lkml.org 
[lkml]   [2004]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectProblems with 2.6.10
Date
Hi everyone!



I have so strange problem with kernel 2.6.10. Kernel works good, but

problem starts when I do reboot. On boot screen my bios can't detect

my disk. Bios stops and nothing. So without end. Button reset on my

towel can't fix it. To fix this situation I must turn off and turn

on my computer. Only it helps. With kernel 2.6.9 wasn't so problem.

How to fix it?



I send my /proc/cpuinfo (all these informations from kernel 2.6.9):

-------------------------
processor : 0

vendor_id : AuthenticAMD

cpu family : 5

model : 8

model name : AMD-K6(tm) 3D processor

stepping : 12

cpu MHz : 451.145

cache size : 64 KB

fdiv_bug : no

hlt_bug : no

f00f_bug : no

coma_bug : no

fpu : yes

fpu_exception : yes

cpuid level : 1

wp : yes

flags : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow k6_mtrr

bogomips : 886.78

-------------------------


/proc/iomem

-------------------------
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-03feffff : System RAM
00100000-0035096c : Kernel code
0035096d-004426ff : Kernel data

03ff0000-03ff07ff : ACPI Non-volatile Storage
03ff0800-03ffffff : ACPI Tables
e0000000-e3ffffff : 0000:00:00.0
e4000000-e5ffffff : PCI Bus #01
e5000000-e5000fff : 0000:01:00.0
e6000000-e6ffffff : PCI Bus #01
e6000000-e6ffffff : 0000:01:00.0
e7000000-e70000ff : 0000:00:09.0
ffff0000-ffffffff : reserved
-------------------------


/proc/ioports:

-------------------------
0000-001f : dma1
0020-0021 : pic1

0040-0043 : timer0

0050-0053 : timer1

0060-006f : keyboard

0070-0077 : rtc

0080-008f : dma page reg

00a0-00a1 : pic2

00c0-00df : dma2

00f0-00ff : fpu

0170-0177 : ide1

01f0-01f7 : ide0

0213-0213 : ISAPnP

0300-0301 : MPU401 UART

0376-0376 : ide1

0388-0389 : OPL2/3 (left)

038a-038b : OPL2/3 (right)

03c0-03df : vga+

03f6-03f6 : ide0

0500-050f : AD1816A

0a79-0a79 : isapnp write

0cf8-0cff : PCI conf1

6000-60ff : 0000:00:07.3
6000-6003 : PM1a_EVT_BLK

6004-6005 : PM1a_CNT_BLK

6008-600b : PM_TMR

6020-6023 : GPE0_BLK

c000-cfff : PCI Bus #01

c000-c0ff : 0000:01:00.0
e000-e01f : 0000:00:07.2
e000-e01f : uhci_hcd

e400-e40f : 0000:00:07.1
e400-e407 : ide0

e408-e40f : ide1

-------------------------


Command lspci -vvv:

-------------------------
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3]

(rev 04)

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-

Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort- >SERR- <PERR+

Latency: 16

Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0

Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-

64bit- FW- AGP3- Rate=x1,x2

Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>



00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo

MVP3/Pro133x AGP] (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-

Stepping- SERR- FastB2B-

Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort+ >SERR- <PERR-

Latency: 0

Bus: primary=00, secondary=01, subordinate=01, sec-latency=0

I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: e6000000-e6ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-



00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA

[Apollo VP] (rev 41)

Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-

Stepping+ SERR- FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort- >SERR- <PERR-

Latency: 0



00:07.1 IDE interface: VIA Technologies, Inc.

VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev

06) (prog-if 8a [Master SecP PriP])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-

Stepping- SERR- FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort- >SERR- <PERR-

Latency: 64

Region 4: I/O ports at e400 [size=16]



00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 02) (prog-if

00 [UHCI])

Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-

Stepping- SERR- FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort- >SERR- <PERR-

Latency: 64, cache line size 08

Interrupt: pin D routed to IRQ 11

Region 4: I/O ports at e000 [size=32]



00:07.3 PCI bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)

(prog-if 00 [Normal decode])

!!! Invalid class 0604 for header type 00

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-

Stepping- SERR- FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort- >SERR- <PERR-

Interrupt: pin ? routed to IRQ 9



00:09.0 Communication controller: Analog Devices SM56 PCI modem

Subsystem: Analog Devices SM56 PCI modem

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-

Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort- >SERR- <PERR+

Latency: 64 (250ns min, 63750ns max)

Interrupt: pin A routed to IRQ 10

Region 0: Memory at e7000000 (32-bit, prefetchable) [size=256]
Capabilities: [dc] Power Management version 2

Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA

PME(D0+,D1-,D2+,D3hot+,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-



01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC

AGP (rev 3a) (prog-if 00 [VGA])

Subsystem: ATI Technologies Inc: Unknown device 0088

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-

Stepping+ SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort- >SERR- <PERR-

Latency: 64 (2000ns min), cache line size 08

Region 0: Memory at e6000000 (32-bit, prefetchable) [size=16M]
Region 1: I/O ports at c000 [size=256]

Region 2: Memory at e5000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]

Capabilities: [5c] Power Management version 1

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA

PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

-------------------------


And at the end a part from log file (kernel 2.6.10):

-------------------------
Dec 27 17:13:15 frycek kernel: Linux version 2.6.10

(root@frycek.com.pl) (gcc version 3.4.3 (Mandrakelinux 10.2

3.4.3-1mdk)) #2 Mon Dec 27 16:56:31 CET 2004

Dec 27 17:13:15 frycek kernel: BIOS-provided physical RAM map:

Dec 27 17:13:15 frycek kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Dec 27 17:13:15 frycek kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Dec 27 17:13:15 frycek kernel: BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Dec 27 17:13:15 frycek kernel: BIOS-e820: 0000000000100000 -
0000000003ff0000 (usable)
Dec 27 17:13:15 frycek kernel: BIOS-e820: 0000000003ff0000 -
0000000003ff0800 (ACPI NVS)
Dec 27 17:13:15 frycek kernel: BIOS-e820: 0000000003ff0800 -
0000000004000000 (ACPI data)
Dec 27 17:13:15 frycek kernel: BIOS-e820: 00000000ffff0000 -
0000000100000000 (reserved)
Dec 27 17:13:15 frycek kernel: 63MB LOWMEM available.

Dec 27 17:13:15 frycek kernel: On node 0 totalpages: 16368

Dec 27 17:13:15 frycek kernel: DMA zone: 4096 pages, LIFO batch:1

Dec 27 17:13:15 frycek kernel: Normal zone: 12272 pages, LIFO batch:2

Dec 27 17:13:15 frycek kernel: HighMem zone: 0 pages, LIFO batch:1

Dec 27 17:13:15 frycek kernel: DMI 2.1 present.

Dec 27 17:13:15 frycek kernel: Built 1 zonelists

Dec 27 17:13:15 frycek kernel: Kernel command line:

BOOT_IMAGE=Linux-2.6.10 ro root=341

Dec 27 17:13:15 frycek kernel: No local APIC present or hardware

disabled

Dec 27 17:13:15 frycek kernel: mapped APIC to ffffd000 (01081000)
Dec 27 17:13:15 frycek kernel: Initializing CPU#0

Dec 27 17:13:15 frycek kernel: PID hash table entries: 256 (order:

8, 4096 bytes)

Dec 27 17:13:15 frycek kernel: Detected 451.131 MHz processor.

Dec 27 17:13:15 frycek kernel: Using tsc for high-res timesource

Dec 27 17:13:15 frycek kernel: Console: colour VGA+ 80x25

Dec 27 17:13:15 frycek kernel: Dentry cache hash table entries:

16384 (order: 4, 65536 bytes)

Dec 27 17:13:15 frycek kernel: Inode-cache hash table entries: 8192

(order: 3, 32768 bytes)

Dec 27 17:13:15 frycek kernel: Memory: 60956k/65472k available

(2217k kernel code, 4060k reserved, 872k data, 156k init, 0k highmem)

Dec 27 17:13:15 frycek kernel: Checking if this processor honours

the WP bit even in supervisor mode... Ok.

Dec 27 17:13:15 frycek kernel: Calibrating delay loop... 888.83

BogoMIPS (lpj=444416)
Dec 27 17:13:15 frycek kernel: Mount-cache hash table entries: 512

(order: 0, 4096 bytes)

Dec 27 17:13:15 frycek kernel: CPU: After generic identify, caps:

008021bf 808029bf 00000000 00000000
Dec 27 17:13:15 frycek kernel: CPU: After vendor identify, caps:

008021bf 808029bf 00000000 00000000
Dec 27 17:13:15 frycek kernel: CPU: L1 I Cache: 32K (32 bytes/line),

D cache 32K (32 bytes/line)

Dec 27 17:13:15 frycek kernel: CPU: After all inits, caps:

008021bf 808029bf 00000000 00000002
Dec 27 17:13:15 frycek kernel: CPU: AMD-K6(tm) 3D processor stepping 0c

Dec 27 17:13:15 frycek kernel: Checking 'hlt' instruction... OK.

Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 16

Dec 27 17:13:15 frycek kernel: PCI: PCI BIOS revision 2.10 entry at

0xfb360, last bus=2

Dec 27 17:13:15 frycek kernel: PCI: Using configuration type 1

Dec 27 17:13:15 frycek kernel: mtrr: v2.0 (20020519)

Dec 27 17:13:15 frycek kernel: Linux Plug and Play Support v0.97 (c)

Adam Belay

Dec 27 17:13:15 frycek kernel: PnPBIOS: Scanning system for PnP BIOS

support...

Dec 27 17:13:15 frycek kernel: PnPBIOS: Found PnP BIOS installation

structure at 0xc00fbf90

Dec 27 17:13:15 frycek kernel: PnPBIOS: PnP BIOS version 1.0, entry

0xf0000:0xbfb8, dseg 0xf0000
Dec 27 17:13:15 frycek kernel: PnPBIOS: 16 nodes reported by PnP

BIOS; 16 recorded by driver

Dec 27 17:13:15 frycek kernel: PCI: Probing PCI hardware

Dec 27 17:13:15 frycek kernel: PCI: Probing PCI hardware (bus 00)

Dec 27 17:13:15 frycek kernel: PCI: 0000:00:07.3: class 604 doesn't
match header type 00. Ignoring class.

Dec 27 17:13:15 frycek kernel: PCI: Using IRQ router VIA [1106/0586]

at 0000:00:07.0
Dec 27 17:13:15 frycek kernel: pnp: the driver 'system' has been

registered

Dec 27 17:13:15 frycek kernel: pnp: match found with the PnP device

'00:07' and the driver 'system'

Dec 27 17:13:15 frycek kernel: pnp: match found with the PnP device

'00:08' and the driver 'system'

Dec 27 17:13:15 frycek kernel: pnp: match found with the PnP device

'00:0b' and the driver 'system'

Dec 27 17:13:15 frycek kernel: pnp: 00:0b: ioport range 0x208-0x20f

has been reserved

Dec 27 17:13:15 frycek kernel: Total HugeTLB memory allocated, 0

Dec 27 17:13:15 frycek kernel: VFS: Disk quotas dquot_6.5.1

Dec 27 17:13:15 frycek kernel: Dquot-cache hash table entries: 1024

(order 0, 4096 bytes)

Dec 27 17:13:15 frycek kernel: devfs: 2004-01-31 Richard Gooch

(rgooch@atnf.csiro.au)

Dec 27 17:13:15 frycek kernel: devfs: boot_options: 0x1

Dec 27 17:13:15 frycek kernel: NTFS driver 2.1.22 [Flags: R/O DEBUG].

Dec 27 17:13:15 frycek kernel: Initializing Cryptographic API

Dec 27 17:13:15 frycek kernel: Activating ISA DMA hang workarounds.

Dec 27 17:13:15 frycek kernel: pci_hotplug: PCI Hot Plug PCI Core

version: 0.5

Dec 27 17:13:15 frycek kernel: vesafb: probe of vesafb0 failed with

error -6

Dec 27 17:13:15 frycek kernel: vga16fb: initializing

Dec 27 17:13:15 frycek kernel: vga16fb: mapped to 0xc00a0000
Dec 27 17:13:15 frycek kernel: fb0: VGA16 VGA frame buffer device

Dec 27 17:13:15 frycek kernel: isapnp: Scanning for PnP cards...

Dec 27 17:13:15 frycek kernel: isapnp: Card 'Analog Devices AD1816A'

Dec 27 17:13:15 frycek kernel: isapnp: 1 Plug & Play card detected total

Dec 27 17:13:15 frycek kernel: HDLC line discipline: version

$Revision: 4.8 $, maxframe=4096

Dec 27 17:13:15 frycek kernel: N_HDLC line discipline registered.

Dec 27 17:13:15 frycek kernel: Linux agpgart interface v0.100 (c)

Dave Jones

Dec 27 17:13:15 frycek kernel: agpgart: Detected VIA Apollo MVP3 chipset

Dec 27 17:13:15 frycek kernel: agpgart: Maximum main memory to use

for agp memory: 27M

Dec 27 17:13:15 frycek kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Dec 27 17:13:15 frycek kernel: serio: i8042 AUX port at 0x60,0x64 irq 12

Dec 27 17:13:15 frycek kernel: serio: i8042 KBD port at 0x60,0x64 irq 1

Dec 27 17:13:15 frycek kernel: io scheduler noop registered

Dec 27 17:13:15 frycek kernel: divert: not allocating divert_blk for

non-ethernet device lo

Dec 27 17:13:15 frycek kernel: PPP generic driver version 2.4.2

Dec 27 17:13:15 frycek kernel: PPP Deflate Compression module registered

Dec 27 17:13:15 frycek kernel: PPP BSD Compression module registered

Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 24

Dec 27 17:13:15 frycek kernel: Uniform Multi-Platform E-IDE driver

Revision: 7.00alpha2

Dec 27 17:13:15 frycek kernel: ide: Assuming 33MHz system bus speed

for PIO modes; override with idebus=xx

Dec 27 17:13:15 frycek kernel: VP_IDE: IDE controller at PCI slot

0000:00:07.1
Dec 27 17:13:15 frycek kernel: VP_IDE: chipset revision 6

Dec 27 17:13:15 frycek kernel: VP_IDE: not 100%% native mode: will

probe irqs later

Dec 27 17:13:15 frycek kernel: VP_IDE: VIA vt82c586b (rev 41) IDE

UDMA33 controller on pci0000:00:07.1
Dec 27 17:13:15 frycek kernel: ide0: BM-DMA at 0xe400-0xe407,

BIOS settings: hda:DMA, hdb:DMA

Dec 27 17:13:15 frycek kernel: ide1: BM-DMA at 0xe408-0xe40f,

BIOS settings: hdc:DMA, hdd:DMA

Dec 27 17:13:15 frycek kernel: Probing IDE interface ide0...

Dec 27 17:13:15 frycek kernel: hda: ST320413A, ATA DISK drive

Dec 27 17:13:15 frycek kernel: hdb: ST340810A, ATA DISK drive

Dec 27 17:13:15 frycek kernel: elevator: using noop as default io

scheduler

Dec 27 17:13:15 frycek kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

Dec 27 17:13:15 frycek kernel: Probing IDE interface ide1...

Dec 27 17:13:15 frycek kernel: ide1: Wait for ready failed before

probe !

Dec 27 17:13:15 frycek kernel: hdc: ATAPI CD-ROM DRIVE 32X MAXIMUM,

ATAPI CD/DVD-ROM drive

Dec 27 17:13:15 frycek kernel: ide1 at 0x170-0x177,0x376 on irq 15

Dec 27 17:13:15 frycek kernel: Probing IDE interface ide2...

Dec 27 17:13:15 frycek kernel: ide2: Wait for ready failed before

probe !

Dec 27 17:13:15 frycek kernel: Probing IDE interface ide3...

Dec 27 17:13:15 frycek kernel: ide3: Wait for ready failed before

probe !

Dec 27 17:13:15 frycek kernel: Probing IDE interface ide4...

Dec 27 17:13:15 frycek kernel: ide4: Wait for ready failed before

probe !

Dec 27 17:13:15 frycek kernel: Probing IDE interface ide5...

Dec 27 17:13:15 frycek kernel: ide5: Wait for ready failed before

probe !

Dec 27 17:13:15 frycek kernel: hda: max request size: 128KiB

Dec 27 17:13:15 frycek kernel: hda: 39102336 sectors (20020 MB)

w/512KiB Cache, CHS=38792/16/63, UDMA(33)

Dec 27 17:13:15 frycek kernel: hda: cache flushes not supported

Dec 27 17:13:15 frycek kernel: /dev/ide/host0/bus0/target0/lun0: p1

p2 p3 p4

Dec 27 17:13:15 frycek kernel: hdb: max request size: 128KiB

Dec 27 17:13:15 frycek kernel: hdb: Host Protected Area detected.

Dec 27 17:13:15 frycek kernel: ^Icurrent capacity is 66055248

sectors (33820 MB)

Dec 27 17:13:15 frycek kernel: ^Inative capacity is 78165360

sectors (40020 MB)

Dec 27 17:13:15 frycek kernel: hdb: Host Protected Area disabled.

Dec 27 17:13:15 frycek kernel: hdb: 78165360 sectors (40020 MB)

w/2048KiB Cache, CHS=65535/16/63, UDMA(33)

Dec 27 17:13:15 frycek kernel: hdb: cache flushes not supported

Dec 27 17:13:15 frycek kernel: /dev/ide/host0/bus0/target1/lun0: p1

p2 p3 p4 < p5 p6 p7 p8 >

Dec 27 17:13:15 frycek kernel: hdc: ATAPI 27X CD-ROM drive, 120kB Cache

Dec 27 17:13:15 frycek kernel: Uniform CD-ROM driver Revision: 3.20

Dec 27 17:13:15 frycek kernel: mice: PS/2 mouse device common for

all mice

Dec 27 17:13:15 frycek kernel: input: AT Translated Set 2 keyboard

on isa0060/serio0

Dec 27 17:13:15 frycek kernel: input: PS/2 Generic Mouse on

isa0060/serio1

Dec 27 17:13:15 frycek kernel: input: PC Speaker

Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 2

Dec 27 17:13:15 frycek kernel: IP: routing cache hash table of 512

buckets, 4Kbytes

Dec 27 17:13:15 frycek kernel: TCP: Hash tables configured

(established 4096 bind 8192)

Dec 27 17:13:15 frycek kernel: ip_tables: (C) 2000-2002 Netfilter

core team

Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 1

Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 10

Dec 27 17:13:15 frycek kernel: IPv6 over IPv4 tunneling driver

Dec 27 17:13:15 frycek kernel: divert: not allocating divert_blk for

non-ethernet device sit0

Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 17

Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 15

Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 8

Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 20

Dec 27 17:13:15 frycek kernel: EXT3-fs: mounted filesystem with

ordered data mode.

Dec 27 17:13:15 frycek kernel: VFS: Mounted root (ext3 filesystem)

readonly.

Dec 27 17:13:15 frycek kernel: kjournald starting. Commit interval

5 seconds

Dec 27 17:13:15 frycek kernel: Mounted devfs on /dev

Dec 27 17:13:15 frycek kernel: Freeing unused kernel memory: 156k freed

Dec 27 17:13:15 frycek kernel: Real Time Clock Driver v1.12

Dec 27 17:13:15 frycek kernel: EXT3 FS on hdb1, internal journal

Dec 27 17:13:15 frycek kernel: Adding 122968k swap on /dev/hdb2.

Priority:-1 extents:1

Dec 27 17:13:15 frycek kernel: EXT3 FS on hdb1, internal journal

Dec 27 17:13:15 frycek kernel: kjournald starting. Commit interval

5 seconds

Dec 27 17:13:15 frycek kernel: EXT3 FS on hda4, internal journal

Dec 27 17:13:15 frycek kernel: EXT3-fs: mounted filesystem with

ordered data mode.

Dec 27 17:13:15 frycek kernel: kjournald starting. Commit interval

5 seconds

Dec 27 17:13:15 frycek kernel: EXT3 FS on hda2, internal journal

Dec 27 17:13:15 frycek kernel: EXT3-fs: mounted filesystem with

ordered data mode.

Dec 27 17:13:15 frycek kernel: kjournald starting. Commit interval

5 seconds

Dec 27 17:13:15 frycek kernel: EXT3 FS on hda3, internal journal

Dec 27 17:13:15 frycek kernel: EXT3-fs: mounted filesystem with

ordered data mode.

Dec 27 17:13:15 frycek kernel: NTFS volume version 3.0.

Dec 27 17:13:15 frycek kernel: ReiserFS: hdb5: found reiserfs format

"3.6" with standard journal

Dec 27 17:13:15 frycek kernel: ReiserFS: hdb5: using ordered data mode

Dec 27 17:13:15 frycek kernel: ReiserFS: hdb5: journal params:

device hdb5, size 8192, journal first block 18, max trans len 1024,

max batch 900, max commit age 30, max trans age 30

Dec 27 17:13:15 frycek kernel: ReiserFS: hdb5: checking transaction

log (hdb5)

Dec 27 17:13:15 frycek kernel: ReiserFS: hdb5: Using r5 hash to sort

names

Dec 27 17:13:15 frycek kernel: kjournald starting. Commit interval

5 seconds

Dec 27 17:13:15 frycek kernel: EXT3 FS on hdb6, internal journal

Dec 27 17:13:15 frycek kernel: EXT3-fs: mounted filesystem with

ordered data mode.

Dec 27 17:13:15 frycek kernel: kjournald starting. Commit interval

5 seconds

Dec 27 17:13:15 frycek kernel: EXT3 FS on hdb7, internal journal

Dec 27 17:13:15 frycek kernel: EXT3-fs: mounted filesystem with

ordered data mode.

Dec 27 17:13:15 frycek kernel: EXT3 FS on hdb1, internal journal

Dec 27 17:13:15 frycek kernel: Disabled Privacy Extensions on device

c03d1ac0(lo)

-------------------------


Fryderyk.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:09    [from the cache]
©2003-2011 Jasper Spaans