Messages in this thread | | | Date | Tue, 24 Feb 2004 11:04:39 -0500 | From | Joe Korty <> | Subject | Re: [BK PATCH] SCSI update for 2.6.3 |
| |
On Tue, Feb 24, 2004 at 09:34:25AM -0600, James Bottomley wrote: > On Tue, 2004-02-24 at 09:24, Joe Korty wrote: > > I am getting a panic out of the 2.6.3 Fusion driver when no devices > > are attached to it. Does the above update fix it? If so, I would > > like to get a copy of the above in patch form. If not, I can send > > you a copy of my boot log. > > Well, without a bug report I don't really have any idea. > > The patch is here: > > http://marc.theaimsgroup.com/?l=linux-scsi&m=107670916906716&w=2
Hi James, Tried the patch, no luck. The panic is on an Opteron board which has an IDE rather than a SCSI disk. I have another system, identical to the above, that has a SCSI rather than IDE disk, and it boots. 2.6.1 boots on both systems.
Regards, Joe
... Using anticipatory io scheduler FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k1 Copyright (c) 1999-2004 Intel Corporation. tg3.c:v2.6 (February 3, 2004) eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCI:33MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:51:d8:fd eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCI:33MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:51:d8:fe Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 0000:00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: ST380011A, ATA DISK drive isa bounce pool size: 16 pages ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 > hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 Red Hat/Adaptec aacraid driver (1.1.2-lk1 Feb 24 2004) Fusion MPT base driver 3.00.03 Copyright (c) 1999-2003 LSI Logic Corporation mptbase: Initiating ioc0 bringup mptbase: ioc0: ERROR - Doorbell ACK timeout(2)! mptbase: ioc0: ERROR - Diagnostic reset FAILED! (102h) mptbase: ioc0 NOT READY WARNING! mptbase: WARNING - ioc0 did not initialize properly! (-1) mptbase: probe of 0000:02:0a.0 failed with error -1 mptbase: Initiating ioc1 bringup mptbase: ioc1: ERROR - Doorbell ACK timeout(2)! mptbase: ioc1: ERROR - Diagnostic reset FAILED! (102h) mptbase: ioc1 NOT READY WARNING! mptbase: WARNING - ioc1 did not initialize properly! (-1) mptbase: probe of 0000:02:0a.1 failed with error -1 Fusion MPT SCSI Host driver 3.00.03 Unable to handle kernel NULL pointer dereference at 0000000000000018 RIP: <ffffffff80823a1f>{mptscsih_init+175}PML4 0 Oops: 0000 [1] CPU 0 Pid: 1, comm: swapper Not tainted RIP: 0010:[<ffffffff80823a1f>] <ffffffff80823a1f>{mptscsih_init+175} RSP: 0000:000001007afe1f18 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000100089a4d20 RCX: 000000000000000c RDX: 00000100089a4d20 RSI: ffffffff804546b0 RDI: 000001017fe1f398 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 000001017fdfa160 R11: 00000000000000c0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff807fa540(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000018 CR3: 0000000000101000 CR4: 00000000000006a0 Process swapper (pid: 1, stackpage=10008898500) Stack: ffffffff8082fb70 ffffffff8080788d 0000000000000246 0000000000000000 0000000000000000 ffffffff8010b16e 0000000000000000 ffffffff8010fec7 0000000000000000 0000000000000000 Call Trace:<ffffffff8080788d>{do_initcalls+77} <ffffffff8010b16e>{init+110} <ffffffff8010fec7>{child_rip+8} <ffffffff8010b100>{init+0} <ffffffff8010febf>{child_rip+0}
Code: 48 8b 70 18 e8 68 d4 c2 ff 48 89 df e8 50 66 c2 ff 48 85 c0 RIP <ffffffff80823a1f>{mptscsih_init+175} RSP <000001007afe1f18> CR2: 0000000000000018 <0>Kernel panic: Attempted to kill init!
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |