[lkml]   [2004]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [ltp] Re: ACPI Hibernate and Suspend Strange behavior 2.6.7/-mm1
* John Goerzen:

> I'm glad I'm not the only one that is suspecting that. I just tried
> switching my T40p from APM to ACPI. I got suspending to RAM working in
> ACPI, but noticed that when I got it back out of my laptop bag later, it
> was physically warm to the touch.

Oh. My expriences, starting with 2.6.7 with ACPI, are as following:

- Suspend to RAM is triggered, for example by closing the lid.

- If it's under X11, the system does not come back. Display powers
up, but it remains black. There is some HDD activity, so it's
probably still running. Next time I should check if the IP stack
is still running.

- After terminating the X11 server, other devices on the sharded IRQ
11 are dead (most prominently, e1000 and USB).

This is a T40p. Behavior with 2.6.8-rc1 is apparently the same.

Any ideas what to try next?
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 14:04    [W:0.096 / U:3.164 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site