lkml.org 
[lkml]   [2004]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.7-rc2-mm1
Andrew Morton wrote:

>Sid Boyce <sboyce@blueyonder.co.uk> wrote:
>
>
>>As with 2.6.7-rc1-mm1, I'm seeing the same problem on 2.6.7-rc2-mm1.
>> 2.6.7-rc1 and 2.6.7-rc2 are OK. It hangs needing a hard reset setting up
>> /dev/pts, with console=ttyS1 .... same as before. SuSE 9.1 on A7N8X-E
>> nforce2 chipset.
>>
>>
>
>Works OK here. Is it the `console=ttyS1' which is causing the hang? If
>not, what? Try removing boot options, stripping config options, etc.
>
>
>
>
>
It just freezes, I then use console=ttyS1 simply to capture the
messages. SYSRQ does nothing and the only way out is to press the reset
switch. I shall try 2.6.7-rc2-mm2 later with different and with no
commandline options if it also freezes.
I start with the same basic .config for all kernels (make oldconfig)
and grub is setup as below, 2.6.7-rc2-mm1 freezes and 2.6.7-rc2 is fine,
2.6.7-rc1-mm1 froze, 2.6.7-rc1 was fine.

title 2.6.7-rc2-mm1
kernel (hd0,0)/boot/2.6.7-rc2-mm1 root=/dev/hda1 vga=0x31a
splash=silent desktop hdb=ide-cd showopts

title 2.6.7-rc2
kernel (hd0,0)/boot/2.6.7-rc2 root=/dev/hda1 vga=0x31a splash=silent
desktop hdb=ide-cd showopts

Regards
Sid.

--
Sid Boyce .... Hamradio G3VBV and keen Flyer
Linux Only Shop.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:03    [W:0.061 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site