lkml.org 
[lkml]   [2004]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: 2.6.9-rc2-mm1
    Date
    On Thursday 16 September 2004 11:40, Andrew Morton wrote:
    > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc2/2.6
    >.9-rc2-mm1/

    I get a lot of usb error messages on boot, here the relevant dmesg output.
    I also attached lsusb -v output, which maybe useful, if you need more
    information, let me know!

    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard on isa0060/serio0
    input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
    input: PC Speaker
    NET: Registered protocol family 2
    IP: routing cache hash table of 2048 buckets, 16Kbytes
    TCP: Hash tables configured (established 16384 bind 32768)
    IPv4 over IPv4 tunneling driver
    GRE over IPv4 tunneling driver
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    ACPI: (supports S0 S3 S4 S5)
    ACPI wakeup devices:
    FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 PS2M PS2K
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 136k freed
    Adding 514040k swap on /dev/hda9. Priority:-1 extents:1
    EXT3 FS on hda10, internal journal
    warning: process `update' used the obsolete bdflush system call
    Fix your initscripts?
    ohci1394: $Rev: 1226 $ Ben Collins <bcollins@debian.org>
    ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 17 (level, low) -> IRQ 17
    ohci1394: fw-host0: Unexpected PCI resource length of 1000!
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e2427000-e24277ff]
    Max Packet=[2048]
    snd: Unknown parameter `device_gid'
    ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
    intel8x0_measure_ac97_clock: measured 49665 usecs
    intel8x0: clocking to 48000
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
    ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
    ohci_hcd 0000:00:03.0: irq 20, pci mem 0xe2420000
    ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:03.0: SiS init quirk
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
    ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller
    (#2)
    ohci_hcd 0000:00:03.1: irq 21, pci mem 0xe2421000
    ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:03.1: SiS init quirk
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
    ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller
    (#3)
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc001ee09a]
    ohci_hcd 0000:00:03.2: irq 22, pci mem 0xe2422000
    ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:03.2: SiS init quirk
    usb 2-1: new full speed USB device using address 2
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
    ehci_hcd 0000:00:03.3: irq 23, pci mem 0xe2423000
    ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
    PCI: cache line size of 128 is not supported by device 0000:00:03.3
    ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
    usb 2-1: USB disconnect, address 2
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 6 ports detected
    ohci_hcd 0000:00:03.1: wakeup
    sis900.c: v1.08.07 11/02/2003
    ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
    eth0: Unknown PHY transceiver found at address 0.
    eth0: Realtek RTL8201 PHY transceiver found at address 1.
    eth0: Unknown PHY transceiver found at address 2.
    eth0: Unknown PHY transceiver found at address 3.
    eth0: Unknown PHY transceiver found at address 4.
    eth0: Unknown PHY transceiver found at address 5.
    eth0: Unknown PHY transceiver found at address 6.
    eth0: Unknown PHY transceiver found at address 7.
    eth0: Unknown PHY transceiver found at address 8.
    eth0: Unknown PHY transceiver found at address 9.
    eth0: Unknown PHY transceiver found at address 10.
    eth0: Unknown PHY transceiver found at address 11.
    eth0: Unknown PHY transceiver found at address 12.
    eth0: Unknown PHY transceiver found at address 13.
    eth0: Unknown PHY transceiver found at address 14.
    eth0: Unknown PHY transceiver found at address 15.
    eth0: Unknown PHY transceiver found at address 16.
    eth0: Unknown PHY transceiver found at address 17.
    eth0: Unknown PHY transceiver found at address 18.
    eth0: Unknown PHY transceiver found at address 19.
    eth0: Unknown PHY transceiver found at address 20.
    eth0: Unknown PHY transceiver found at address 21.
    eth0: Unknown PHY transceiver found at address 22.
    eth0: Unknown PHY transceiver found at address 23.
    eth0: Unknown PHY transceiver found at address 24.
    eth0: Unknown PHY transceiver found at address 25.
    usb 2-1: new full speed USB device using address 3
    eth0: Unknown PHY transceiver found at address 26.
    eth0: Unknown PHY transceiver found at address 27.
    eth0: Unknown PHY transceiver found at address 28.
    eth0: Unknown PHY transceiver found at address 29.
    eth0: Unknown PHY transceiver found at address 30.
    eth0: Unknown PHY transceiver found at address 31.
    eth0: Using transceiver found at address 1 as default
    eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 19, 00:10:fa:3f:29:16.
    8139too Fast Ethernet driver 0.9.27
    ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18
    eth1: RealTek RTL8139 at 0xd134a000, 00:50:fc:2d:9a:5c, IRQ 18
    eth1: Identified 8139 chip type 'RTL-8139C'
    usb usb3: string descriptor 0 read error: -113
    usb usb3: string descriptor 0 read error: -113
    usb usb3: string descriptor 0 read error: -113
    usb 2-1: control timeout on ep0in
    usb 2-1: string descriptor 0 read error: -110
    usb 2-1: string descriptor 0 read error: -110
    usb 2-1: string descriptor 0 read error: -110
    usb usb1: string descriptor 0 read error: -113
    usb usb1: string descriptor 0 read error: -113
    usb usb1: string descriptor 0 read error: -113
    eth0: Media Link On 100mbps full-duplex
    eth0: Media Link On 100mbps full-duplex
    usb usb3: string descriptor 0 read error: -113
    usb usb3: string descriptor 0 read error: -113
    usb usb3: string descriptor 0 read error: -113
    usb 2-1: string descriptor 0 read error: -110
    usb 2-1: string descriptor 0 read error: -110
    usb 2-1: string descriptor 0 read error: -110
    usb usb1: string descriptor 0 read error: -113
    usb usb1: string descriptor 0 read error: -113
    usb usb1: string descriptor 0 read error: -113
    usb usb3: string descriptor 0 read error: -113
    usb usb3: string descriptor 0 read error: -113
    usb usb3: string descriptor 0 read error: -113
    usb 2-1: string descriptor 0 read error: -110
    usb 2-1: string descriptor 0 read error: -110
    usb 2-1: string descriptor 0 read error: -110
    usb usb1: string descriptor 0 read error: -113
    usb usb1: string descriptor 0 read error: -113
    usb usb1: string descriptor 0 read error: -113
    usb usb3: string descriptor 0 read error: -113
    usb usb3: string descriptor 0 read error: -113
    usb usb3: string descriptor 0 read error: -113
    usb 2-1: string descriptor 0 read error: -110
    usb 2-1: string descriptor 0 read error: -110
    usb 2-1: string descriptor 0 read error: -110
    usb usb1: string descriptor 0 read error: -113
    usb usb1: string descriptor 0 read error: -113
    usb usb1: string descriptor 0 read error: -113
    usb usb3: string descriptor 0 read error: -113
    usb usb3: string descriptor 0 read error: -113
    usb usb3: string descriptor 0 read error: -113
    usb 2-1: string descriptor 0 read error: -110
    usb 2-1: string descriptor 0 read error: -110
    usb 2-1: string descriptor 0 read error: -110
    usb usb1: string descriptor 0 read error: -113
    usb usb1: string descriptor 0 read error: -113
    usb usb1: string descriptor 0 read error: -113


    lsusb -v:

    Bus 004 Device 001: ID 0000:0000
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 1 Single TT
    bMaxPacketSize0 8
    idVendor 0x0000
    idProduct 0x0000
    bcdDevice 2.06
    iManufacturer 3 Linux 2.6.8.1-ck8 ehci_hcd
    iProduct 2 Silicon Integrated Systems [SiS] USB 2.0
    Controller
    iSerial 1 0000:00:03.3
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0002 bytes 2 twice
    bInterval 12

    Bus 003 Device 001: ID 0000:0000
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x0000
    idProduct 0x0000
    bcdDevice 2.06
    iManufacturer 3 Linux 2.6.8.1-ck8 ohci_hcd
    iProduct 2 Silicon Integrated Systems [SiS] USB 1.0
    Controller(#3)
    iSerial 1 0000:00:03.2
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xc0
    Self Powered
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0002 bytes 2 twice
    bInterval 255

    Bus 002 Device 003: ID 0db0:6982 Micro Star International Medion Flash XL
    V2.7ACard Reader
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x0db0 Micro Star International
    idProduct 0x6982 Medion Flash XL V2.7A Card Reader
    bcdDevice 2.6d
    iManufacturer 1
    iProduct 2
    iSerial 3
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 39
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 4
    bmAttributes 0x80
    MaxPower 100mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 3
    bInterfaceClass 8 Mass Storage
    bInterfaceSubClass 6 SCSI
    bInterfaceProtocol 80 Bulk (Zip)
    iInterface 5
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0040 bytes 64 once
    bInterval 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x02 EP 2 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0040 bytes 64 once
    bInterval 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x83 EP 3 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0008 bytes 8 once
    bInterval 10

    Bus 002 Device 001: ID 0000:0000
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x0000
    idProduct 0x0000
    bcdDevice 2.06
    iManufacturer 3 Linux 2.6.8.1-ck8 ohci_hcd
    iProduct 2 Silicon Integrated Systems [SiS] USB 1.0
    Controller(#2)
    iSerial 1 0000:00:03.1
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xc0
    Self Powered
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0002 bytes 2 twice
    bInterval 255

    Bus 001 Device 001: ID 0000:0000
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x0000
    idProduct 0x0000
    bcdDevice 2.06
    iManufacturer 3 Linux 2.6.8.1-ck8 ohci_hcd
    iProduct 2 Silicon Integrated Systems [SiS] USB 1.0
    Controller
    iSerial 1 0000:00:03.0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xc0
    Self Powered
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0002 bytes 2 twice
    bInterval 255
    [unhandled content-type:application/pgp-signature]
    \
     
     \ /
      Last update: 2005-03-22 14:06    [W:4.203 / U:0.588 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site