lkml.org 
[lkml]   [2004]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: IO-APIC on nforce2 [PATCH] + [PATCH] for nmi_debug=1 + [PATCH] for idle=C1halt, 2.6.5
Len Brown wrote:
> On Thu, 2004-04-22 at 13:21, Len Brown wrote:
>
>
>>>As for your patch, I get a fast timer, and gain about 1 sec per 5 minutes.
>>>The only patch that seemed to work without a fast timer so far was the one
>>>removed by Linus in a testing version. The AN35N has the timer override
>>>bug.
>>
>>Hmm, I didn't notice fast time on my FN41, i'll look for it.
>>
>>I'm not familiar with the "one removed by Linux in a testing version",
>>perhaps you could point me to that?
>
>
> date seems to gain 9sec/hour on my Shuttle/SN41G2/FN41 when using IOAPIC
> timer.

Do you get lock-ups wihtout the timer_ack/C1halt patch? If yes, this may
be the cause. I remember someone finding out that Ross' patch made the
timer actually slower which resulted in stable operation. Maciej found
out, not connecting the timer at all made it stabke as well. So is there
a possibility to sync both timers?

According to a recent post, builöding kernel with SMP makes it stable,
as well, but I haven't tested.

> booted with "noapic" for XT-PIC timer, it stays locked
> onto my wristwatch after an hour. If the workaround is disabled,
> and XT-PIC timer is used, it matches the "noapic" behaviour -- no drift.
>
> I can't explain it. I think it is a timer problem independent of the
> IRQ routing.
>
> -Len
>
> ps. when i ran in XT-PIC mode there were lots of ERR's registered in
> /proc/interrupts -- doesn't look healthy.
>
>
>
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:02    [W:0.184 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site