lkml.org 
[lkml]   [2004]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Marvell PATA-SATA bridge meets 2.4.x
On Sat, 06 Mar 2004 19:55:00 -0800
Mike Fedyk <mfedyk@matchmail.com> wrote:

> Rumi Szabolcs wrote:
> > As it can be seen below, a native SATA150 drive is connected
> > to a SATA port implemented using that Marvell chip hooked up
> > to the ICH4's parallel ATA133 port and this way the drive is
> > only recognized (and used) as UDMA33:
> >
> > hdc: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(33)
> >
> > As far as I can remember someone (Jeff Garzik?) suspected the
> > SATA cable not being recognized as a 80-conductor thus >=UDMA66
> > capable cable. Then it was told that there is a fix underway that
> > will be included in the 2.4.23 kernel. The above snippet shows
> > that the 2.4.25 kernel still has this problem. Any comments?
>
> You want to use a 2.6 kernel and talk to Bart, and Jeff about this...

Well, I don't really want a 2.6 kernel on that machine (yet) because
in my opinion it is not stable enough for a production system.

Would it be hard to fix that in 2.4?

Regards,
Szabolcs Rumi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:01    [W:0.084 / U:1.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site