Messages in this thread | | | Date | Sun, 8 Feb 2004 19:08:12 -0800 | From | "Randy.Dunlap" <> | Subject | Re: 2 PROBLEMs: mkinitrd fails during make install (2.6.1) + first network connect fails after boot (2.6.1) |
| |
On Sun, 08 Feb 2004 14:16:17 -0500 Matthew Caron <matt@mattcaron.net> wrote:
| PROBLEM 1: | | 1. Summary: | mkinitrd fails during make install (2.6.1) | | 2. Description: | mkinitrd fails with error: | | No module 3w-xxxx found for kernel 2.6.1 | mkinitrd failed | make[1]: *** [install] Error 1 | make: *** [install] Error 2 | | config command was: 'make xconfig' | build command was: 'make clean modules_install install'
What version of mkinitrd? Please send output from 'mkinitrd --version'. Latest version seems to be 3.5.18.
| 3. Keywords: | 2.6.1 mkinitrd 3w-xxxx | | 4. Kernel Version: | Linux version 2.6.1 (root@localhost.localdomain) (gcc version 3.3.2 | 20031022 (Red Hat Linux 3.3.2-1)) #4 Sun Feb 8 00:38:13 EST 2004 | | 5. Oops: | None | | 6. Trigger: | config included below: [snipped]
Wow, I almost missed prob. 2. Probably better as separate postings.
| PROBLEM 2: | | 1. Summary: | first network connect fails after boot | | 2. Description: | The first connection to any host on any port fails after boot/reboot. | Subsequent connects work fine. Typical errors are: | | ssh: connect to host foobar port 22: Resource temporarily unavailable | | Firebird reports "Document Contains No Data" | | 3. Keywords: | 2.6.1 network connection failure | | 4. Kernel Version: | Linux version 2.6.1 (root@case) (gcc version 3.3.2 20031022 (Red Hat | Linux 3.3.2-1)) #9 SMP Sun Feb 8 12:55:51 EST 2004 | | 5. Oops: | None | | 6. Trigger: | ssh-ing to something shows the problem quite well. | config included below: [snipped]
| 7. Environment: | 7.1 Software: | Linux case 2.6.1 #9 SMP Sun Feb 8 12:55:51 EST 2004 i686 athlon i386 | GNU/Linux | | Gnu C 3.3.2 | Gnu make 3.79.1 | util-linux 2.11y | mount 2.11y | module-init-tools 2.4.25 | e2fsprogs 1.34 | jfsutils 1.1.3 | reiserfsprogs 3.6.8 | pcmcia-cs 3.1.31 | quota-tools 3.06. | PPP 2.4.1 | nfs-utils 1.0.6 | Linux C Library 2.3.2 | Dynamic linker (ldd) 2.3.2 | Procps 2.0.17 | Net-tools 1.60 | Kbd 1.08 | Sh-utils 5.0 | Modules Loaded | | 7.2 Processor: | processor : 0 | vendor_id : AuthenticAMD | cpu family : 6 | model : 6 | model name : AMD Athlon(tm) Processor | stepping : 2 | cpu MHz : 1000.490 | cache size : 256 KB | fdiv_bug : no | hlt_bug : no | f00f_bug : no | coma_bug : no | fpu : yes | fpu_exception : yes | cpuid level : 1 | wp : yes | flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge | mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow | bogomips : 1966.08 | | processor : 1 | vendor_id : AuthenticAMD | cpu family : 6 | model : 6 | model name : AMD Athlon(tm) Processor | stepping : 2 | cpu MHz : 1000.490 | cache size : 256 KB | fdiv_bug : no | hlt_bug : no | f00f_bug : no | coma_bug : no | fpu : yes | fpu_exception : yes | cpuid level : 1 | wp : yes | flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge | mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow | bogomips : 1998.84 | | 7.3 Module Info: | (none) | | 7.4: Driver/Hardware: | /proc/ioports: | 0000-001f : dma1 | 0020-0021 : pic1 | 0040-005f : timer | 0060-006f : keyboard | 0070-0077 : rtc | 0080-008f : dma page reg | 00a0-00a1 : pic2 | 00c0-00df : dma2 | 00f0-00ff : fpu | 0170-0177 : ide1 | 01f0-01f7 : ide0 | 02f8-02ff : serial | 0376-0376 : ide1 | 0378-037a : parport0 | 037b-037f : parport0 | 03c0-03df : vga+ | 03f6-03f6 : ide0 | 03f8-03ff : serial | 0cf8-0cff : PCI conf1 | 1000-101f : 0000:00:08.0 | 1000-101f : e1000 | 1030-1033 : 0000:00:00.0 | 2000-2fff : PCI Bus #01 | 2000-20ff : 0000:01:05.0 | 3000-3fff : PCI Bus #02 | 3000-307f : 0000:02:08.0 | 3000-307f : 0000:02:08.0 | 3080-309f : 0000:02:07.0 | 3080-309f : EMU10K1 | 30a0-30af : 0000:02:06.0 | 30a0-30af : 3ware Storage Controller | 30b0-30b7 : 0000:02:07.1 | 30b0-30b7 : emu10k1-gp | f000-f00f : 0000:00:07.1 | f000-f007 : ide0 | f008-f00f : ide1 | | /proc/iomem: | 00000000-0009efff : System RAM | 0009f000-0009ffff : reserved | 000a0000-000bffff : Video RAM area | 000cd000-000cd7ff : Extension ROM | 000cd800-000cefff : Extension ROM | 000cf000-000cffff : Extension ROM | 000e0000-000effff : Extension ROM | 000f0000-000fffff : System ROM | 00100000-1feeffff : System RAM | 00100000-0044a6f8 : Kernel code | 0044a6f9-0058f0bf : Kernel data | 1fef0000-1fefefff : ACPI Tables | 1feff000-1fefffff : ACPI Non-volatile Storage | 1ff00000-1ff7ffff : System RAM | 1ff80000-1fffffff : reserved | d0000000-d001ffff : 0000:00:08.0 | d0000000-d001ffff : e1000 | d0020000-d003ffff : 0000:00:08.0 | d0020000-d003ffff : e1000 | d0100000-d01fffff : PCI Bus #01 | d0100000-d010ffff : 0000:01:05.0 | d0200000-d02fffff : PCI Bus #02 | d0200000-d0203fff : 0000:02:04.0 | d0204000-d0204fff : 0000:02:00.0 | d0204000-d0204fff : ohci_hcd | d0205000-d02057ff : 0000:02:04.0 | d0205000-d02057ff : ohci1394 | d0205800-d020587f : 0000:02:08.0 | d0500000-d0500fff : 0000:00:00.0 | d8000000-dfffffff : 0000:00:00.0 | e0000000-efffffff : PCI Bus #01 | e0000000-efffffff : 0000:01:05.0 | fec00000-fec03fff : reserved | fee00000-fee00fff : reserved | fff80000-ffffffff : reserved | | 7.5 PCI Info: | 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] | System Controller (rev 11) | Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- | Stepping- SERR- FastB2B- | Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort+ >SERR- <PERR- | Latency: 32 | Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] | Region 1: Memory at d0500000 (32-bit, prefetchable) [size=4K] | Region 2: I/O ports at 1030 [disabled] [size=4] | Capabilities: <available only to root> | | 00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] | AGP Bridge (prog-if 00 [Normal decode]) | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- | Stepping- SERR- FastB2B- | Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort- >SERR- <PERR- | Latency: 99 | Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 | I/O behind bridge: 00002000-00002fff | Memory behind bridge: d0100000-d01fffff | Prefetchable memory behind bridge: e0000000-efffffff | BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- | | 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 05) | Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- | Stepping- SERR- FastB2B- | Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort- >SERR- <PERR- | Latency: 0 | | 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE | (rev 04) (prog-if 8a [Master SecP PriP]) | Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE | Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- | Stepping- SERR- FastB2B- | Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort- >SERR- <PERR- | Latency: 0 | Region 4: I/O ports at f000 [size=16] | | 00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03) | Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI | Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- | Stepping- SERR- FastB2B- | Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort- >SERR- <PERR- | | 00:08.0 Ethernet controller: Intel Corp. 82544EI Gigabit Ethernet | Controller (Copper) (rev 02) | Subsystem: Intel Corp. PRO/1000 XT Server Adapter | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- | Stepping- SERR- FastB2B- | Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort- >SERR- <PERR- | Latency: 64 (63750ns min), cache line size 10 | Interrupt: pin A routed to IRQ 20 | Region 0: Memory at d0020000 (32-bit, non-prefetchable) [size=128K] | Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=128K] | Region 2: I/O ports at 1000 [size=32] | Expansion ROM at <unassigned> [disabled] [size=128K] | Capabilities: <available only to root> | | 00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev | 05) (prog-if 00 [Normal decode]) | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- | Stepping- SERR- FastB2B- | Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort+ >SERR- <PERR- | Latency: 64 | Bus: primary=00, secondary=02, subordinate=02, sec-latency=168 | I/O behind bridge: 00003000-00003fff | Memory behind bridge: d0200000-d02fffff | Prefetchable memory behind bridge: fff00000-000fffff | BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- | | 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QM | [Radeon 9100] (prog-if 00 [VGA]) | Subsystem: PC Partner Limited: Unknown device 7149 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- | Stepping+ SERR- FastB2B+ | Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort- >SERR- <PERR- | Latency: 66 (2000ns min), cache line size 10 | Interrupt: pin A routed to IRQ 18 | Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] | Region 1: I/O ports at 2000 [size=256] | Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K] | Expansion ROM at <unassigned> [disabled] [size=128K] | Capabilities: <available only to root> | | 02:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-768 [Opus] USB | (rev 07) (prog-if 10 [OHCI]) | Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] USB | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- | Stepping- SERR- FastB2B- | Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort- >SERR- <PERR+ | Latency: 64 (20000ns max) | Interrupt: pin D routed to IRQ 19 | Region 0: Memory at d0204000 (32-bit, non-prefetchable) [size=4K] | | 02:04.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 | IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) | Subsystem: Adaptec: Unknown device 0030 | Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- | Stepping- SERR- FastB2B- | Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort- >SERR- <PERR- | Latency: 64 (750ns min, 1000ns max), cache line size 10 | Interrupt: pin A routed to IRQ 16 | Region 0: Memory at d0205000 (32-bit, non-prefetchable) [size=2K] | Region 1: Memory at d0200000 (32-bit, non-prefetchable) [size=16K] | Capabilities: <available only to root> | | 02:06.0 RAID bus controller: 3ware Inc 3ware ATA-RAID (rev 12) | Subsystem: 3ware Inc 3ware ATA-RAID | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- | Stepping+ SERR- FastB2B- | Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort- >SERR- <PERR- | Latency: 64 (2250ns min) | Interrupt: pin A routed to IRQ 18 | Region 0: I/O ports at 30a0 [size=16] | Expansion ROM at <unassigned> [disabled] [size=64K] | | 02:07.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 05) | Subsystem: Creative Labs CT4760 SBLive! | Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- | Stepping- SERR- FastB2B- | Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort- >SERR- <PERR- | Latency: 64 (500ns min, 5000ns max) | Interrupt: pin A routed to IRQ 19 | Region 0: I/O ports at 3080 [size=32] | Capabilities: <available only to root> | | 02:07.1 Input device controller: Creative Labs SB Live! MIDI/Game Port | (rev 05) | Subsystem: Creative Labs Gameport Joystick | Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- | Stepping- SERR- FastB2B- | Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort- >SERR- <PERR- | Latency: 64 | Region 0: I/O ports at 30b0 [size=8] | Capabilities: <available only to root> | | 02:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] | (rev 78) | Subsystem: Tyan Computer: Unknown device 2466 | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- | Stepping- SERR- FastB2B- | Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- | <TAbort- <MAbort- >SERR- <PERR- | Latency: 80 (2500ns min, 2500ns max), cache line size 10 | Interrupt: pin A routed to IRQ 19 | Region 0: I/O ports at 3000 [size=128] | Region 1: Memory at d0205800 (32-bit, non-prefetchable) [size=128] | Expansion ROM at <unassigned> [disabled] [size=128K] | Capabilities: <available only to root> | | 7.6 SCSI Info: | Attached devices: | Host: scsi0 Channel: 00 Id: 00 Lun: 00 | Vendor: 3ware Model: Logical Disk 0 Rev: 1.0 | Type: Direct-Access ANSI SCSI revision: ffffffff | | 7.7 Other Info: | None that I can think of | | X. Notes: | X.1 Machine 1 (above) does not exhibit this problem. Ethernet cards are | identical. | X.2 This machine exhibits this problem regardless of Ethernet card used. | | Thanks in advance. | --
-- ~Randy - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |