lkml.org 
[lkml]   [2004]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: IEEE1394 not working with VT6307 under kernel 2.6.8-1.521
    From
    Date
    On Thu, 2004-09-23 at 00:39, David J. Schuller wrote:
    > [1]
    > Recognition of external IEEE1394 disk fails with Via VT6307 chip under
    > kernel 2.6.8-1.521
    >
    > [2]
    > Motherboard is Soltek SL-B7C-FGR, which has onboard IEEE1394 with a Via
    > VT6307 chip. Southbridge is Via VT8237. CPU is Socket A Athlon MP 2800+.
    > Kernel is 2.6.8-1.521 under Fedora Core 2. I load the appropriate
    > modules with "modprobe ohci1394". Something like this appears in
    > /var/log/messages:
    >
    > Sep 22 15:14:29 mclib4 kernel: ohci1394: $Rev: 1223 $ Ben Collins
    > <bcollins@debian.org>
    > Sep 22 15:14:29 mclib4 kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI):
    > IRQ=[5] MMIO=[dffff000-dffff7ff] Max Packet=[2048]
    > Sep 22 15:14:34 mclib4 kernel: ohci1394: $Rev: 1223 $ Ben Collins
    > <bcollins@debian.org>
    > Sep 22 15:14:34 mclib4 ieee1394.agent[2403]: ... no drivers for IEEE1394
    > product 0x/0x/0x
    > Sep 22 15:14:34 mclib4 kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI):
    > IRQ=[5] MMIO=[dffff000-dffff7ff] Max Packet=[2048]
    > Sep 22 15:14:35 mclib4 ieee1394.agent[2673]: ... no drivers for IEEE1394
    > product 0x/0x/0x

    You might want to try the latest drivers from www.linux1394.org. 2.6.8.1
    doesn't seem to be working very well firewire wise. I am currently
    running rev 1233 on a plain 2.6.8.1 needed to get my iPod going.

    > I attach an external IEEE1394 hard disk. Nothing else happens. No
    > further lines show up in /var/log/messages. No entries show up in
    > /proc/scsi/scsi.
    >
    > I know the disk and cable are good, I have mounted it on other systems
    > (e.g. ASUS A7N8X-E deluxe). I know the procedure is good because those
    > other systems had the same version of software. I know it's not a mobo
    > hardware problem because the disk can be recognized and mounted
    > successfully with a different kernel (Knoppix 3.6 with kernel 2.4.27).
    > That leaves me with this: the current 2.6.8-1.521 kernel either has no
    > support for the VT6307 chip, or that support is broken.
    >
    > [3]
    > Keywords: IEEE1394 ,FireWire, Via VT6307, 2.6.8-1
    >
    > [4]
    > [root@mclib4 root]# cat /proc/version
    > Linux version 2.6.8-1.521 (bhcompile@tweety.build.redhat.com) (gcc
    > version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Mon Aug 16 09:01:18
    > EDT 2004
    >
    > [7.1]
    > [root@mclib4 root]# sh /usr/src/linux-2.6.5-1.358/scripts/ver_linux
    > If some fields are empty or look unusual you may have an old version.
    > Compare to the current minimal requirements in Documentation/Changes.
    >
    > Linux mclib4 2.6.8-1.521 #1 Mon Aug 16 09:01:18 EDT 2004 i686 athlon
    > i386 GNU/Linux
    >
    > Gnu C 3.3.3
    > Gnu make 3.80
    > binutils 2.15.90.0.3
    > util-linux 2.12
    > mount 2.12
    > module-init-tools 2.4.26
    > e2fsprogs 1.35
    > jfsutils 1.1.4
    > xfsprogs 2.6.13
    > pcmcia-cs 3.2.7
    > quota-tools 3.10.
    > PPP 2.4.2
    > isdn4k-utils 3.3
    > nfs-utils 1.0.6
    > Linux C Library 2.3.3
    > Dynamic linker (ldd) 2.3.3
    > Procps 3.2.0
    > Net-tools 1.60
    > Kbd 1.12
    > Sh-utils 5.2.1
    > Modules Loaded udf snd_mixer_oss snd_via82xx snd_ac97_codec
    > snd_pcm snd_timer snd_page_alloc gameport snd_mpu401_uart snd_rawmidi
    > snd_seq_device snd soundcore ohci1394 ieee1394 parport_pc lp parport
    > autofs4 via_velocity floppy sg dm_mod joydev uhci_hcd ehci_hcd button
    > battery asus_acpi ac md5 ipv6 ext3 jbd sata_via libata sd_mod scsi_mod
    >
    > [7.2]
    > [root@mclib4 proc]# cat cpuinfo
    > processor : 0
    > vendor_id : AuthenticAMD
    > cpu family : 6
    > model : 10
    > model name : AMD Athlon(tm) MP 2800+
    > stepping : 0
    > cpu MHz : 2125.544
    > cache size : 512 KB
    > fdiv_bug : no
    > hlt_bug : no
    > f00f_bug : no
    > coma_bug : no
    > fpu : yes
    > fpu_exception : yes
    > cpuid level : 1
    > wp : yes
    > flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca
    > cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
    > bogomips : 4169.72
    >
    > [7.3]
    > [root@mclib4 root]# cat /proc/modules
    > udf 79429 0 - Live 0x42ba5000
    > snd_mixer_oss 14017 0 - Live 0x42a95000
    > snd_via82xx 24165 0 - Live 0x42ae5000
    > snd_ac97_codec 58821 1 snd_via82xx, Live 0x42b16000
    > snd_pcm 83529 1 snd_via82xx, Live 0x42b00000
    > snd_timer 25413 1 snd_pcm, Live 0x42a73000
    > snd_page_alloc 8393 2 snd_via82xx,snd_pcm, Live 0x42a64000
    > gameport 4033 1 snd_via82xx, Live 0x42a71000
    > snd_mpu401_uart 7361 1 snd_via82xx, Live 0x42a6e000
    > snd_rawmidi 21733 1 snd_mpu401_uart, Live 0x42a88000
    > snd_seq_device 6473 1 snd_rawmidi, Live 0x42a6b000
    > snd 45477 8
    > snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0x42a7b000
    > soundcore 7713 1 snd, Live 0x42a68000
    > ohci1394 31577 0 - Live 0x42a45000
    > ieee1394 285333 1 ohci1394, Live 0x42a9e000
    > parport_pc 21249 1 - Live 0x42a3e000
    > lp 9133 0 - Live 0x428fa000
    > parport 35977 2 parport_pc,lp, Live 0x428a5000
    > autofs4 20677 0 - Live 0x428e0000
    > via_velocity 28129 0 - Live 0x428d2000
    > floppy 54001 0 - Live 0x428e7000
    > sg 28513 0 - Live 0x428ca000
    > dm_mod 47317 0 - Live 0x42873000
    > joydev 7169 0 - Live 0x4284c000
    > uhci_hcd 28505 0 - Live 0x4289b000
    > ehci_hcd 27973 0 - Live 0x42893000
    > button 4825 0 - Live 0x4286a000
    > battery 7117 0 - Live 0x4282c000
    > asus_acpi 9177 0 - Live 0x4286f000
    > ac 3533 0 - Live 0x42838000
    > md5 3905 1 - Live 0x4283b000
    > ipv6 217349 14 - Live 0x4290c000
    > ext3 96937 2 - Live 0x428b1000
    > jbd 66521 1 ext3, Live 0x42881000
    > sata_via 4805 3 - Live 0x4282f000
    > libata 29637 1 sata_via, Live 0x42843000
    > sd_mod 17473 4 - Live 0x42832000
    > scsi_mod 105360 3 sg,libata,sd_mod, Live 0x4284f000
    >
    > [7.4]
    > [root@mclib4 proc]# cat /proc/ioports
    > 0000-001f : dma1
    > 0020-0021 : pic1
    > 0040-005f : timer
    > 0060-006f : keyboard
    > 0070-0077 : rtc
    > 0080-008f : dma page reg
    > 00a0-00a1 : pic2
    > 00c0-00df : dma2
    > 00f0-00ff : fpu
    > 0170-0177 : ide1
    > 02f8-02ff : serial
    > 0376-0376 : ide1
    > 0378-037a : parport0
    > 03c0-03df : vga+
    > 03f8-03ff : serial
    > 0cf8-0cff : PCI conf1
    > a000-afff : PCI Bus #01
    > a800-a8ff : 0000:01:00.0
    > bc00-bc7f : 0000:00:09.0
    > c000-c0ff : 0000:00:0a.0
    > c000-c0ff : via-velocity
    > c400-c41f : 0000:00:10.0
    > c400-c41f : uhci_hcd
    > c800-c81f : 0000:00:10.1
    > c800-c81f : uhci_hcd
    > cc00-cc1f : 0000:00:10.2
    > cc00-cc1f : uhci_hcd
    > d000-d01f : 0000:00:10.3
    > d000-d01f : uhci_hcd
    > d400-d4ff : 0000:00:11.5
    > d400-d4ff : VIA8233
    > d800-d8ff : 0000:00:0f.0
    > d800-d8ff : sata_via
    > dc00-dc0f : 0000:00:0f.0
    > dc00-dc0f : sata_via
    > e000-e003 : 0000:00:0f.0
    > e000-e003 : sata_via
    > e400-e407 : 0000:00:0f.0
    > e400-e407 : sata_via
    > e800-e803 : 0000:00:0f.0
    > e800-e803 : sata_via
    > ec00-ec07 : 0000:00:0f.0
    > ec00-ec07 : sata_via
    > fc00-fc0f : 0000:00:0f.1
    > fc00-fc07 : ide0
    > fc08-fc0f : ide1
    >
    > [root@mclib4 proc]# cat /proc/iomem
    > 00000000-0009fbff : System RAM
    > 0009fc00-0009ffff : reserved
    > 000a0000-000bffff : Video RAM area
    > 000c0000-000c7fff : Video ROM
    > 000f0000-000fffff : System ROM
    > 00100000-3ff3ffff : System RAM
    > 00100000-002f6fff : Kernel code
    > 002f7000-00399bff : Kernel data
    > 3ff40000-3ff4ffff : ACPI Tables
    > 3ff50000-3fffffff : ACPI Non-volatile Storage
    > cfd00000-dfcfffff : PCI Bus #01
    > d4000000-d7ffffff : 0000:01:00.1
    > d8000000-dbffffff : 0000:01:00.0
    > dfe00000-dfefffff : PCI Bus #01
    > dfee0000-dfeeffff : 0000:01:00.1
    > dfef0000-dfefffff : 0000:01:00.0
    > dffff000-dffff7ff : 0000:00:09.0
    > dffff000-dffff7ff : ohci1394
    > dffff800-dffff8ff : 0000:00:0a.0
    > dffff800-dffff8ff : via-velocity
    > dffffc00-dffffcff : 0000:00:10.4
    > dffffc00-dffffcff : ehci_hcd
    > e0000000-e3ffffff : 0000:00:00.0
    > fff80000-ffffffff : reserved
    >
    > [7.5]
    > [root@mclib4 proc]# lspci -vvv
    > 00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400] Chipset Host
    > Bridge
    > Subsystem: VIA Technologies, Inc. VT8378 [KM400] Chipset Host
    > Bridge
    > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    > ParErr- Stepping- SERR- FastB2B-
    > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort+ >SERR- <PERR-
    > Latency: 8
    > Region 0: Memory at e0000000 (32-bit, prefetchable)
    > Capabilities: [80] AGP version 3.5
    > Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64-
    > HTrans- 64bit- FW+ AGP3+ Rate=x8
    > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
    > Rate=<none>
    > Capabilities: [c0] Power Management version 2
    > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    > PME(D0-,D1-,D2-,D3hot-,D3cold-)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00
    > [Normal decode])
    > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    > ParErr- Stepping- SERR+ FastB2B-
    > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Latency: 0
    > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    > I/O behind bridge: 0000a000-0000afff
    > Memory behind bridge: dfe00000-dfefffff
    > Prefetchable memory behind bridge: cfd00000-dfcfffff
    > Expansion ROM at 0000a000 [disabled] [size=4K]
    > BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
    > Capabilities: [80] Power Management version 2
    > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
    > PME(D0-,D1-,D2-,D3hot-,D3cold-)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 00:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
    > Controller (rev 80) (prog-if 10 [OHCI])
    > Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
    > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    > ParErr- Stepping- SERR+ FastB2B-
    > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Latency: 64 (8000ns max), Cache Line Size 08
    > Interrupt: pin A routed to IRQ 5
    > Region 0: Memory at dffff000 (32-bit, non-prefetchable)
    > Region 1: I/O ports at bc00 [size=128]
    > Capabilities: [50] Power Management version 2
    > Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
    > PME(D0-,D1-,D2+,D3hot+,D3cold+)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 00:0a.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3119
    > (rev 11)
    > Subsystem: VIA Technologies, Inc.: Unknown device 0110
    > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    > ParErr- Stepping- SERR+ FastB2B-
    > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Latency: 64 (750ns min, 2000ns max), Cache Line Size 08
    > Interrupt: pin A routed to IRQ 10
    > Region 0: I/O ports at c000
    > Region 1: Memory at dffff800 (32-bit, non-prefetchable)
    > [size=256]
    > Capabilities: [50] Power Management version 2
    > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
    > PME(D0+,D1+,D2+,D3hot+,D3cold+)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID
    > Controller (rev 80)
    > Subsystem: VIA Technologies, Inc. VIA VT6420 SATA RAID
    > Controller
    > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    > ParErr- Stepping- SERR- FastB2B-
    > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Latency: 64
    > Interrupt: pin B routed to IRQ 10
    > Region 0: I/O ports at ec00
    > Region 1: I/O ports at e800 [size=4]
    > Region 2: I/O ports at e400 [size=8]
    > Region 3: I/O ports at e000 [size=4]
    > Region 4: I/O ports at dc00 [size=16]
