lkml.org 
[lkml]   [2004]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 11/14]: kexec: machine_shutdown.i386
From
Date

Factor out the apic and smp shutdown code from machine_restart
so it can be called by in the kexec reboot path as well.

By switching to the bootstrap cpu by default on reboot I can
delete/simplify some motherboard fixups well.

diff -uNr linux-2.6.8.1-mm2-kexec.x86_64/arch/i386/kernel/reboot.c linux-2.6.8.1-mm2-machine_shutdown.i386/arch/i386/kernel/reboot.c
--- linux-2.6.8.1-mm2-kexec.x86_64/arch/i386/kernel/reboot.c Sat Aug 14 11:54:53 2004
+++ linux-2.6.8.1-mm2-machine_shutdown.i386/arch/i386/kernel/reboot.c Fri Aug 20 11:12:18 2004
@@ -23,7 +23,6 @@
int reboot_thru_bios;

#ifdef CONFIG_SMP
-int reboot_smp = 0;
static int reboot_cpu = -1;
/* shamelessly grabbed from lib/vsprintf.c for readability */
#define is_digit(c) ((c) >= '0' && (c) <= '9')
@@ -46,7 +45,6 @@
break;
#ifdef CONFIG_SMP
case 's': /* "smp" reboot by executing reset on BSP or other CPU*/
- reboot_smp = 1;
if (is_digit(*(str+1))) {
reboot_cpu = (int) (*(str+1) - '0');
if (is_digit(*(str+2)))
@@ -85,33 +83,9 @@
return 0;
}

-/*
- * Some machines require the "reboot=s" commandline option, this quirk makes that automatic.
- */
-static int __init set_smp_reboot(struct dmi_system_id *d)
-{
-#ifdef CONFIG_SMP
- if (!reboot_smp) {
- reboot_smp = 1;
- printk(KERN_INFO "%s series board detected. Selecting SMP-method for reboots.\n", d->ident);
- }
-#endif
- return 0;
-}
-
-/*
- * Some machines require the "reboot=b,s" commandline option, this quirk makes that automatic.
- */
-static int __init set_smp_bios_reboot(struct dmi_system_id *d)
-{
- set_smp_reboot(d);
- set_bios_reboot(d);
- return 0;
-}
-
static struct dmi_system_id __initdata reboot_dmi_table[] = {
{ /* Handle problems with rebooting on Dell 1300's */
- .callback = set_smp_bios_reboot,
+ .callback = set_bios_reboot,
.ident = "Dell PowerEdge 1300",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
@@ -295,41 +269,32 @@
: "i" ((void *) (0x1000 - sizeof (real_mode_switch) - 100)));
}

-void machine_restart(char * __unused)
+void machine_shutdown(void)
{
#ifdef CONFIG_SMP
- int cpuid;
-
- cpuid = GET_APIC_ID(apic_read(APIC_ID));
+ int reboot_cpu_id;

- if (reboot_smp) {
+ /* The boot cpu is always logical cpu 0 */
+ reboot_cpu_id = 0;

- /* check to see if reboot_cpu is valid
- if its not, default to the BSP */
- if ((reboot_cpu == -1) ||
- (reboot_cpu > (NR_CPUS -1)) ||
- !physid_isset(cpuid, phys_cpu_present_map))
- reboot_cpu = boot_cpu_physical_apicid;
-
- reboot_smp = 0; /* use this as a flag to only go through this once*/
- /* re-run this function on the other CPUs
- it will fall though this section since we have
- cleared reboot_smp, and do the reboot if it is the
- correct CPU, otherwise it halts. */
- if (reboot_cpu != cpuid)
- smp_call_function((void *)machine_restart , NULL, 1, 0);
+ /* See if there has been given a command line override */
+ if ((reboot_cpu_id != -1) && (reboot_cpu < NR_CPUS) &&
+ cpu_isset(reboot_cpu, cpu_online_map)) {
+ reboot_cpu_id = reboot_cpu;
}
-
- /* if reboot_cpu is still -1, then we want a tradional reboot,
- and if we are not running on the reboot_cpu,, halt */
- if ((reboot_cpu != -1) && (cpuid != reboot_cpu)) {
- for (;;)
- __asm__ __volatile__ ("hlt");
+
+ /* Make certain the cpu I'm rebooting on is online */
+ if (!cpu_isset(reboot_cpu_id, cpu_online_map)) {
+ reboot_cpu_id = smp_processor_id();
}
- /*
- * Stop all CPUs and turn off local APICs and the IO-APIC, so
- * other OSs see a clean IRQ state.
+
+ /* Make certain I only run on the appropriate processor */
+ set_cpus_allowed(current, cpumask_of_cpu(reboot_cpu_id));
+
+ /* O.K. Now that I'm on the appropriate processor, stop
+ * all of the others, and disable their local APICs.
*/
+
smp_send_stop();
#elif defined(CONFIG_X86_LOCAL_APIC)
if (cpu_has_apic) {
@@ -341,6 +306,11 @@
#ifdef CONFIG_X86_IO_APIC
disable_IO_APIC();
#endif
+}
+
+void machine_restart(char * __unused)
+{
+ machine_shutdown();

if (!reboot_thru_bios) {
if (efi_enabled) {
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 14:05    [W:0.023 / U:9.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site