lkml.org 
[lkml]   [2004]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2.6] via-rhine: WOL band-aid
After I disabled legacy WOL (i.e. controlled by EEPROM rather than
driver) in 2.6.9, several people reported regressions. Legacy WOL had
worked for them, but now it didn't anymore. The Right Way (TM) to fix
this will get the driver to set up working WOL for all hardware, but a
simpler solution will have to do for the time being: If a user requests
magic packet WOL, the driver re-enables legacy WOL. Yeah, I know it's
cheating.

This version applies against -mm. I suggest to put it there for testing
and into 2.6.11 if feedback is good.

Thanks to Pavel Ruzicka for testing.

Roger

Signed-off-by: Roger Luethi <rl@hellgate.ch>

--- 2.6-mm/drivers/net/via-rhine.c.orig 2004-11-30 23:28:46.663676720 +0100
+++ 2.6-mm/drivers/net/via-rhine.c 2004-11-30 23:32:00.928144032 +0100
@@ -654,7 +654,7 @@ static void __devinit rhine_reload_eepro

/* Turn off EEPROM-controlled wake-up (magic packet) */
if (rp->quirks & rqWOL)
- iowrite8(ioread8(ioaddr + ConfigA) & 0xFE, ioaddr + ConfigA);
+ iowrite8(ioread8(ioaddr + ConfigA) & 0xFC, ioaddr + ConfigA);

}

@@ -1905,8 +1905,14 @@ static void rhine_shutdown (struct devic
if (rp->quirks & rq6patterns)
iowrite8(0x04, ioaddr + 0xA7);

- if (rp->wolopts & WAKE_MAGIC)
+ if (rp->wolopts & WAKE_MAGIC) {
iowrite8(WOLmagic, ioaddr + WOLcrSet);
+ /*
+ * Turn EEPROM-controlled wake-up back on -- some hardware may
+ * not cooperate otherwise.
+ */
+ iowrite8(ioread8(ioaddr + ConfigA) | 0x03, ioaddr + ConfigA);
+ }

if (rp->wolopts & (WAKE_BCAST|WAKE_MCAST))
iowrite8(WOLbmcast, ioaddr + WOLcgSet);
@@ -1917,9 +1923,11 @@ static void rhine_shutdown (struct devic
if (rp->wolopts & WAKE_UCAST)
iowrite8(WOLucast, ioaddr + WOLcrSet);

- /* Enable legacy WOL (for old motherboards) */
- iowrite8(0x01, ioaddr + PwcfgSet);
- iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW);
+ if (rp->wolopts) {
+ /* Enable legacy WOL (for old motherboards) */
+ iowrite8(0x01, ioaddr + PwcfgSet);
+ iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW);
+ }

/* Hit power state D3 (sleep) */
iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 14:08    [W:0.038 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site