[lkml]   [2004]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Programtically tell diff between HT and real
On Thu, 17 Jun 2004, Mikael Pettersson wrote:

> On Wed, 16 Jun 2004 17:58:26 -0400 (EDT), Richard B. Johnson wrote:
> >> > I would love to know how you turn in on! This is one of those
> >> > "latest-and-greatest" Intel D865PERL mother-boards and I've
> >> > even flashed the BIOS with the "latest-and-greatest".
> >>
> >> The usual way is to enable HT in BIOS, and use a SMP enabled kernel.
> >>
> >
> >It's a SMP kernel. There is no 'HT enable' in the BIOS setup.
> >In fact, there is very little that can be set and, it's even
> >very hard to convince it that I want to boot from a SCSI and
> >not from the first disk it finds. One has to remove the battery
> >to discharge the CMOS so it won't ignore the 'Del' key
> >on startup. It's a very bad BIOS or a very bad board, I
> >don't know which.
> Or you forgot to enable ACPI in the kernel.
> For some reason, the MP tables aren't capable of
> describing HT siblings, so the BIOSen do that
> via the ACPI tables instead.

I'll look, thanks.

Dick Johnson
Penguin : Linux version 2.4.26 on an i686 machine (5570.56 BogoMips).
Note 96.31% of all statistics are fiction.

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 14:03    [W:0.037 / U:1.868 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site