Messages in this thread | | | From | "Alan J. Wylie" <> | Date | Mon, 13 Dec 2004 10:50:05 +0000 | Subject | Re: 2.4.29-pre1 OOPS early in boot with Intel ICH5 SATA controller |
| |
On Sat, 11 Dec 2004 13:52:12 -0500, Jeff Garzik <jgarzik@pobox.com> said:
> If you are getting an oops there, it looks like your ata_piix driver > is mismatched from the libata core. Did you compile them both at > the same time, from the same source kernel?
> The assembly code above is where function ata_host_add in > libata-core.c calls "ap->ops->port_start", which definitely exists > in ata_piix.c.
I've just reproduced the boot, taking care and double checking every step, this time with 2.4.29-pre1-bk7
I get the pretty much same crash.
The same kernel with BIOS "Native Mode" set to BOTH works.
# cd tmp
# ls -l total 8 drwxr-xr-x 2 root root 4096 Dec 10 15:40 . drwxr-xr-x 15 root root 4096 Dec 10 16:25 ..
# tar xIf .../linux-2.4.28.tar.bz2
# cd linux-2.4.28/ # bzip2 -dc .../patch-2.4.29-pre1.bz2 | patch -p 1 --quiet # bzip2 -dc .../patch-2.4.29-pre1-bk7.bz2 | patch -p 1 --quiet
# cp .../.config . # make oldconfig
# sed -i '/^#export\tINSTALL_PATH=\/boot/s/#//' Makefile
# grep -v "^#" .config | cat -s
CONFIG_X86=y CONFIG_UID16=y
CONFIG_EXPERIMENTAL=y
CONFIG_MPENTIUMIII=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_HAS_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_F00F_WORKS_OK=y CONFIG_NOHIGHMEM=y CONFIG_X86_TSC=y
CONFIG_NET=y CONFIG_PCI=y CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y CONFIG_HOTPLUG=y
CONFIG_PCMCIA=y CONFIG_CARDBUS=y
CONFIG_SYSVIPC=y CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_PM=y CONFIG_APM=y CONFIG_APM_CPU_IDLE=y CONFIG_APM_RTC_IS_GMT=y
CONFIG_PNP=y
CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_RAID1=y CONFIG_BLK_DEV_LVM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40
CONFIG_SCSI_DEBUG_QUEUES=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SATA=y CONFIG_SCSI_ATA_PIIX=y
CONFIG_NETDEVICES=y
CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_PCNET=y CONFIG_NET_PCMCIA_RADIO=y CONFIG_PCMCIA_RAYCS=y
CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y CONFIG_SERIAL_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256
CONFIG_MOUSE=y CONFIG_PSMOUSE=y
CONFIG_RTC=y
CONFIG_EXT3_FS=y CONFIG_JBD=y CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_PROC_FS=y CONFIG_DEVFS_FS=y CONFIG_DEVFS_MOUNT=y CONFIG_DEVPTS_FS=y CONFIG_EXT2_FS=y
CONFIG_MSDOS_PARTITION=y
CONFIG_VGA_CONSOLE=y
CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=0
# make dep && make clean && make
# make install
# date Mon Dec 13 10:15:00 GMT 2004
# ls -lrt /boot total 2588 ... -rw-r--r-- 1 root root 690354 Dec 13 10:14 vmlinuz -rw-r--r-- 1 root root 359525 Dec 13 10:14 System.map
[reboot]
[BIOS setup - Native Mode Operation AUTO ]
[OOPS]
PCI: Sharing IRQ 10 with 04:02.0 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bdma 0x18E0 irq 14 ata1: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata1: dev 0 configured for UDMA/133
ksymoops 2.4.9 on i686 2.4.29-pre1-bk5. Options used -V (default) -K (specified) -L (specified) -O (specified) -m /boot/System.map (specified)
Unable to handle kernel NULL pointer dereference at virtual address 00000050 c01afb37 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<c01afb37>] Not tainted Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00010246 eax: 00000000 ebx: f7e6b878 ecx: 00000000 edx: 00000002 esi: f7e6b800 edi: f7e6ba20 ebp: f7e6ba20 esp: c19b7f18 ds: 0018 es: 0018 ss: 0018 Process swapper (pid: 1, stackpage=c19b7000) Stack: f7e6b878 f7e6b800 c19bfa00 f7e6ba20 00000000 c19bfa00 00000000 c19bfa1c c01afcc0 f7e6ba20 c19bfa00 00000000 c0208ccb 00000286 000003f6 000018e0 0000000e c19b0800 00000000 f7e6ba20 00000001 c0105000 c0226ce0 c01afda2 Call Trace: [<c01afcc0>] [<c0105000>] [<c01afda2>] [<c01a0ab5>] [<c01b536c>] [<c01b53dc>] [<c0105000>] [<c010507b>] [<c0105000>] [<c010569e>] [<c0105070>] Code: ff 50 50 89 da 85 c0 75 12 8b 5c 24 14 89 d0 8b 74 24 18 8b
>>EIP; c01afb37 <ata_host_add+57/80> <=====
Trace; c01afcc0 <ata_device_add+160/200> Trace; c0105000 <_stext+0/0> Trace; c01afda2 <ata_scsi_detect+42/60> Trace; c01a0ab5 <scsi_register_host+2e5/2f0> Trace; c01b536c <pci_announce_device+6c/80> Trace; c01b53dc <pci_register_driver+5c/60> Trace; c0105000 <_stext+0/0> Trace; c010507b <init+b/100> Trace; c0105000 <_stext+0/0> Trace; c010569e <arch_kernel_thread+2e/40> Trace; c0105070 <init+0/100>
Code; c01afb37 <ata_host_add+57/80> 00000000 <_EIP>: Code; c01afb37 <ata_host_add+57/80> <===== 0: ff 50 50 call *0x50(%eax) <===== Code; c01afb3a <ata_host_add+5a/80> 3: 89 da mov %ebx,%edx Code; c01afb3c <ata_host_add+5c/80> 5: 85 c0 test %eax,%eax Code; c01afb3e <ata_host_add+5e/80> 7: 75 12 jne 1b <_EIP+0x1b> Code; c01afb40 <ata_host_add+60/80> 9: 8b 5c 24 14 mov 0x14(%esp),%ebx Code; c01afb44 <ata_host_add+64/80> d: 89 d0 mov %edx,%eax Code; c01afb46 <ata_host_add+66/80> f: 8b 74 24 18 mov 0x18(%esp),%esi Code; c01afb4a <ata_host_add+6a/80> 13: 8b 00 mov (%eax),%eax
<0>Kernel panic: Attempted to kill init!
-- Alan J. Wylie http://www.wylie.me.uk/ "Perfection [in design] is achieved not when there is nothing left to add, but rather when there is nothing left to take away." -- Antoine de Saint-Exupery - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |