lkml.org 
[lkml]   [2004]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 2/6] mv643xx_eth: replace fixed-count spin delays
This patch removes spin delays (count to 1000000, ugh) and instead waits
with udelay or msleep for hardware flags to change.

It also adds a spinlock to protect access to the MV64340_ETH_SMI_REG,
which is shared across ports.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>

Index: linux-2.5-marvell-submit/drivers/net/mv643xx_eth.c
===================================================================
--- linux-2.5-marvell-submit.orig/drivers/net/mv643xx_eth.c 2004-12-13 14:29:54.292321344 -0700
+++ linux-2.5-marvell-submit/drivers/net/mv643xx_eth.c 2004-12-13 14:29:55.829024727 -0700
@@ -10,6 +10,9 @@
*
* Copyright (C) 2003 Ralf Baechle <ralf@linux-mips.org>
*
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ * Dale Farnsworth <dale@farnsworth.org>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
@@ -28,10 +31,12 @@
#include <linux/tcp.h>
#include <linux/etherdevice.h>
#include <linux/bitops.h>
+#include <linux/delay.h>
#include <asm/io.h>
#include <asm/types.h>
#include <asm/pgtable.h>
#include <asm/system.h>
+#include <asm/delay.h>
#include "mv643xx_eth.h"

/*
@@ -66,6 +71,8 @@
unsigned char prom_mac_addr_base[6];
unsigned long mv64340_sram_base;

+static spinlock_t mv64340_eth_phy_lock = SPIN_LOCK_UNLOCKED;
+
/*
* Changes MTU (maximum transfer unit) of the gigabit ethenret port
*
@@ -770,6 +777,7 @@
unsigned int port_num = mp->port_num;
u32 phy_reg_data;
unsigned int size;
+ int i;

/* Stop RX Queues */
MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num),
@@ -864,12 +872,16 @@
(MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(port_num))
& 0xfff1ffff));

- /* Check Link status on phy */
- eth_port_read_smi_reg(port_num, 1, &phy_reg_data);
- if (!(phy_reg_data & 0x20))
- netif_stop_queue(dev);
- else
- netif_start_queue(dev);
+ /* wait up to 1 second for link to come up */
+ for (i=0; i<10; i++) {
+ eth_port_read_smi_reg(port_num, 1, &phy_reg_data);
+ if (phy_reg_data & 0x20) {
+ netif_start_queue(dev);
+ return 0;
+ }
+ msleep(100); /* sleep 1/10 second */
+ }
+ netif_stop_queue(dev);

return 0;
}
@@ -1549,9 +1561,6 @@
#define ETH_ENABLE_TX_QUEUE(eth_port) \
MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), 1)

-#define LINK_UP_TIMEOUT 100000
-#define PHY_BUSY_TIMEOUT 10000000
-
/* locals */

/* PHY routines */
@@ -1888,38 +1897,26 @@
* ethernet_phy_reset - Reset Ethernet port PHY.
*
* DESCRIPTION:
- * This routine utilize the SMI interface to reset the ethernet port PHY.
- * The routine waits until the link is up again or link up is timeout.
+ * This routine utilizes the SMI interface to reset the ethernet port PHY.
*
* INPUT:
* unsigned int eth_port_num Ethernet Port number.
*
* OUTPUT:
- * The ethernet port PHY renew its link.
+ * The PHY is reset.
*
* RETURN:
* None.
*
*/
-static int ethernet_phy_reset(unsigned int eth_port_num)
+static void ethernet_phy_reset(unsigned int eth_port_num)
{
- unsigned int time_out = 50;
unsigned int phy_reg_data;

/* Reset the PHY */
eth_port_read_smi_reg(eth_port_num, 0, &phy_reg_data);
phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */
eth_port_write_smi_reg(eth_port_num, 0, phy_reg_data);
-
- /* Poll on the PHY LINK */
- do {
- eth_port_read_smi_reg(eth_port_num, 1, &phy_reg_data);
-
- if (time_out-- == 0)
- return 0;
- } while (!(phy_reg_data & 0x20));
-
- return 1;
}

/*
@@ -1940,62 +1937,48 @@
* None.
*
*/
-static void eth_port_reset(unsigned int eth_port_num)
+static void eth_port_reset(unsigned int port_num)
{
unsigned int reg_data;

/* Stop Tx port activity. Check port Tx activity. */
- reg_data =
- MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port_num));
+ reg_data = MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num));

if (reg_data & 0xFF) {
/* Issue stop command for active channels only */
- MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG
- (eth_port_num), (reg_data << 8));
+ MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num),
+ (reg_data << 8));

/* Wait for all Tx activity to terminate. */
- do {
- /* Check port cause register that all Tx queues are stopped */
- reg_data =
- MV_READ
- (MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG
- (eth_port_num));
- }
- while (reg_data & 0xFF);
+ /* Check port cause register that all Tx queues are stopped */
+ while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num))
+ & 0xFF)
+ udelay(10);
}

/* Stop Rx port activity. Check port Rx activity. */
- reg_data =
- MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG
- (eth_port_num));
+ reg_data = MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num));

if (reg_data & 0xFF) {
/* Issue stop command for active channels only */
- MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG
- (eth_port_num), (reg_data << 8));
+ MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num),
+ (reg_data << 8));

/* Wait for all Rx activity to terminate. */
- do {
- /* Check port cause register that all Rx queues are stopped */
- reg_data =
- MV_READ
- (MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG
- (eth_port_num));
- }
- while (reg_data & 0xFF);
+ /* Check port cause register that all Rx queues are stopped */
+ while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num))
+ & 0xFF)
+ udelay(10);
}


/* Clear all MIB counters */
- eth_clear_mib_counters(eth_port_num);
+ eth_clear_mib_counters(port_num);

/* Reset the Enable bit in the Configuration Register */
- reg_data =
- MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num));
+ reg_data = MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(port_num));
reg_data &= ~ETH_SERIAL_PORT_ENABLE;
- MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(eth_port_num), reg_data);
-
- return;
+ MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(port_num), reg_data);
}

/*
@@ -2054,6 +2037,8 @@
return eth_config_reg;
}

+#define PHY_WAIT_ITERATIONS 1000 /* 1000 iterations * 10uS = 10mS max */
+

/*
* eth_port_read_smi_reg - Read PHY registers
@@ -2063,7 +2048,7 @@
* order to perform PHY register read.
*
* INPUT:
- * unsigned int eth_port_num Ethernet Port number.
+ * unsigned int port_num Ethernet Port number.
* unsigned int phy_reg PHY register address offset.
* unsigned int *value Register value buffer.
*
@@ -2075,41 +2060,41 @@
* true otherwise.
*
*/
-static int eth_port_read_smi_reg(unsigned int eth_port_num,
+static void eth_port_read_smi_reg(unsigned int port_num,
unsigned int phy_reg, unsigned int *value)
{
- int phy_addr = ethernet_phy_get(eth_port_num);
- unsigned int time_out = PHY_BUSY_TIMEOUT;
- unsigned int reg_value;
-
- /* first check that it is not busy */
- do {
- reg_value = MV_READ(MV64340_ETH_SMI_REG);
- if (time_out-- == 0)
- return 0;
- } while (reg_value & ETH_SMI_BUSY);
+ int phy_addr = ethernet_phy_get(port_num);
+ unsigned long flags;
+ int i;
+
+ /* the SMI register is a shared resource */
+ spin_lock_irqsave(&mv64340_eth_phy_lock, flags);

- /* not busy */
+ /* wait for the SMI register to become available */
+ for (i=0; MV_READ(MV64340_ETH_SMI_REG) & ETH_SMI_BUSY; i++) {
+ if (i == PHY_WAIT_ITERATIONS) {
+ printk("mv64340 PHY busy timeout, port %d\n", port_num);
+ goto out;
+ }
+ udelay(10);
+ }

MV_WRITE(MV64340_ETH_SMI_REG,
(phy_addr << 16) | (phy_reg << 21) | ETH_SMI_OPCODE_READ);

- time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */
-
- do {
- reg_value = MV_READ(MV64340_ETH_SMI_REG);
- if (time_out-- == 0)
- return 0;
- } while (reg_value & ETH_SMI_READ_VALID);
-
- /* Wait for the data to update in the SMI register */
- for (time_out = 0; time_out < PHY_BUSY_TIMEOUT; time_out++);
-
- reg_value = MV_READ(MV64340_ETH_SMI_REG);
-
- *value = reg_value & 0xffff;
+ /* now wait for the data to be valid */
+ for (i=0; !(MV_READ(MV64340_ETH_SMI_REG) & ETH_SMI_READ_VALID); i++) {
+ if (i == PHY_WAIT_ITERATIONS) {
+ printk("mv64340 PHY read timeout, port %d\n", port_num);
+ goto out;
+ }
+ udelay(10);
+ }
+
+ *value = MV_READ(MV64340_ETH_SMI_REG) & 0xffff;

- return 1;
+out:
+ spin_unlock_irqrestore(&mv64340_eth_phy_lock, flags);
}

/*
@@ -2132,27 +2117,32 @@
* true otherwise.
*
*/
-static int eth_port_write_smi_reg(unsigned int eth_port_num,
+static void eth_port_write_smi_reg(unsigned int eth_port_num,
unsigned int phy_reg, unsigned int value)
{
- unsigned int time_out = PHY_BUSY_TIMEOUT;
- unsigned int reg_value;
int phy_addr;
+ int i;
+ unsigned long flags;

phy_addr = ethernet_phy_get(eth_port_num);

- /* first check that it is not busy */
- do {
- reg_value = MV_READ(MV64340_ETH_SMI_REG);
- if (time_out-- == 0)
- return 0;
- } while (reg_value & ETH_SMI_BUSY);
+ /* the SMI register is a shared resource */
+ spin_lock_irqsave(&mv64340_eth_phy_lock, flags);
+
+ /* wait for the SMI register to become available */
+ for (i=0; MV_READ(MV64340_ETH_SMI_REG) & ETH_SMI_BUSY; i++) {
+ if (i == PHY_WAIT_ITERATIONS) {
+ printk("mv64340 PHY busy timeout, port %d\n",
+ eth_port_num);
+ goto out;
+ }
+ udelay(10);
+ }

- /* not busy */
MV_WRITE(MV64340_ETH_SMI_REG, (phy_addr << 16) | (phy_reg << 21) |
ETH_SMI_OPCODE_WRITE | (value & 0xffff));
-
- return 1;
+out:
+ spin_unlock_irqrestore(&mv64340_eth_phy_lock, flags);
}

/*
Index: linux-2.5-marvell-submit/drivers/net/mv643xx_eth.h
===================================================================
--- linux-2.5-marvell-submit.orig/drivers/net/mv643xx_eth.h 2004-12-13 14:29:50.487055840 -0700
+++ linux-2.5-marvell-submit/drivers/net/mv643xx_eth.h 2004-12-13 14:29:55.829024727 -0700
@@ -576,13 +576,13 @@
unsigned char *p_addr);

/* PHY and MIB routines */
-static int ethernet_phy_reset(unsigned int eth_port_num);
+static void ethernet_phy_reset(unsigned int eth_port_num);

-static int eth_port_write_smi_reg(unsigned int eth_port_num,
+static void eth_port_write_smi_reg(unsigned int eth_port_num,
unsigned int phy_reg,
unsigned int value);

-static int eth_port_read_smi_reg(unsigned int eth_port_num,
+static void eth_port_read_smi_reg(unsigned int eth_port_num,
unsigned int phy_reg,
unsigned int *value);

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 14:08    [W:0.093 / U:1.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site