Messages in this thread | | | Date | Mon, 19 Apr 2004 12:42:54 -0500 | From | Matt Mackall <> | Subject | Re: Problem with Netpoll based netdumping and NAPI |
| |
[changed cc: from linux-net to netdev]
On Mon, Apr 19, 2004 at 06:21:48PM +0530, Hariprasad Nellitheertha wrote: > Hi All, > > I am facing a problem while trying to network dump using LKCD. My > debugging so far indicates that this is due to both NAPI and NETPOLL > being enabled. > > I am using LKCD on the 2.6.5 kernel and both the client and server are > i386 boxes. The dumping machine has an e100 card. I have built the kernel > with both CONFIG_E100_NAPI and CONFIG_NET_POLL_CONTROLLER (and the other > netpoll related options) selected. > > LKCD uses netpoll for its network dump implementation. The problem we see > is that the network dump driver does not receive any packet from the > card driver and hence dumping fails. In e100_intr(), we call > netif_rx_schedule() if we are using the NAPI feature. netif_rx_schedule, > in turn, ends up adding the processing of this packet to the NET_RX_SOFTIRQ > softirq.
Netpoll should be manually calling the NAPI poll function like this after calling the interrupt handler (in netpoll_poll()):
/* If scheduling is stopped, tickle NAPI bits */ if(trapped && np->dev->poll && test_bit(__LINK_STATE_RX_SCHED, &np->dev->state)) np->dev->poll(np->dev, &budget);
Please ensure that LKCD is calling netpoll_set_trap(1) which tells it that packet scheduling is stopped.
I've tested this path primarily with tg3 and kgdb-over-ethernet, but it should be functionally quite similar to e100 and lkcd.
-- Matt Mackall : http://www.selenic.com : Linux development and consulting - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |