[lkml]   [2004]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: TG3 doesn't work in kernel 2.4.27 (David S. Miller)
        Brian> The problem seems to be that autoneg is disabled on the IBM
    Brian> switches. After disabling autoneg on the Sun shelf
    Brian> switches, I see the problem. This patch fixes things by
    Brian> reverting to sw autoneg which defaults to a
    Brian> 1000Mbps/full-duplex link but with no flow control when it
    Brian> fails (IBM should really have autoneg enabled!) - I'd
    Brian> appreciate it if someone could test this against an IBM
    Brian> blade.

    Yes, with this patch works for me on a JS20. There is a pause
    of maybe 20 seconds when the interface is brough up (while hardware
    autoneg times out?) and then the network comes up (and serial-over-lan

    Unfortunately this patch doesn't apply to the latest bk (3.9) tg3 driver.

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 14:06    [W:0.042 / U:0.024 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site