    > Region 5: I/O ports at d800 [size=256]
    > Capabilities: [c0] Power Management version 2
    > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    > PME(D0-,D1-,D2-,D3hot-,D3cold-)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 00:0f.1 IDE interface: VIA Technologies, Inc.
    > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
    > (prog-if 8a [Master SecP PriP])
    > Subsystem: VIA Technologies, Inc.
    > VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
    > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    > ParErr- Stepping- SERR- FastB2B-
    > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Latency: 32
    > Interrupt: pin A routed to IRQ 5
    > Region 4: I/O ports at fc00 [size=16]
    > Capabilities: [c0] Power Management version 2
    > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    > PME(D0-,D1-,D2-,D3hot-,D3cold-)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    > Controller (rev 81) (prog-if 00 [UHCI])
    > Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    > Controller
    > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    > ParErr- Stepping- SERR- FastB2B-
    > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Latency: 64, Cache Line Size 08
    > Interrupt: pin A routed to IRQ 11
    > Region 4: I/O ports at c400 [size=32]
    > Capabilities: [80] Power Management version 2
    > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
    > PME(D0+,D1+,D2+,D3hot+,D3cold+)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    > Controller (rev 81) (prog-if 00 [UHCI])
    > Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    > Controller
    > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    > ParErr- Stepping- SERR- FastB2B-
    > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Latency: 64, Cache Line Size 08
    > Interrupt: pin A routed to IRQ 11
    > Region 4: I/O ports at c800 [size=32]
    > Capabilities: [80] Power Management version 2
    > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
    > PME(D0+,D1+,D2+,D3hot+,D3cold+)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    > Controller (rev 81) (prog-if 00 [UHCI])
    > Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    > Controller
    > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    > ParErr- Stepping- SERR- FastB2B-
    > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Latency: 64, Cache Line Size 08
    > Interrupt: pin B routed to IRQ 5
    > Region 4: I/O ports at cc00 [size=32]
    > Capabilities: [80] Power Management version 2
    > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
    > PME(D0+,D1+,D2+,D3hot+,D3cold+)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    > Controller (rev 81) (prog-if 00 [UHCI])
    > Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    > Controller
    > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    > ParErr- Stepping- SERR- FastB2B-
    > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Latency: 64, Cache Line Size 08
    > Interrupt: pin B routed to IRQ 5
    > Region 4: I/O ports at d000 [size=32]
    > Capabilities: [80] Power Management version 2
    > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
    > PME(D0+,D1+,D2+,D3hot+,D3cold+)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if
    > 20 [EHCI])
    > Subsystem: VIA Technologies, Inc. USB 2.0
    > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    > ParErr- Stepping- SERR- FastB2B-
    > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Latency: 64, Cache Line Size 10
    > Interrupt: pin C routed to IRQ 10
    > Region 0: Memory at dffffc00 (32-bit, non-prefetchable)
    > Capabilities: [80] Power Management version 2
    > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
    > PME(D0+,D1+,D2+,D3hot+,D3cold+)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800
    > South]
    > Subsystem: VIA Technologies, Inc. VT8237 ISA bridge [K8T800
    > South]
    > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    > ParErr- Stepping+ SERR- FastB2B-
    > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Latency: 0
    > Capabilities: [c0] Power Management version 2
    > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    > PME(D0-,D1-,D2-,D3hot-,D3cold-)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 00:11.5 Multimedia audio controller: VIA Technologies, Inc.
    > VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
    > Subsystem: Avance Logic Inc.: Unknown device 4720
    > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
    > ParErr- Stepping- SERR- FastB2B-
    > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Interrupt: pin C routed to IRQ 10
    > Region 0: I/O ports at d400
    > Capabilities: [c0] Power Management version 2
    > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
    > PME(D0-,D1-,D2-,D3hot-,D3cold-)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon
    > 9200] (rev 01) (prog-if 00 [VGA])
    > Subsystem: Hightech Information System Ltd.: Unknown device 29a1
    > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    > ParErr- Stepping- SERR+ FastB2B-
    > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Latency: 64 (2000ns min), Cache Line Size 08
    > Interrupt: pin A routed to IRQ 11
    > Region 0: Memory at d8000000 (32-bit, prefetchable)
    > [size=dfec0000]
    > Region 1: I/O ports at a800 [size=256]
    > Region 2: Memory at dfef0000 (32-bit, non-prefetchable)
    > [size=64K]
    > Expansion ROM at 00020000 [disabled]
    > Capabilities: [58] AGP version 3.0
    > Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
    > HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
    > Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
    > Rate=<none>
    > Capabilities: [50] Power Management version 2
    > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
    > PME(D0-,D1-,D2-,D3hot-,D3cold-)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > 01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200]
    > (Secondary) (rev 01)
    > Subsystem: Hightech Information System Ltd.: Unknown device 29a0
    > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    > ParErr- Stepping- SERR- FastB2B-
    > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    > <TAbort- <MAbort- >SERR- <PERR-
    > Latency: 64 (2000ns min), Cache Line Size 08
    > Region 0: Memory at d4000000 (32-bit, prefetchable)
    > Region 1: Memory at dfee0000 (32-bit, non-prefetchable)
    > [size=64K]
    > Capabilities: [50] Power Management version 2
    > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
    > PME(D0-,D1-,D2-,D3hot-,D3cold-)
    > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    >
    > [7.6]
    > [root@mclib4 proc]# cat /proc/scsi/scsi
    > Attached devices:
    > Host: scsi0 Channel: 00 Id: 00 Lun: 00
    > Vendor: ATA Model: ST380013AS Rev: 3.18
    > Type: Direct-Access ANSI SCSI revision: 05
    >
    > [7.7]
    > [root@mclib4 proc]# cat devices
    > Character devices:
    > 1 mem
    > 4 /dev/vc/0
    > 4 tty
    > 4 ttyS
    > 5 /dev/tty
    > 5 /dev/console
    > 5 /dev/ptmx
    > 6 lp
    > 7 vcs
    > 10 misc
    > 13 input
    > 14 sound
    > 21 sg
    > 29 fb
    > 36 netlink
    > 116 alsa
    > 128 ptm
    > 136 pts
    > 171 ieee1394
    > 180 usb
    >
    > Block devices:
    > 1 ramdisk
    > 2 fd
    > 8 sd
    > 9 md
    > 22 ide1
    > 65 sd
    > 66 sd
    > 67 sd
    > 68 sd
    > 69 sd
    > 70 sd
    > 71 sd
    > 128 sd
    > 129 sd
    > 130 sd
    > 131 sd
    > 132 sd
    > 133 sd
    > 134 sd
    > 135 sd
    > 253 device-mapper
    > 254 mdp
    >
    >
    > If you don't have access to a system with a VT6307 chip I am willing to
    > run any diagnostics you can provide.
    >
    > Cheers,

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 14:06    [W:0.125 / U:0.356 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site