Messages in this thread Patch in this message |  | | Date | Tue, 17 Aug 2004 11:02:48 -0700 | | From | "David S. Miller" <> | | Subject | Re: TG3 doesn't work in kernel 2.4.27 |
| |
On Tue, 17 Aug 2004 21:30:06 +0900 Tetsuo Handa <a5497108@anet.ne.jp> wrote:
> I compiled as a UP kernel but it wasn't the cause. > Also, I patched the above fix on 2.4.27-rc4 and > compiled as a UP kernel, but didn't work.
Just add this patch, it will fix the problem but it is not the nicest fix. I'll work on a better one.
It just disables the new Sun code, and uses the old fiber handling for 5704.
===== drivers/net/tg3.c 1.193 vs edited ===== --- 1.193/drivers/net/tg3.c 2004-08-16 18:01:30 -07:00 +++ edited/drivers/net/tg3.c 2004-08-16 18:46:58 -07:00 @@ -5415,13 +5398,13 @@ * is enabled. */ tw32_f(MAC_LOW_WMARK_MAX_RX_FRAME, 2); - +#if 0 if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 && (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) { /* Use hardware link auto-negotiation */ tp->tg3_flags2 |= TG3_FLG2_HW_AUTONEG; } - +#endif err = tg3_setup_phy(tp, 1); if (err) return err; - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |