Messages in this thread | | | Subject | GA-7DPXDW-P USB Problem | From | Matt Dainty <> | Date | Wed, 25 Aug 2004 01:05:48 +0100 |
| |
Hi,
I'm trying to get a Mitsumi 6-in-1 card reader to work on a Gigabyte GA-7DPXDW-P 760MPX motherboard. It's an internal device that plugs onto the USB headers on a motherboard in place of the extra 'front' ports.
When the machine boots up, I just get these kernel messages related to the device:
hub.c: new USB device 02:00.0-3, assigned address 3 usb.c: USB device not accepting new address=3 (error=-110) hub.c: new USB device 02:00.0-3, assigned address 4 usb.c: USB device not accepting new address=4 (error=-110)
The device remains unseen to the kernel. I've had it working fine on an Abit KT7 motherboard. I've also tried attaching some USB ports to the header and anything plugged into them also produces the same error above, but plugging them into different USB ports works fine.
When the motherboard USB controller driver is loaded (OHCI), it seems to detect all 4 ports (two on the back, two on this motherboard header):
usb-ohci.c: USB OHCI at membase 0xf88e7000, IRQ 19 usb-ohci.c: usb-02:00.0, Advanced Micro Devices [AMD] AMD-768 [Opus] USB usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 4 ports detected
The two ports on the back work fine, I have a Zaurus cradle and the hub built into my monitor plugged into those, and the devices work. I've tried unplugging them and that makes no difference.
I've found other people with similar issues, (same -110 error code), but with no real solution, IRQ routing seems to be hinted at, but the rear ports, which look to be part of the same device, work okay. The controller also appears to get its own IRQ #19 with nothing else sharing it, and its interrupt count goes up.
I've also tried booting with noapic, no difference, pci=noacpi, that stops my Adaptec SCSI controller from working, SCSI errors start appearing as soon as the buses are scanned for devices and the machine won't boot. I've also tried removing all 'unnecessary' PCI cards, (leaving just the AGP graphics card and PCI SCSI controller) and that makes no difference either.
This is all with the latest FC1 2.4.22-1-2199 (stock apart from me adding the saa7134 v4l2 driver) kernel, although I did try booting the latest FC2 2.6.8-1.521 kernel, but that produced the same -110 error code.
Anyone else got the 'front' USB ports working on this motherboard? I'm fairly sure this motherboard is recent enough to not have the broken MPX chipset, I certainly didn't get a PCI USB card with it.
I've attached full dmesg if that's useful. Anything else I can try?
Cheers
Matt Linux version 2.4.22-1.2199.nptl.bodgitsmp (matt@lister.bodgit-n-scarper.com) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #1 SMP Fri Aug 20 14:27:36 BST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. ACPI: have wakeup address 0xc0002000 found SMP MP-table at 000f4df0 hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000f0000 reserved twice. hm, page 000f1000 reserved twice. On node 0 totalpages: 262128 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32752 pages. ACPI: RSDP (v000 AMD2P ) @ 0x000f6830 ACPI: RSDT (v001 AMD2P AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000 ACPI: FADT (v001 AMD2P AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040 ACPI: MADT (v001 AMD2P AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff6300 ACPI: DSDT (v001 AMD2P AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 Pentium(tm) Pro APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 Pentium(tm) Pro APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3]) Using ACPI (MADT) for SMP configuration information Kernel command line: ro root=/dev/md0 rhgb acpi=on Initializing CPU#0 Detected 2133.430 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4259.84 BogoMIPS Memory: 1031664k/1048512k available (1581k kernel code, 16460k reserved, 1178k data, 168k init, 131008k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU0: AMD Athlon(tm) MP 2800+ stepping 00 per-CPU timeslice cutoff: 1462.85 usecs. task migration cache decay timeout: 10 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4259.84 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU1: AMD Athlon(tm) MP stepping 00 Total of 2 processors activated (8519.68 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC.......................
IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 1 1 0 1 0 1 1 71 0a 003 03 0 0 0 0 0 1 1 79 0b 003 03 0 0 0 0 0 1 1 81 0c 003 03 0 0 0 0 0 1 1 89 0d 003 03 0 0 0 0 0 1 1 91 0e 003 03 0 0 0 0 0 1 1 99 0f 003 03 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2133.4421 MHz. ..... host bus clock speed is 266.6800 MHz. cpu: 0, clocks: 2666800, slice: 888933 CPU0<T0:2666800,T1:1777856,D:11,S:888933,C:2666800> cpu: 1, clocks: 2666800, slice: 888933 CPU1<T0:2666800,T1:888928,D:6,S:888933,C:2666800> Starting migration thread for cpu 0 smp_num_cpus: 2. Starting migration thread for cpu 1 mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs ACPI: Subsystem revision 20031002 PCI: PCI BIOS revision 2.10 entry at 0xfa320, last bus=2 PCI: Using configuration type 1 IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.OP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPP._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) PCI: Probing PCI hardware IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1) 00:00:08[A] -> 2-16 -> IRQ 16 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1) 00:00:08[B] -> 2-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1) 00:00:08[C] -> 2-18 -> IRQ 18 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1) 00:00:08[D] -> 2-19 -> IRQ 19 Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Setting AMD recommended values for PCI bus. It isn't fully PCI standards compliant PCI: Via IRQ fixup for 02:04.0, from 11 to 0 PCI: Via IRQ fixup for 02:04.1, from 12 to 1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) apm: disabled - APM is not SMP safe. Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 Detected PS/2 Mouse Port. pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7441: IDE controller at PCI slot 00:07.1 AMD7441: chipset revision 4 AMD7441: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD_IDE: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio PDC20276: IDE controller at PCI slot 02:08.0 PDC20276: chipset revision 1 PDC20276: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xc800-0xc807, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xc808-0xc80f, BIOS settings: hdg:pio, hdh:pio hda: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive hdc: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-floppy driver. hda: No disk in drive hda: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm ide: late registration of driver. md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 325k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 29160 Ultra160 SCSI adapter> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
blk: queue f7fc6018, I/O limit 4095Mb (mask 0xffffffff) (scsi0:A:5): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) (scsi0:A:6): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) (scsi0:A:8): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Vendor: UMAX Model: Astra 1220S Rev: V1.3 Type: Scanner ANSI SCSI revision: 02 blk: queue f7fa0e18, I/O limit 4095Mb (mask 0xffffffff) Vendor: SEAGATE Model: ST318452LC Rev: 0002 Type: Direct-Access ANSI SCSI revision: 03 blk: queue f7fc7618, I/O limit 4095Mb (mask 0xffffffff) Vendor: SEAGATE Model: ST318452LC Rev: 0002 Type: Direct-Access ANSI SCSI revision: 03 blk: queue f7fc6418, I/O limit 4095Mb (mask 0xffffffff) Vendor: SEAGATE Model: ST336752LC Rev: 0002 Type: Direct-Access ANSI SCSI revision: 03 blk: queue f7fc6a18, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:5:0: Tagged Queuing enabled. Depth 32 scsi0:A:6:0: Tagged Queuing enabled. Depth 32 scsi0:A:8:0: Tagged Queuing enabled. Depth 32 Attached scsi disk sda at scsi0, channel 0, id 5, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0 Attached scsi disk sdc at scsi0, channel 0, id 8, lun 0 SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB) Partition check: sda: sda1 sda2 sda3 sda4 SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB) sdb: sdb1 sdb2 sdb3 sdb4 SCSI device sdc: 71687369 512-byte hdwr sectors (36704 MB) sdc: sdc1 LVM version 1.0.5+(22/07/2002) module loaded md: raid0 personality registered as nr 2 Journalled Block Device driver loaded md: Autodetecting RAID arrays. [events: 0000014d] [events: 00000155] [events: 0000014d] [events: 00000155] md: autorun ... md: considering sdb4 ... md: adding sdb4 ... md: adding sda4 ... md: created md1 md: bind<sda4,1> md: bind<sdb4,2> md: running: <sdb4><sda4> md: sdb4's event counter: 00000155 md: sda4's event counter: 00000155 md1: max total readahead window set to 512k md1: 2 data-disks, max readahead per data-disk: 256k raid0: looking at sda4 raid0: comparing sda4(16554880) with sda4(16554880) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sdb4 raid0: comparing sdb4(16554880) with sda4(16554880) raid0: EQUAL raid0: FINAL 1 zones raid0: zone 0 raid0: checking sda4 ... contained as device 0 (16554880) is smallest!. raid0: checking sdb4 ... contained as device 1 raid0: zone->nb_dev: 2, size: 33109760 raid0: current zone offset: 16554880 raid0: done. raid0 : md_size is 33109760 blocks. raid0 : conf->smallest->size is 33109760 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: updating md1 RAID superblock on device md: sdb4 [events: 00000156]<6>(write) sdb4's sb offset: 16554880 md: sda4 [events: 00000156]<6>(write) sda4's sb offset: 16554880 md: considering sdb3 ... md: adding sdb3 ... md: adding sda3 ... md: created md0 md: bind<sda3,1> md: bind<sdb3,2> md: running: <sdb3><sda3> md: sdb3's event counter: 0000014d md: sda3's event counter: 0000014d md0: max total readahead window set to 512k md0: 2 data-disks, max readahead per data-disk: 256k raid0: looking at sda3 raid0: comparing sda3(505920) with sda3(505920) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sdb3 raid0: comparing sdb3(505920) with sda3(505920) raid0: EQUAL raid0: FINAL 1 zones raid0: zone 0 raid0: checking sda3 ... contained as device 0 (505920) is smallest!. raid0: checking sdb3 ... contained as device 1 raid0: zone->nb_dev: 2, size: 1011840 raid0: current zone offset: 505920 raid0: done. raid0 : md_size is 1011840 blocks. raid0 : conf->smallest->size is 1011840 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: updating md0 RAID superblock on device md: sdb3 [events: 0000014e]<6>(write) sdb3's sb offset: 505920 md: sda3 [events: 0000014e]<6>(write) sda3's sb offset: 505920 md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 168k freed ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 14:47:06 Aug 20 2004 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xa000, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xa400, IRQ 17 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver ehci_hcd 02:04.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 02:04.2: irq 18, pci mem f88de000 usb.c: new USB bus registered, assigned bus number 3 ehci_hcd 02:04.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 4 ports detected usb-ohci.c: USB OHCI at membase 0xf88e7000, IRQ 19 usb-ohci.c: usb-02:00.0, Advanced Micro Devices [AMD] AMD-768 [Opus] USB usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 4 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,0), internal journal loop: loaded (max 8 devices) Adding Swap: 755044k swap-space (priority 1) Adding Swap: 755044k swap-space (priority 1) hub.c: connect-debounce failed, port 1 disabled gameport0: Emu10k1 Gameport at 0xb000 size 8 speed 932 kHz input0: Analog 2-axis 4-button joystick at gameport0.0 [TSC timer, 2132 MHz clock, 1110 ns res] hub.c: new USB device 02:00.0-2, assigned address 2 hub.c: USB hub found hub.c: 4 ports detected kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,0), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. hub.c: new USB device 02:00.0-3, assigned address 3 usb.c: USB device not accepting new address=3 (error=-110) hub.c: new USB device 02:00.0-3, assigned address 4 usb.c: USB device not accepting new address=4 (error=-110) hub.c: new USB device 02:00.0-2.1, assigned address 5 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb4:5.0 hub.c: new USB device 02:00.0-2.3, assigned address 6 usb.c: USB device 6 (vend/prod 0xa12/0x1) is not claimed by any active driver. NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 941M agpgart: Detected AMD 760MP chipset agpgart: AGP aperture is 256M @ 0xd0000000 hub.c: new USB device 02:00.0-2.4, assigned address 7 usb.c: USB device 7 (vend/prod 0x6cd/0x121) is not claimed by any active driver. Linux video capture interface: v1.00 i2c-core.o: i2c core module saa7130/34: v4l2 driver version 0.2.12 loaded saa7134[0]: found at 02:06.0, rev: 1, irq: 18, latency: 32, mmio: 0xf4024000 saa7134[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO3000 [card=2,insmod option] saa7134[0]: board init: gpio is 39000 saa7134[0]: registered input device for IR i2c-core.o: adapter saa7134[0] registered as adapter 0. saa7134[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found at addr 0xc2 i2c-bus saa7134[0] tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles)) by saa7134[0] i2c-core.o: client [Philips PAL_I (FI1246 and compa] registered to adapter [saa7134[0]](pos. 0). saa7134[0]: registered device video0 [v4l2] saa7134[0]: registered device vbi0 saa7134[0]: registered device radio0 hub.c: new USB device 02:04.2-1, assigned address 2 hub.c: USB hub found hub.c: 7 ports detected BlueZ Core ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com> BlueZ HCI USB driver ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com> usb.c: registered new driver hci_usb usbdfu.c: USB Device Firmware Upgrade (DFU) handler v0.11beta4-ac1 usb.c: registered new driver usbdfu usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 usbserial.c: USB Serial support registered for Keyspan - (without firmware) usbserial.c: USB Serial support registered for Keyspan 1 port adapter usbserial.c: Keyspan 1 port adapter converter detected usbserial.c: Keyspan 1 port adapter converter now attached to ttyUSB0 (or usb/tts/0 for devfs) usbserial.c: USB Serial support registered for Keyspan 2 port adapter usbserial.c: USB Serial support registered for Keyspan 4 port adapter keyspan.c: v1.1.4:Keyspan USB to Serial Converter Driver ohci1394: $Rev: 1010 $ Ben Collins <bcollins@debian.org> ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[f4028000-f40287ff] Max Packet=[2048] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0894000000000bee]
| |