lkml.org 
[lkml]   [2004]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: 3C905 and ethtool
Date
I tested it on few machines and it works for me on 8139too devices:

# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes

# ethtool eth0
Settings for eth0:

Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Speed: 10Mb/s
Duplex: Half
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: d

But this really doesn't work with 3c59x - probably it was destroyed somewhere
in 2.4 - maybe 2.4.23, where were some ethtool fixes???

M.

Dne po 26. července 2004 03:27 Rob Couto napsal(a):
> This is weird. I'm able to try 4 machines: one has a RTL8139 card
> (8139too), two others are 1) Kingston and 2) generic cards (tulip), and the
> server uses 2x 3Com (3c59x) cards. and ethtool returns nothing, no data
> from any of them. What am I missing?
>
> "Curiouser and curiouser!"
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:04    [W:0.449 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site