Messages in this thread | | | From | Denis Vlasenko <> | Subject | Re: 2.6 series kernels on HP Netserver LH4 - kernel panic on boot | Date | Tue, 6 Jul 2004 09:14:29 +0300 |
| |
On Tuesday 06 July 2004 05:28, Len Brown wrote: > On Mon, 2004-06-28 at 18:51, Andrew Feldhacker wrote: > > 2.6 series kernels on HP Netserver LH4 - kernel panic on boot > > > > > > In attempting to migrate to the 2.6 series Linux kernel on my HP > > Netserver LH4, I've run into a kernel panic on boot. This happens > > nearly immediately upon booting to the kernel, and so quickly that I > > can't make out anything other than the truncated (transcribed) dump > > appended below. > > > > 2.4.x kernels work without a hitch on this system (I was trying to > > move > > from 2.4.26 to 2.6.6 or 2.6.7 -- both of which produce the same > > problem.). I've also searched around a bit online, and found a couple > > other mentions of what seem to be the same problem, however, there > > were > > no replies to go along with them. > > > > The dump below is from a vanilla 2.6.7 kernel: > > > > ----- top of screen ----- > > 00000000 c02db078 c01bb853 f7feddb0 c02db078 00000000 00000001 > > f7ea3400 > > 00000000 00000000 00000000 c01bbaf8 f7feb158 f7ea3400 00000001 > > 00000207 > > Call Trace: > > [<c02056e2>] class_device_add+0x112/0x130 > > [<c0205343>] class_device_create_file+0x23/0x30 > > [<c01bb853>] pci_alloc_child_bus+0x93/0xe0 > > [<c01bbaf8>] pci_scan_bridge+0x208/0x250 > > [<c01bc1da>] pci_scan_child_bus+0xaa/0xb0 > > [<c01bc354>] pci_scan_bus_parented+0x144/0x170 > > [<c0221f3e>] pcibios_scan_root+0x5e/0x70 > > [<c01d9b35>] acpi_pci_root_add+0x16d/0x1cd > > [<c01db6aa>] acpi_bus_driver_init+0x2c/0x8a > > [<c01dba24>] acpi_bus_find_driver+0x83/0xdd > > [<c01dbed6>] acpi_bus_add+0x128/0x155 > > [<c01dc00e>] acpi_bus_scan+0x10b/0x159 > > [<c0359b5f>] acpi_scan_init+0x4e/0x6f > > [<c03449ab>] do_initcalls+0x2b/0xc0 > > [<c0132bb5>] init_workqueues+0x15/0x2c > > [<c0100564>] init+0x104/0x270 > > [<c0100460>] init+0x0/0x270 > > [<c01042c5>] kernel_thread_helper+0x5/0x10 > > > > Code: 0b 47 0c 8d 48 6c f0 ff 48 6c 0f 88 9f 01 00 00 8b 45 00 89 > > <0>Kernel panic: Attempted to kill init! > > > > > > Any help on this would be much appreciated, and I would be more than > > happy to provide any additional information which may be needed. > > any chance of getting a serial console "debug" capture?
If setting up serial console is problematic, simply set vga= boot parameter to largest working resolution, to get the most of the panic.
> would be interesting to try "acpi=off" and "pci=noacpi", > to see if ACPI is involved, but the trace above suggests > that the problem may lie in the common PCI code. -- vda - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |