lkml.org 
[lkml]   [2004]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: 3C905 and ethtool
    Date
    Hi,

    my computer is Dell workstation 400 with SMP support

    # lspci
    00:00.0 Host bridge: Intel Corp. 440FX - 82441FX PMC [Natoma] (rev 02)
    00:0d.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01)
    00:0d.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
    00:0d.2 USB Controller: Intel Corp. 82371SB PIIX3 USB [Natoma/Triton II] (rev
    01)
    00:0e.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 02)
    00:10.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium
    II]
    00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev
    30)
    01:08.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
    01:09.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset
    (rev 01)
    01:0b.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U

    dmesg:
    Linux version 2.4.26 (root@Liboc01) (gcc version 3.0.4) #2 SMP Thu Apr 15
    22:26:31 CEST 2004
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    128MB LOWMEM available.
    found SMP MP-table at 000fe710
    hm, page 000fe000 reserved twice.
    hm, page 000ff000 reserved twice.
    hm, page 000f0000 reserved twice.
    On node 0 totalpages: 32768
    zone(0): 4096 pages.
    zone(1): 28672 pages.
    zone(2): 0 pages.
    DMI not present.
    ACPI: Unable to locate RSDP
    Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
    OEM ID: DELL Product ID: WS 400 APIC at: 0xFEE00000
    Processor #0 Pentium(tm) Pro APIC version 17
    Processor #1 Pentium(tm) Pro APIC version 17
    I/O APIC #2 Version 17 at 0xFEC00000.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Processors: 2
    Kernel command line: auto BOOT_IMAGE=linux ro root=801
    video=matrox:vesa:0x1B8,depth:32 apm=smp apm=power-off
    Initializing CPU#0
    Detected 332.389 MHz processor.
    Console: colour VGA+ 80x25
    Calibrating delay loop... 663.55 BogoMIPS
    Memory: 126404k/131072k available (1813k kernel code, 4284k reserved, 425k
    data, 332k init, 0k highmem)
    Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
    Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
    Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 512K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
    CPU: Common caps: 0183fbff 00000000 00000000 00000000
    Enabling fast FPU save and restore... done.
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    mtrr: detected mtrr type: Intel
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 512K
    Intel machine check reporting enabled on CPU#0.
    CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
    CPU: Common caps: 0183fbff 00000000 00000000 00000000
    CPU0: Intel Pentium II (Deschutes) stepping 00
    per-CPU timeslice cutoff: 1461.86 usecs.
    enabled ExtINT on CPU#0
    ESR value before enabling vector: 00000040
    ESR value after enabling vector: 00000000
    Booting processor 1/1 eip 2000
    Initializing CPU#1
    masked ExtINT on CPU#1
    ESR value before enabling vector: 00000000
    ESR value after enabling vector: 00000000
    Calibrating delay loop... 663.55 BogoMIPS
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 512K
    Intel machine check reporting enabled on CPU#1.
    CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
    CPU: Common caps: 0183fbff 00000000 00000000 00000000
    CPU1: Intel Pentium II (Deschutes) stepping 00
    Total of 2 processors activated (1327.10 BogoMIPS).
    ENABLING IO-APIC IRQs
    Setting 2 in the phys_id_present_map
    ...changing IO-APIC physical APIC ID to 2 ... ok.
    init IO_APIC IRQs
    IO-APIC (apicid-pin) 2-0, 2-2, 2-20, 2-21, 2-22, 2-23 not connected.
    ..TIMER: vector=0x31 pin1=-1 pin2=0
    ...trying to set up timer (IRQ0) through the 8259A ...
    ..... (found pin 0) ...works.
    number of MP IRQ sources: 37.
    number of IO-APIC #2 registers: 24.
    testing the IO APIC.......................

    IO APIC #2......
    .... register #00: 02000000
    ....... : physical APIC id: 02
    ....... : Delivery Type: 0
    ....... : LTS : 0
    .... register #01: 00170011
    ....... : max redirection entries: 0017
    ....... : PRQ implemented: 0
    ....... : IO APIC version: 0011
    .... register #02: 00000000
    ....... : arbitration: 00
    .... IRQ redirection table:
    NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    00 003 03 0 0 0 0 0 1 1 31
    01 003 03 0 0 0 0 0 1 1 39
    02 000 00 1 0 0 0 0 0 0 00
    03 003 03 0 0 0 0 0 1 1 41
    04 003 03 0 0 0 0 0 1 1 49
    05 003 03 0 0 0 0 0 1 1 51
    06 003 03 0 0 0 0 0 1 1 59
    07 003 03 0 0 0 0 0 1 1 61
    08 003 03 0 0 0 0 0 1 1 69
    09 003 03 0 0 0 0 0 1 1 71
    0a 003 03 0 0 0 0 0 1 1 79
    0b 003 03 0 0 0 0 0 1 1 81
    0c 003 03 0 0 0 0 0 1 1 89
    0d 003 03 0 0 0 0 0 1 1 91
    0e 003 03 0 0 0 0 0 1 1 99
    0f 003 03 0 0 0 0 0 1 1 A1
    10 003 03 1 1 0 1 0 1 1 A9
    11 003 03 1 1 0 1 0 1 1 B1
    12 003 03 1 1 0 1 0 1 1 B9
    13 003 03 1 1 0 1 0 1 1 C1
    14 000 00 1 0 0 0 0 0 0 00
    15 000 00 1 0 0 0 0 0 0 00
    16 000 00 1 0 0 0 0 0 0 00
    17 000 00 1 0 0 0 0 0 0 00
    IRQ to pin mappings:
    IRQ0 -> 0:0
    IRQ1 -> 0:1
    IRQ3 -> 0:3
    IRQ4 -> 0:4
    IRQ5 -> 0:5
    IRQ6 -> 0:6
    IRQ7 -> 0:7
    IRQ8 -> 0:8
    IRQ9 -> 0:9
    IRQ10 -> 0:10
    IRQ11 -> 0:11
    IRQ12 -> 0:12
    IRQ13 -> 0:13
    IRQ14 -> 0:14
    IRQ15 -> 0:15
    IRQ16 -> 0:16
    IRQ17 -> 0:17
    IRQ18 -> 0:18
    IRQ19 -> 0:19
    .................................... done.
    Using local APIC timer interrupts.
    calibrating APIC timer ...
    ..... CPU clock speed is 332.3765 MHz.
    ..... host bus clock speed is 66.4752 MHz.
    cpu: 0, clocks: 664752, slice: 221584
    CPU0<T0:664752,T1:443168,D:0,S:221584,C:664752>
    cpu: 1, clocks: 664752, slice: 221584
    CPU1<T0:664752,T1:221584,D:0,S:221584,C:664752>
    checking TSC synchronization across CPUs: passed.
    Waiting on wait_init_idle (map = 0x2)
    All processors have done init_idle
    PCI: PCI BIOS revision 2.10 entry at 0xfcbfe, last bus=1
    PCI: Using configuration type 1
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    PCI->APIC IRQ transform: (B0,I13,P3) -> 19
    PCI->APIC IRQ transform: (B0,I16,P0) -> 16
    PCI->APIC IRQ transform: (B0,I17,P0) -> 17
    PCI->APIC IRQ transform: (B1,I8,P0) -> 19
    PCI->APIC IRQ transform: (B1,I9,P0) -> 19
    PCI->APIC IRQ transform: (B1,I11,P0) -> 18
    PCI: Cannot allocate resource region 4 of device 00:0d.1
    Limiting direct PCI/PCI transfers.
    Activating ISA DMA hang workarounds.
    isapnp: Scanning for PnP cards...
    isapnp: Card 'CS4236'
    isapnp: 1 Plug & Play card detected total
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
    Starting kswapd
    VFS: Disk quotas vdquot_6.5.1
    Journalled Block Device driver loaded
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    matroxfb: Matrox Millennium II (PCI) detected
    matroxfb: MTRR's turned on
    matroxfb: 1024x768x32bpp (virtual: 1024x1024)
    matroxfb: framebuffer at 0xF8000000, mapped to 0xc8805000, size 4194304
    Console: switching to colour frame buffer device 128x48
    fb0: MATROX VGA frame buffer device
    Detected PS/2 Mouse Port.
    pty: 256 Unix98 ptys configured
    keyboard: Timeout - AT keyboard not present?(ed)
    keyboard: Timeout - AT keyboard not present?(f4)
    Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
    ISAPNP enabled
    ttyS00 at 0x03f8 (irq = 4) is a 16550A
    ttyS01 at 0x02f8 (irq = 3) is a 16550A
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a National Semiconductor PC87306
    3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
    See Documentation/networking/vortex.txt
    00:11.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xec00. Vers LK1.1.18-ac
    00:50:04:0b:73:4a, IRQ 17
    product code 5451 rev 00.12 date 01-08-99
    Internal config register is 1800000, transceivers 0xa.
    8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
    MII transceiver found at address 24, status 786d.
    Enabling bus-master transmits and whole-frame receives.
    00:11.0: scatter/gather enabled. h/w checksums enabled
    See Documentation/networking/vortex.txt
    01:08.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xfcc0. Vers LK1.1.18-ac
    00:c0:4f:a2:ed:0e, IRQ 19
    product code 0000 rev 00.0 date 07-03-97
    Internal config register is 1630218, transceivers 0xe040.
    8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
    MII transceiver found at address 24, status 786f.
    Enabling bus-master transmits and whole-frame receives.
    01:08.0: scatter/gather enabled. h/w checksums disabled
    eth1: Dropping NETIF_F_SG since no checksum feature.
    Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    PIIX3: IDE controller at PCI slot 00:0d.1
    PIIX3: chipset revision 0
    PIIX3: not 100% native mode: will probe irqs later
    PIIX3: neither IDE port enabled (BIOS)
    SCSI subsystem driver Revision: 1.00
    scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
    <Adaptec 2940 Ultra SCSI adapter>
    aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

