lkml.org 
[lkml]   [2004]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Adaptec 1210SA SATA Controller Performance
Patrick Petermair wrote:
> Hi!
>
> Yesterday I've setup a server with Adaptec's 1210SA SATA Controller and
> 2 SATA disks. According to the kernel changelog the controller is
> supported since 2.6.2
>
> I've installed Debian on an IDE disk, built a 2.6.3 kernel with
> CONFIG_SCSI_SATA_SIL, rebooted and the kernel detected the controller
> plus both SATA disks (sda, sdb). As the next step I wanted to create a
> software raid 1 with the 2 SATA disks. Because it took mdadm forever to
> finish, I checked /proc/mdstat and saw a progress bar with a rate of
> 12MB/s!


Do you have Seagate disks?

Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:01    [W:0.131 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site