wrmsr (counter) cost is 812.2 cycles (52588 total)
    PERFCTR INIT: wrmsr (escr) cost is 899.9 cycles (58200 total)
    PERFCTR INIT: read cr4 cost is 4.2 cycles (876 total)
    PERFCTR INIT: write cr4 cost is 253.5 cycles (16828 total)
    PERFCTR INIT: rdpmc (fast) cost is 59.3 cycles (4404 total)
    PERFCTR INIT: rdmsr (cccr) cost is 166.1 cycles (11240 total)
    PERFCTR INIT: wrmsr (cccr) cost is 848.0 cycles (54880 total)
    PERFCTR INIT: write LVTPC cost is 35.7 cycles (2892 total)
    PERFCTR INIT: sync_core cost is 263.5 cycles (17472 total)
    perfctr: driver 2.7.5, cpu type Intel P4 at 2606515 kHz
    Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:
    17:53 2004 UTC).
    ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 17 (level, low) -> IRQ 17
    ALSA device list:
    #0: Yamaha DS-XG (YMF724) at 0xdfef8000, irq 17
    NET: Registered protocol family 2
    IP: routing cache hash table of 2048 buckets, 32Kbytes
    TCP: Hash tables configured (established 8192 bind 16384)
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    PM: Reading pmdisk image.
    PM: Resume from disk failed.
    ACPI: (supports S0 S1 S4 S4bios S5)
    ACPI wakeup devices:
    USB1 USB2 USB3 EHCI ICHB PS2M PS2K UAR1 MC9
    EXT3-fs: INFO: recovery required on readonly filesystem.
    EXT3-fs: write access will be enabled during recovery.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 176k freed
    uhci_hcd 0000:00:1d.0: suspend_hc
    uhci_hcd 0000:00:1d.1: suspend_hc
    uhci_hcd 0000:00:1d.2: suspend_hc
    Adding 996020k swap on /dev/hda3. Priority:-1 extents:1
    EXT3 FS on hda1, internal journal
    Real Time Clock Driver v1.12
    hw_random: RNG not detected
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    nfs warning: mount version older than kernel
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disab
    led
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A


    Configuration:
    --------------------

    #
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.9-rc2-mm4
    # Wed Sep 29 11:13:45 2004
    #
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_UID16=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y

    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_CLEAN_COMPILE=y

    #
    # General setup
    #
    CONFIG_LOCALVERSION=""
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_POSIX_MQUEUE=y
    # CONFIG_BSD_PROCESS_ACCT is not set
    CONFIG_SYSCTL=y
    # CONFIG_AUDIT is not set
    CONFIG_LOG_BUF_SHIFT=15
    CONFIG_HOTPLUG=y
    CONFIG_KOBJECT_UEVENT=y
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    # CONFIG_EMBEDDED is not set
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_ALL is not set
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    # CONFIG_CPUSETS is not set
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
    CONFIG_SHMEM=y
    # CONFIG_TINY_SHMEM is not set

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    CONFIG_OBSOLETE_MODPARM=y
    CONFIG_MODVERSIONS=y
    CONFIG_KMOD=y
    CONFIG_STOP_MACHINE=y

    #
    # Processor type and features
    #
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    # CONFIG_M686 is not set
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUMM is not set
    CONFIG_MPENTIUM4=y
    # CONFIG_MK6 is not set
    # CONFIG_MK7 is not set
    # CONFIG_MK8 is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    # CONFIG_X86_GENERIC is not set
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_L1_CACHE_SHIFT=7
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_HPET_TIMER=y
    CONFIG_SMP=y
    CONFIG_NR_CPUS=2
    CONFIG_SCHED_SMT=y
    CONFIG_PREEMPT=y
    CONFIG_PREEMPT_BKL=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_TSC=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_NONFATAL=y
    CONFIG_X86_MCE_P4THERMAL=y
    # CONFIG_TOSHIBA is not set
    # CONFIG_I8K is not set
    # CONFIG_MICROCODE is not set
    # CONFIG_X86_MSR is not set
    # CONFIG_X86_CPUID is not set

    #
    # Firmware Drivers
    #
    # CONFIG_EDD is not set
    CONFIG_NOHIGHMEM=y
    # CONFIG_HIGHMEM4G is not set
    # CONFIG_HIGHMEM64G is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    # CONFIG_EFI is not set
    CONFIG_IRQBALANCE=y
    CONFIG_HAVE_DEC_LOCK=y
    CONFIG_REGPARM=y

    #
    # Performance-monitoring counters support
    #
    CONFIG_PERFCTR=y
    CONFIG_PERFCTR_INIT_TESTS=y
    CONFIG_PERFCTR_VIRTUAL=y
    CONFIG_PERFCTR_INTERRUPT_SUPPORT=y
    CONFIG_PERFCTR_CPUS_FORBIDDEN_MASK=y
    # CONFIG_KEXEC is not set

    #
    # Power management options (ACPI, APM)
    #
    CONFIG_PM=y
    CONFIG_PM_DEBUG=y
    CONFIG_SOFTWARE_SUSPEND=y
    CONFIG_PM_STD_PARTITION=""

    #
    # ACPI (Advanced Configuration and Power Interface) Support
    #
    CONFIG_ACPI=y
    CONFIG_ACPI_BOOT=y
    CONFIG_ACPI_INTERPRETER=y
    CONFIG_ACPI_SLEEP=y
    CONFIG_ACPI_SLEEP_PROC_FS=y
    CONFIG_ACPI_AC=m
    # CONFIG_ACPI_BATTERY is not set
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_FAN=y
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_THERMAL=y
    # CONFIG_ACPI_ASUS is not set
    # CONFIG_ACPI_THINKPAD is not set
    # CONFIG_ACPI_TOSHIBA is not set
    CONFIG_ACPI_BLACKLIST_YEAR=0
    CONFIG_ACPI_DEBUG=y
    CONFIG_ACPI_BUS=y
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_PCI=y
    CONFIG_ACPI_SYSTEM=y
    # CONFIG_X86_PM_TIMER is not set

    #
    # APM (Advanced Power Management) BIOS Support
    #
    # CONFIG_APM is not set

    #
    # CPU Frequency scaling
    #
    # CONFIG_CPU_FREQ is not set

    #
    # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    #
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GOMMCONFIG is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    # CONFIG_PCI_MSI is not set
    # CONFIG_PCI_LEGACY_PROC is not set
    CONFIG_PCI_NAMES=y
    CONFIG_ISA=y
    # CONFIG_EISA is not set
    # CONFIG_MCA is not set
    # CONFIG_SCx200 is not set
    # CONFIG_HOTPLUG_CPU is not set

    #
    # PCMCIA/CardBus support
    #
    # CONFIG_PCMCIA is not set
    CONFIG_PCMCIA_PROBE=y

    #
    # PCI Hotplug Support
    #
    # CONFIG_HOTPLUG_PCI is not set

    #
    # Executable file formats
    #
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_AOUT=m
    CONFIG_BINFMT_MISC=m

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=m
    # CONFIG_DEBUG_DRIVER is not set

    #
    # Memory Technology Devices (MTD)
    #
    # CONFIG_MTD is not set

    #
    # Parallel port support
    #
    CONFIG_PARPORT=m
    CONFIG_PARPORT_PC=m
    CONFIG_PARPORT_PC_CML1=m
    CONFIG_PARPORT_SERIAL=m
    CONFIG_PARPORT_PC_FIFO=y
    CONFIG_PARPORT_PC_SUPERIO=y
    # CONFIG_PARPORT_OTHER is not set
    CONFIG_PARPORT_1284=y

    #
    # Plug and Play support
    #
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set

    #
    # Protocols
    #
    # CONFIG_ISAPNP is not set
    # CONFIG_PNPBIOS is not set

    #
    # Block devices
    #
    # CONFIG_BLK_DEV_FD is not set
    # CONFIG_BLK_DEV_XD is not set
    # CONFIG_PARIDE is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    CONFIG_BLK_DEV_LOOP=m
    CONFIG_BLK_DEV_CRYPTOLOOP=m
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_SX8 is not set
    # CONFIG_BLK_DEV_UB is not set
    CONFIG_BLK_DEV_RAM=m
    CONFIG_BLK_DEV_RAM_SIZE=4096
    CONFIG_INITRAMFS_SOURCE=""
    # CONFIG_LBD is not set
    CONFIG_CDROM_PKTCDVD=m
    CONFIG_CDROM_PKTCDVD_BUFFERS=8
    # CONFIG_CDROM_PKTCDVD_WCACHE is not set

    #
    # ATA/ATAPI/MFM/RLL support
    #
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y

    #
    # Please see Documentation/ide.txt for help/info on IDE drives
    #
    # CONFIG_BLK_DEV_IDE_SATA is not set
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    CONFIG_IDEDISK_MULTI_MODE=y
    CONFIG_BLK_DEV_IDECD=y
    # CONFIG_BLK_DEV_IDETAPE is not set
    # CONFIG_BLK_DEV_IDEFLOPPY is not set
    # CONFIG_BLK_DEV_IDESCSI is not set
    # CONFIG_IDE_TASK_IOCTL is not set
    CONFIG_IDE_TASKFILE_IO=y

    #
    # IDE chipset support/bugfixes
    #
    CONFIG_IDE_GENERIC=y
    # CONFIG_BLK_DEV_CMD640 is not set
    # CONFIG_BLK_DEV_IDEPNP is not set
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    CONFIG_BLK_DEV_GENERIC=y
    # CONFIG_BLK_DEV_OPTI621 is not set
    # CONFIG_BLK_DEV_RZ1000 is not set
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    CONFIG_IDEDMA_PCI_AUTO=y
    # CONFIG_IDEDMA_ONLYDISK is not set
    # CONFIG_BLK_DEV_AEC62XX is not set
    # CONFIG_BLK_DEV_ALI15X3 is not set
    # CONFIG_BLK_DEV_AMD74XX is not set
    # CONFIG_BLK_DEV_ATIIXP is not set
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    # CONFIG_BLK_DEV_CY82C693 is not set
    # CONFIG_BLK_DEV_CS5520 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    # CONFIG_BLK_DEV_HPT34X is not set
    # CONFIG_BLK_DEV_HPT366 is not set
    # CONFIG_BLK_DEV_SC1200 is not set
    CONFIG_BLK_DEV_PIIX=y
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    # CONFIG_BLK_DEV_PDC202XX_NEW is not set
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    # CONFIG_BLK_DEV_SIS5513 is not set
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    # CONFIG_BLK_DEV_VIA82CXXX is not set
    # CONFIG_IDE_ARM is not set
    # CONFIG_IDE_CHIPSETS is not set
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_IVB is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_BLK_DEV_HD is not set

    #
    # SCSI device support
    #
    CONFIG_SCSI=m
    # CONFIG_SCSI_PROC_FS is not set

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    # CONFIG_BLK_DEV_SD is not set
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    # CONFIG_BLK_DEV_SR is not set
    # CONFIG_CHR_DEV_SG is not set

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    # CONFIG_SCSI_MULTI_LUN is not set
    # CONFIG_SCSI_CONSTANTS is not set
    # CONFIG_SCSI_LOGGING is not set

    #
    # SCSI Transport Attributes
    #
    # CONFIG_SCSI_SPI_ATTRS is not set
    # CONFIG_SCSI_FC_ATTRS is not set

    #
    # SCSI low-level drivers
    #
    # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    # CONFIG_SCSI_3W_9XXX is not set
    # CONFIG_SCSI_7000FASST is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AHA152X is not set
    # CONFIG_SCSI_AHA1542 is not set
    # CONFIG_SCSI_AACRAID is not set
    # CONFIG_SCSI_AIC7XXX is not set
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    # CONFIG_SCSI_AIC79XX is not set
    # CONFIG_SCSI_DPT_I2O is not set
    # CONFIG_SCSI_IN2000 is not set
    # CONFIG_MEGARAID_NEWGEN is not set
    # CONFIG_MEGARAID_LEGACY is not set
    # CONFIG_SCSI_SATA is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_DMX3191D is not set
    # CONFIG_SCSI_DTC3280 is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_EATA_PIO is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_GENERIC_NCR5380 is not set
    # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
    # CONFIG_SCSI_IPS is not set
    # CONFIG_SCSI_INIA100 is not set
    # CONFIG_SCSI_PPA is not set
    # CONFIG_SCSI_IMM is not set
    # CONFIG_SCSI_NCR53C406A is not set
    # CONFIG_SCSI_SYM53C8XX_2 is not set
    # CONFIG_SCSI_IPR is not set
    # CONFIG_SCSI_PAS16 is not set
    # CONFIG_SCSI_PSI240I is not set
    # CONFIG_SCSI_QLOGIC_FAS is not set
    # CONFIG_SCSI_QLOGIC_ISP is not set
    # CONFIG_SCSI_QLOGIC_FC is not set
    # CONFIG_SCSI_QLOGIC_1280 is not set
    CONFIG_SCSI_QLA2XXX=m
    # CONFIG_SCSI_QLA21XX is not set
    # CONFIG_SCSI_QLA22XX is not set
    # CONFIG_SCSI_QLA2300 is not set
    # CONFIG_SCSI_QLA2322 is not set
    # CONFIG_SCSI_QLA6312 is not set
    # CONFIG_SCSI_QLA6322 is not set
    # CONFIG_SCSI_SYM53C416 is not set
    # CONFIG_SCSI_DC395x is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_T128 is not set
    # CONFIG_SCSI_U14_34F is not set
    # CONFIG_SCSI_ULTRASTOR is not set
    # CONFIG_SCSI_NSP32 is not set
    # CONFIG_SCSI_DEBUG is not set

    #
    # Old CD-ROM drivers (not SCSI, not IDE)
    #
    # CONFIG_CD_NO_IDESCSI is not set

    #
    # Multi-device support (RAID and LVM)
    #
    # CONFIG_MD is not set

    #
    # Fusion MPT device support
    #
    # CONFIG_FUSION is not set

    #
    # IEEE 1394 (FireWire) support
    #
    # CONFIG_IEEE1394 is not set

    #
    # I2O device support
    #
    # CONFIG_I2O is not set

    #
    # Networking support
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    CONFIG_PACKET=y
    CONFIG_PACKET_MMAP=y
    # CONFIG_NETLINK_DEV is not set
    CONFIG_UNIX=y
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    # CONFIG_IP_MULTICAST is not set
    # CONFIG_IP_ADVANCED_ROUTER is not set
    # CONFIG_IP_PNP is not set
    CONFIG_NET_IPIP=m
    CONFIG_NET_IPGRE=m
    # CONFIG_ARPD is not set
    CONFIG_SYN_COOKIES=y
    # CONFIG_INET_AH is not set
    # CONFIG_INET_ESP is not set
    # CONFIG_INET_IPCOMP is not set
    CONFIG_INET_TUNNEL=m

    #
    # IP: Virtual Server Configuration
    #
    # CONFIG_IP_VS is not set
    # CONFIG_IPV6 is not set
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set

    #
    # IP: Netfilter Configuration
    #
    CONFIG_IP_NF_CONNTRACK=m
    CONFIG_IP_NF_CT_ACCT=y
    CONFIG_IP_NF_CT_PROTO_SCTP=m
    CONFIG_IP_NF_FTP=m
    CONFIG_IP_NF_IRC=m
    CONFIG_IP_NF_TFTP=m
    CONFIG_IP_NF_AMANDA=m
    CONFIG_IP_NF_QUEUE=m
    CONFIG_IP_NF_IPTABLES=m
    CONFIG_IP_NF_MATCH_LIMIT=m
    CONFIG_IP_NF_MATCH_IPRANGE=m
    CONFIG_IP_NF_MATCH_MAC=m
    CONFIG_IP_NF_MATCH_PKTTYPE=m
    CONFIG_IP_NF_MATCH_MARK=m
    CONFIG_IP_NF_MATCH_MULTIPORT=m
    CONFIG_IP_NF_MATCH_TOS=m
    CONFIG_IP_NF_MATCH_RECENT=m
    CONFIG_IP_NF_MATCH_ECN=m
    CONFIG_IP_NF_MATCH_DSCP=m
    CONFIG_IP_NF_MATCH_AH_ESP=m
    CONFIG_IP_NF_MATCH_LENGTH=m
    CONFIG_IP_NF_MATCH_TTL=m
    CONFIG_IP_NF_MATCH_TCPMSS=m
    CONFIG_IP_NF_MATCH_HELPER=m
    CONFIG_IP_NF_MATCH_STATE=m
    CONFIG_IP_NF_MATCH_CONNTRACK=m
    CONFIG_IP_NF_MATCH_OWNER=m
    CONFIG_IP_NF_MATCH_ADDRTYPE=m
    CONFIG_IP_NF_MATCH_REALM=m
    CONFIG_IP_NF_MATCH_SCTP=m
    CONFIG_IP_NF_MATCH_COMMENT=m
    CONFIG_IP_NF_FILTER=m
    CONFIG_IP_NF_TARGET_REJECT=m
    CONFIG_IP_NF_TARGET_LOG=m
    CONFIG_IP_NF_TARGET_ULOG=m
    CONFIG_IP_NF_TARGET_TCPMSS=m
    CONFIG_IP_NF_NAT=m
    CONFIG_IP_NF_NAT_NEEDED=y
    CONFIG_IP_NF_TARGET_MASQUERADE=m
    CONFIG_IP_NF_TARGET_REDIRECT=m
    CONFIG_IP_NF_TARGET_NETMAP=m
    CONFIG_IP_NF_TARGET_SAME=m
    # CONFIG_IP_NF_NAT_LOCAL is not set
    CONFIG_IP_NF_NAT_SNMP_BASIC=m
    CONFIG_IP_NF_NAT_IRC=m
    CONFIG_IP_NF_NAT_FTP=m
    CONFIG_IP_NF_NAT_TFTP=m
    CONFIG_IP_NF_NAT_AMANDA=m
    CONFIG_IP_NF_MANGLE=m
    CONFIG_IP_NF_TARGET_TOS=m
    CONFIG_IP_NF_TARGET_ECN=m
    CONFIG_IP_NF_TARGET_DSCP=m
    CONFIG_IP_NF_TARGET_MARK=m
    CONFIG_IP_NF_TARGET_CLASSIFY=m
    CONFIG_IP_NF_RAW=m
    CONFIG_IP_NF_TARGET_NOTRACK=m
    CONFIG_IP_NF_ARPTABLES=m
    CONFIG_IP_NF_ARPFILTER=m
    CONFIG_IP_NF_ARP_MANGLE=m
    # CONFIG_IP_NF_COMPAT_IPCHAINS is not set
    # CONFIG_IP_NF_COMPAT_IPFWADM is not set
    CONFIG_XFRM=y
    # CONFIG_XFRM_USER is not set

    #
    # SCTP Configuration (EXPERIMENTAL)
    #
    # CONFIG_IP_SCTP is not set
    # CONFIG_ATM is not set
    # CONFIG_BRIDGE is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_DECNET is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_NET_DIVERT is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    # CONFIG_NET_HW_FLOWCONTROL is not set

    #
    # QoS and/or fair queueing
    #
    # CONFIG_NET_SCHED is not set
    CONFIG_NET_CLS_ROUTE=y

    #
    # Network testing
    #
    # CONFIG_NET_PKTGEN is not set
    # CONFIG_KGDBOE is not set
    # CONFIG_NETPOLL is not set
    # CONFIG_NETPOLL_RX is not set
    # CONFIG_NETPOLL_TRAP is not set
    # CONFIG_NET_POLL_CONTROLLER is not set
    # CONFIG_HAMRADIO is not set
    # CONFIG_IRDA is not set
    # CONFIG_BT is not set
    CONFIG_NETDEVICES=y
    # CONFIG_DUMMY is not set
    # CONFIG_BONDING is not set
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # CONFIG_NET_SB1000 is not set

    #
    # ARCnet devices
    #
    # CONFIG_ARCNET is not set

    #
    # Ethernet (10 or 100Mbit)
    #
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=y
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    # CONFIG_NET_VENDOR_3COM is not set
    # CONFIG_LANCE is not set
    # CONFIG_NET_VENDOR_SMC is not set
    # CONFIG_NET_VENDOR_RACAL is not set

    #
    # Tulip family network device support
    #
    # CONFIG_NET_TULIP is not set
    # CONFIG_AT1700 is not set
    # CONFIG_DEPCA is not set
    # CONFIG_HP100 is not set
    # CONFIG_NET_ISA is not set
    CONFIG_NET_PCI=y
    # CONFIG_PCNET32 is not set
    # CONFIG_AMD8111_ETH is not set
    # CONFIG_ADAPTEC_STARFIRE is not set
    # CONFIG_AC3200 is not set
    # CONFIG_APRICOT is not set
    # CONFIG_B44 is not set
    # CONFIG_FORCEDETH is not set
    # CONFIG_CS89x0 is not set
    # CONFIG_DGRS is not set
    # CONFIG_EEPRO100 is not set
    # CONFIG_E100 is not set
    # CONFIG_FEALNX is not set
    # CONFIG_NATSEMI is not set
    # CONFIG_NE2K_PCI is not set
    # CONFIG_8139CP is not set
    CONFIG_8139TOO=y
    # CONFIG_8139TOO_PIO is not set
    # CONFIG_8139TOO_TUNE_TWISTER is not set
    # CONFIG_8139TOO_8129 is not set
    # CONFIG_8139_OLD_RX_RESET is not set
    # CONFIG_SIS900 is not set
    # CONFIG_EPIC100 is not set
    # CONFIG_SUNDANCE is not set
    # CONFIG_TLAN is not set
    # CONFIG_VIA_RHINE is not set
    # CONFIG_NET_POCKET is not set

    #
    # Ethernet (1000 Mbit)
    #
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SK98LIN is not set
    # CONFIG_VIA_VELOCITY is not set
    # CONFIG_TIGON3 is not set

    #
    # Ethernet (10000 Mbit)
    #
    # CONFIG_IXGB is not set
    # CONFIG_S2IO is not set

    #
    # Token Ring devices
    #
    # CONFIG_TR is not set

    #
    # Wireless LAN (non-hamradio)
    #
    # CONFIG_NET_RADIO is not set

    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PLIP is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    # CONFIG_NET_FC is not set
    # CONFIG_SHAPER is not set
    # CONFIG_NETCONSOLE is not set

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN is not set

    #
    # Telephony Support
    #
    # CONFIG_PHONE is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    # CONFIG_INPUT_TSDEV is not set
    # CONFIG_INPUT_EVDEV is not set
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input I/O drivers
    #
    # CONFIG_GAMEPORT is not set
    CONFIG_SOUND_GAMEPORT=y
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    # CONFIG_SERIO_SERPORT is not set
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PARKBD is not set
    # CONFIG_SERIO_PCIPS2 is not set
    CONFIG_SERIO_LIBPS2=y
    # CONFIG_SERIO_RAW is not set

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    CONFIG_MOUSE_SERIAL=m
    # CONFIG_MOUSE_INPORT is not set
    # CONFIG_MOUSE_LOGIBM is not set
    # CONFIG_MOUSE_PC110PAD is not set
    # CONFIG_MOUSE_VSXXXAA is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    CONFIG_INPUT_MISC=y
    CONFIG_INPUT_PCSPKR=m
    # CONFIG_INPUT_UINPUT is not set

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_SERIAL_NONSTANDARD is not set

    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=m
    # CONFIG_SERIAL_8250_ACPI is not set
    CONFIG_SERIAL_8250_NR_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set

    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=m
    CONFIG_UNIX98_PTYS=y
    # CONFIG_LEGACY_PTYS is not set
    CONFIG_PRINTER=m
    # CONFIG_LP_CONSOLE is not set
    # CONFIG_PPDEV is not set
    # CONFIG_TIPAR is not set

    #
    # IPMI
    #
    # CONFIG_IPMI_HANDLER is not set

    #
    # Watchdog Cards
    #
    # CONFIG_WATCHDOG is not set
    CONFIG_HW_RANDOM=m
    # CONFIG_NVRAM is not set
    CONFIG_RTC=m
    # CONFIG_GEN_RTC is not set
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    # CONFIG_SONYPI is not set

    #
    # Ftape, the floppy tape device driver
    #
    CONFIG_AGP=y
    # CONFIG_AGP_ALI is not set
    CONFIG_AGP_ATI=y
    # CONFIG_AGP_AMD is not set
    # CONFIG_AGP_AMD64 is not set
    # CONFIG_AGP_INTEL is not set
    # CONFIG_AGP_INTEL_MCH is not set
    # CONFIG_AGP_NVIDIA is not set
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_SWORKS is not set
    # CONFIG_AGP_VIA is not set
    # CONFIG_AGP_EFFICEON is not set
    CONFIG_DRM=y
    # CONFIG_DRM_TDFX is not set
    # CONFIG_DRM_R128 is not set
    CONFIG_DRM_RADEON=y
    # CONFIG_DRM_MGA is not set
    # CONFIG_DRM_SIS is not set
    # CONFIG_MWAVE is not set
    # CONFIG_RAW_DRIVER is not set
    # CONFIG_HPET is not set
    # CONFIG_HANGCHECK_TIMER is not set

    #
    # I2C support
    #
    CONFIG_I2C=y
    # CONFIG_I2C_CHARDEV is not set

    #
    # I2C Algorithms
    #
    CONFIG_I2C_ALGOBIT=m
    # CONFIG_I2C_ALGOPCF is not set
    # CONFIG_I2C_ALGOPCA is not set

    #
    # I2C Hardware Bus support
    #
    # CONFIG_I2C_ALI1535 is not set
    # CONFIG_I2C_ALI1563 is not set
    # CONFIG_I2C_ALI15X3 is not set
    # CONFIG_I2C_AMD756 is not set
    # CONFIG_I2C_AMD8111 is not set
    # CONFIG_I2C_I801 is not set
    # CONFIG_I2C_I810 is not set
    # CONFIG_I2C_ISA is not set
    # CONFIG_I2C_NFORCE2 is not set
    # CONFIG_I2C_PARPORT is not set
    # CONFIG_I2C_PARPORT_LIGHT is not set
    # CONFIG_I2C_PIIX4 is not set
    # CONFIG_I2C_PROSAVAGE is not set
    # CONFIG_I2C_SAVAGE4 is not set
    # CONFIG_SCx200_ACB is not set
    # CONFIG_I2C_SIS5595 is not set
    # CONFIG_I2C_SIS630 is not set
    # CONFIG_I2C_SIS96X is not set
    # CONFIG_I2C_STUB is not set
    # CONFIG_I2C_VIA is not set
    # CONFIG_I2C_VIAPRO is not set
    # CONFIG_I2C_VOODOO3 is not set
    # CONFIG_I2C_PCA_ISA is not set

    #
    # Hardware Sensors Chip support
    #
    # CONFIG_I2C_SENSOR is not set
    # CONFIG_SENSORS_ADM1021 is not set
    # CONFIG_SENSORS_ADM1025 is not set
    # CONFIG_SENSORS_ADM1031 is not set
    # CONFIG_SENSORS_ASB100 is not set
    # CONFIG_SENSORS_DS1621 is not set
    # CONFIG_SENSORS_FSCHER is not set
    # CONFIG_SENSORS_GL518SM is not set
    # CONFIG_SENSORS_IT87 is not set
    # CONFIG_SENSORS_LM75 is not set
    # CONFIG_SENSORS_LM77 is not set
    # CONFIG_SENSORS_LM78 is not set
    # CONFIG_SENSORS_LM80 is not set
    # CONFIG_SENSORS_LM83 is not set
    # CONFIG_SENSORS_LM85 is not set
    # CONFIG_SENSORS_LM90 is not set
    # CONFIG_SENSORS_MAX1619 is not set
    # CONFIG_SENSORS_SMSC47M1 is not set
    # CONFIG_SENSORS_VIA686A is not set
    # CONFIG_SENSORS_W83781D is not set
    # CONFIG_SENSORS_W83L785TS is not set
    # CONFIG_SENSORS_W83627HF is not set