    (scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
    Vendor: WDIGTL Model: WDE4360-1807A3 Rev: 1.80
    Type: Direct-Access ANSI SCSI revision: 02
    (scsi0:A:5): 10.000MB/s transfers (10.000MHz, offset 15)
    Vendor: NEC Model: CD-ROM DRIVE:464 Rev: 1.05
    Type: CD-ROM ANSI SCSI revision: 02
    scsi0:A:0:0: Tagged Queuing enabled. Depth 253
    Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
    SCSI device sda: 8388314 512-byte hdwr sectors (4295 MB)
    Partition check:
    sda: sda1 sda2
    usb.c: registered new driver usbdevfs
    usb.c: registered new driver hub
    host/usb-uhci.c: $Revision: 1.275 $ time 22:27:50 Apr 15 2004
    host/usb-uhci.c: High bandwidth mode enabled
    host/usb-uhci.c: USB UHCI at I/O 0xece0, IRQ 19
    host/usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 1
    hub.c: USB hub found
    hub.c: 2 ports detected
    host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
    Initializing Cryptographic API
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 1024 buckets, 8Kbytes
    TCP: Hash tables configured (established 8192 bind 8192)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 332k freed
    Adding Swap: 192772k swap-space (priority -1)
    EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
    Real Time Clock Driver v1.10f
    ip_conntrack version 2.1 (1024 buckets, 8192 max) - 288 bytes per conntrack
    ip_tables: (C) 2000-2002 Netfilter core team
    hostap_crypt: registered algorithm 'NULL'
    hostap_pci: 0.1.3 - 2004-02-08 (Jouni Malinen <jkmaline@cc.hut.fi>)
    hostap_pci: Registered netdevice wlan0
    wlan0: trying to read PDA from 0x007f0000: OK
    wlan0: NIC: id=0x8013 v1.0.0
    wlan0: PRI: id=0x15 v1.1.1
    wlan0: STA: id=0x1f v1.8.0
    wlan0: Intersil Prism2.5 PCI: mem=0xfafff000, irq=19
    hostap_crypt: registered algorithm 'WEP'


    Dne ne 25. července 2004 11:28 Rob Couto napsal(a):
    > On Sunday 25 July 2004 04:16 am, Bc. Michal Semler wrote:
    > > Hi,
    > >
    > > I wanted to get info about my NIC via ethtool, but it writes:
    > > # ethtool eth0
    > > Cannot get device settings: Operation not supported
    > > # ethtool eth1
    > > Cannot get device settings: Operation not supported
    > >
    > > 00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
    > > (rev 30)
    > > 01:08.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
    >
    > what are the odds!? look at this...
    > (slackware 10, 2.4.26 with only Win4Lin patch)
    >
    > bash-2.05b# lspci
    > 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory
    > Controller Hub (rev 02)
    > 00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 02)
    > 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI
    > Bridge (rev 02)
    > 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 02)
    > 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 02)
    > 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 02)
    > 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 02)
    > 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 02)
    > 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP
    > 1X/2X (rev 5c)
    > 02:04.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
    > 02:07.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
    > (rev 64)
    > 02:0a.0 RAID bus controller: Promise Technology, Inc. 20265 (rev 02)
    > bash-2.05b# ethtool eth0
    > Settings for eth0:
    > No data available
    > bash-2.05b# ethtool eth1
    > Settings for eth1:
    > No data available
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 14:04    [W:0.043 / U:0.232 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site