    #
    # Other I2C Chip support
    #
    # CONFIG_SENSORS_EEPROM is not set
    # CONFIG_SENSORS_PCF8574 is not set
    # CONFIG_SENSORS_PCF8591 is not set
    # CONFIG_SENSORS_RTC8564 is not set
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    # CONFIG_I2C_DEBUG_CHIP is not set

    #
    # Dallas's 1-wire bus
    #
    # CONFIG_W1 is not set

    #
    # Misc devices
    #
    # CONFIG_IBM_ASM is not set

    #
    # Multimedia devices
    #
    # CONFIG_VIDEO_DEV is not set

    #
    # Digital Video Broadcasting Devices
    #
    # CONFIG_DVB is not set

    #
    # Graphics support
    #
    # CONFIG_FB is not set
    # CONFIG_VIDEO_SELECT is not set

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_MDA_CONSOLE is not set
    CONFIG_DUMMY_CONSOLE=y

    #
    # Sound
    #
    CONFIG_SOUND=y

    #
    # Advanced Linux Sound Architecture
    #
    CONFIG_SND=y
    CONFIG_SND_TIMER=y
    CONFIG_SND_PCM=y
    CONFIG_SND_HWDEP=y
    CONFIG_SND_RAWMIDI=y
    CONFIG_SND_SEQUENCER=y
    # CONFIG_SND_SEQ_DUMMY is not set
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=y
    CONFIG_SND_PCM_OSS=y
    CONFIG_SND_SEQUENCER_OSS=y
    CONFIG_SND_RTCTIMER=m
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set

    #
    # Generic devices
    #
    CONFIG_SND_MPU401_UART=y
    CONFIG_SND_OPL3_LIB=y
    # CONFIG_SND_DUMMY is not set
    # CONFIG_SND_VIRMIDI is not set
    # CONFIG_SND_MTPAV is not set
    # CONFIG_SND_SERIAL_U16550 is not set
    # CONFIG_SND_MPU401 is not set

    #
    # ISA devices
    #
    # CONFIG_SND_AD1848 is not set
    # CONFIG_SND_CS4231 is not set
    # CONFIG_SND_CS4232 is not set
    # CONFIG_SND_CS4236 is not set
    # CONFIG_SND_ES1688 is not set
    # CONFIG_SND_ES18XX is not set
    # CONFIG_SND_GUSCLASSIC is not set
    # CONFIG_SND_GUSEXTREME is not set
    # CONFIG_SND_GUSMAX is not set
    # CONFIG_SND_INTERWAVE is not set
    # CONFIG_SND_INTERWAVE_STB is not set
    # CONFIG_SND_OPTI92X_AD1848 is not set
    # CONFIG_SND_OPTI92X_CS4231 is not set
    # CONFIG_SND_OPTI93X is not set
    # CONFIG_SND_SB8 is not set
    # CONFIG_SND_SB16 is not set
    # CONFIG_SND_SBAWE is not set
    # CONFIG_SND_WAVEFRONT is not set
    # CONFIG_SND_CMI8330 is not set
    # CONFIG_SND_OPL3SA2 is not set
    # CONFIG_SND_SGALAXY is not set
    # CONFIG_SND_SSCAPE is not set

    #
    # PCI devices
    #
    CONFIG_SND_AC97_CODEC=y
    # CONFIG_SND_ALI5451 is not set
    # CONFIG_SND_ATIIXP is not set
    # CONFIG_SND_ATIIXP_MODEM is not set
    # CONFIG_SND_AU8810 is not set
    # CONFIG_SND_AU8820 is not set
    # CONFIG_SND_AU8830 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_BT87X is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS4281 is not set
    # CONFIG_SND_EMU10K1 is not set
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_MIXART is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_HDSP is not set
    # CONFIG_SND_TRIDENT is not set
    CONFIG_SND_YMFPCI=y
    # CONFIG_SND_ALS4000 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    # CONFIG_SND_MAESTRO3 is not set
    # CONFIG_SND_FM801 is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    # CONFIG_SND_INTEL8X0 is not set
    # CONFIG_SND_INTEL8X0M is not set
    # CONFIG_SND_SONICVIBES is not set
    # CONFIG_SND_VIA82XX is not set
    # CONFIG_SND_VX222 is not set

    #
    # USB devices
    #
    # CONFIG_SND_USB_AUDIO is not set
    # CONFIG_SND_USB_USX2Y is not set

    #
    # Open Sound System
    #
    # CONFIG_SOUND_PRIME is not set

    #
    # USB support
    #
    CONFIG_USB=y
    CONFIG_USB_DEBUG=y

    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y
    CONFIG_USB_BANDWIDTH=y
    # CONFIG_USB_DYNAMIC_MINORS is not set
    # CONFIG_USB_SUSPEND is not set
    # CONFIG_USB_OTG is not set

    #
    # USB Host Controller Drivers
    #
    CONFIG_USB_EHCI_HCD=y
    # CONFIG_USB_EHCI_SPLIT_ISO is not set
    CONFIG_USB_EHCI_ROOT_HUB_TT=y
    # CONFIG_USB_OHCI_HCD is not set
    CONFIG_USB_UHCI_HCD=y

    #
    # USB Device Class drivers
    #
    CONFIG_USB_AUDIO=m
    # CONFIG_USB_BLUETOOTH_TTY is not set
    # CONFIG_USB_MIDI is not set
    CONFIG_USB_ACM=m
    CONFIG_USB_PRINTER=m
    CONFIG_USB_STORAGE=m
    CONFIG_USB_STORAGE_DEBUG=y
    # CONFIG_USB_STORAGE_RW_DETECT is not set
    # CONFIG_USB_STORAGE_DATAFAB is not set
    # CONFIG_USB_STORAGE_FREECOM is not set
    # CONFIG_USB_STORAGE_ISD200 is not set
    # CONFIG_USB_STORAGE_DPCM is not set
    # CONFIG_USB_STORAGE_HP8200e is not set
    # CONFIG_USB_STORAGE_SDDR09 is not set
    # CONFIG_USB_STORAGE_SDDR55 is not set
    # CONFIG_USB_STORAGE_JUMPSHOT is not set

    #
    # USB Human Interface Devices (HID)
    #
    CONFIG_USB_HID=m
    # CONFIG_USB_HIDINPUT is not set
    # CONFIG_USB_HIDDEV is not set

    #
    # USB HID Boot Protocol drivers
    #
    # CONFIG_USB_KBD is not set
    # CONFIG_USB_MOUSE is not set
    # CONFIG_USB_AIPTEK is not set
    # CONFIG_USB_WACOM is not set
    # CONFIG_USB_KBTAB is not set
    # CONFIG_USB_POWERMATE is not set
    # CONFIG_USB_MTOUCH is not set
    # CONFIG_USB_EGALAX is not set
    # CONFIG_USB_XPAD is not set
    # CONFIG_USB_ATI_REMOTE is not set

    #
    # USB Imaging devices
    #
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_MICROTEK is not set
    # CONFIG_USB_HPUSBSCSI is not set

    #
    # USB Multimedia devices
    #
    # CONFIG_USB_DABUSB is not set

    #
    # Video4Linux support is needed for USB Multimedia device support
    #

    #
    # USB Network adaptors
    #
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_USBNET is not set

    #
    # USB port drivers
    #
    # CONFIG_USB_USS720 is not set

    #
    # USB Serial Converter support
    #
    # CONFIG_USB_SERIAL is not set

    #
    # USB Miscellaneous drivers
    #
    # CONFIG_USB_EMI62 is not set
    # CONFIG_USB_EMI26 is not set
    # CONFIG_USB_TIGL is not set
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_LEGOTOWER is not set
    # CONFIG_USB_LCD is not set
    # CONFIG_USB_LED is not set
    # CONFIG_USB_CYTHERM is not set
    # CONFIG_USB_PHIDGETSERVO is not set
    # CONFIG_USB_TEST is not set

    #
    # USB Gadget Support
    #
    # CONFIG_USB_GADGET is not set

    #
    # File systems
    #
    CONFIG_EXT2_FS=m
    CONFIG_EXT2_FS_XATTR=y
    CONFIG_EXT2_FS_POSIX_ACL=y
    CONFIG_EXT2_FS_SECURITY=y
    CONFIG_EXT3_FS=y
    CONFIG_EXT3_FS_XATTR=y
    CONFIG_EXT3_FS_POSIX_ACL=y
    CONFIG_EXT3_FS_SECURITY=y
    CONFIG_JBD=y
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=y
    # CONFIG_REISERFS_FS is not set
    # CONFIG_JFS_FS is not set
    CONFIG_FS_POSIX_ACL=y
    # CONFIG_XFS_FS is not set
    # CONFIG_MINIX_FS is not set
    # CONFIG_ROMFS_FS is not set
    # CONFIG_QUOTA is not set
    # CONFIG_AUTOFS_FS is not set
    # CONFIG_AUTOFS4_FS is not set

    #
    # Caches
    #
    # CONFIG_CACHEFS is not set

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=m
    CONFIG_JOLIET=y
    # CONFIG_ZISOFS is not set
    CONFIG_UDF_FS=m
    CONFIG_UDF_NLS=y

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=m
    CONFIG_MSDOS_FS=m
    CONFIG_VFAT_FS=m
    CONFIG_FAT_DEFAULT_CODEPAGE=437
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    CONFIG_NTFS_FS=m
    CONFIG_NTFS_DEBUG=y
    CONFIG_NTFS_RW=y

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_SYSFS=y
    # CONFIG_DEVFS_FS is not set
    # CONFIG_DEVPTS_FS_XATTR is not set
    # CONFIG_TMPFS is not set
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_RAMFS=y

    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set

    #
    # Network File Systems
    #
    CONFIG_NFS_FS=y
    CONFIG_NFS_V3=y
    CONFIG_NFS_V4=y
    # CONFIG_NFS_DIRECTIO is not set
    CONFIG_NFSD=y
    CONFIG_NFSD_V3=y
    CONFIG_NFSD_V4=y
    CONFIG_NFSD_TCP=y
    CONFIG_LOCKD=y
    CONFIG_LOCKD_V4=y
    CONFIG_EXPORTFS=y
    CONFIG_SUNRPC=y
    CONFIG_SUNRPC_GSS=y
    CONFIG_RPCSEC_GSS_KRB5=y
    # CONFIG_RPCSEC_GSS_SPKM3 is not set
    CONFIG_SMB_FS=m
    # CONFIG_SMB_NLS_DEFAULT is not set
    CONFIG_CIFS=m
    # CONFIG_CIFS_STATS is not set
    # CONFIG_CIFS_XATTR is not set
    # CONFIG_CIFS_POSIX is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set

    #
    # Partition Types
    #
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_MSDOS_PARTITION=y

    #
    # Native Language Support
    #
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-15"
    CONFIG_NLS_CODEPAGE_437=m
    CONFIG_NLS_CODEPAGE_737=m
    CONFIG_NLS_CODEPAGE_775=m
    CONFIG_NLS_CODEPAGE_850=m
    CONFIG_NLS_CODEPAGE_852=m
    CONFIG_NLS_CODEPAGE_855=m
    CONFIG_NLS_CODEPAGE_857=m
    CONFIG_NLS_CODEPAGE_860=m
    CONFIG_NLS_CODEPAGE_861=m
    CONFIG_NLS_CODEPAGE_862=m
    CONFIG_NLS_CODEPAGE_863=m
    CONFIG_NLS_CODEPAGE_864=m
    CONFIG_NLS_CODEPAGE_865=m
    CONFIG_NLS_CODEPAGE_866=m
    CONFIG_NLS_CODEPAGE_869=m
    CONFIG_NLS_CODEPAGE_936=m
    CONFIG_NLS_CODEPAGE_950=m
    CONFIG_NLS_CODEPAGE_932=m
    CONFIG_NLS_CODEPAGE_949=m
    CONFIG_NLS_CODEPAGE_874=m
    CONFIG_NLS_ISO8859_8=m
    CONFIG_NLS_CODEPAGE_1250=m
    CONFIG_NLS_CODEPAGE_1251=m
    # CONFIG_NLS_ASCII is not set
    CONFIG_NLS_ISO8859_1=m
    CONFIG_NLS_ISO8859_2=m
    CONFIG_NLS_ISO8859_3=m
    CONFIG_NLS_ISO8859_4=m
    CONFIG_NLS_ISO8859_5=m
    CONFIG_NLS_ISO8859_6=m
    CONFIG_NLS_ISO8859_7=m
    CONFIG_NLS_ISO8859_9=m
    CONFIG_NLS_ISO8859_13=m
    CONFIG_NLS_ISO8859_14=m
    CONFIG_NLS_ISO8859_15=m
    CONFIG_NLS_KOI8_R=m
    CONFIG_NLS_KOI8_U=m
    CONFIG_NLS_UTF8=m

    #
    # Profiling support
    #
    # CONFIG_PROFILING is not set

    #
    # Kernel hacking
    #
    CONFIG_DEBUG_KERNEL=y
    CONFIG_MAGIC_SYSRQ=y
    CONFIG_DEBUG_SLAB=y
    CONFIG_DEBUG_SPINLOCK=y
    CONFIG_DEBUG_SPINLOCK_SLEEP=y
    # CONFIG_DEBUG_INFO is not set
    CONFIG_FRAME_POINTER=y
    CONFIG_EARLY_PRINTK=y
    CONFIG_DEBUG_STACKOVERFLOW=y
    # CONFIG_KPROBES is not set
    CONFIG_DEBUG_STACK_USAGE=y
    CONFIG_DEBUG_PAGEALLOC=y
    CONFIG_4KSTACKS=y
    CONFIG_SCHEDSTATS=y
    CONFIG_LOCKMETER=y
    CONFIG_X86_FIND_SMP_CONFIG=y
    CONFIG_X86_MPPARSE=y
    # CONFIG_KGDB is not set

    #
    # Security options
    #
    # CONFIG_KEYS is not set
    CONFIG_SECURITY=y
    CONFIG_SECURITY_NETWORK=y
    CONFIG_SECURITY_CAPABILITIES=y
    # CONFIG_SECURITY_ROOTPLUG is not set
    # CONFIG_SECURITY_SELINUX is not set

    #
    # Cryptographic options
    #
    CONFIG_CRYPTO=y
    # CONFIG_CRYPTO_HMAC is not set
    CONFIG_CRYPTO_NULL=m
    CONFIG_CRYPTO_MD4=m
    CONFIG_CRYPTO_MD5=y
    CONFIG_CRYPTO_SHA1=m
    CONFIG_CRYPTO_SHA256=m
    CONFIG_CRYPTO_SHA512=m
    CONFIG_CRYPTO_WHIRLPOOL=m
    CONFIG_CRYPTO_DES=y
    CONFIG_CRYPTO_BLOWFISH=m
    CONFIG_CRYPTO_TWOFISH=m
    CONFIG_CRYPTO_SERPENT=m
    CONFIG_CRYPTO_AES_586=m
    CONFIG_CRYPTO_CAST5=m
    CONFIG_CRYPTO_CAST6=m
    CONFIG_CRYPTO_TEA=m
    CONFIG_CRYPTO_ARC4=y
    CONFIG_CRYPTO_KHAZAD=m
    CONFIG_CRYPTO_DEFLATE=m
    CONFIG_CRYPTO_MICHAEL_MIC=m
    CONFIG_CRYPTO_CRC32C=m
    CONFIG_CRYPTO_TEST=m

    #
    # Library routines
    #
    CONFIG_CRC_CCITT=m
    CONFIG_CRC32=y
    CONFIG_LIBCRC32C=m
    CONFIG_ZLIB_INFLATE=m
    CONFIG_ZLIB_DEFLATE=m
    CONFIG_X86_SMP=y
    CONFIG_X86_HT=y
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_X86_TRAMPOLINE=y
    CONFIG_PC=y


    ------------------------------------------------------------------------
    This is an automatically created summary.
    The command is "sysinfo.sh".
    Written by Karsten M. Self <kmself@ix.netcom.com>, (c) 2002.

    This program may be freely distributed and modified, with attribution
    and the following disclaimer.
    This program comes with NO WARRANTY and NO LIABILITY FOR DAMAGES.

    Revision information:
    Author: karsten
    Version: 1.7
    Last revised: 2002/04/05 20:10:44
    \
     
     \ /
      Last update: 2005-03-22 14:06    [W:0.128 / U:32.168 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site