lkml.org 
[lkml]   [2004]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [linux-usb-devel] [PATCH] Ohci-hcd: fix endless loop (second take)
From
Date
On Mon, 2004-11-29 at 23:34 +0100, Colin Leroy wrote:
> On 30 Nov 2004 at 09h11, Benjamin Herrenschmidt wrote:
>
> Hi,
>
> > Hrm... there is some problem in communication here. I asked you which
> > controller out of the 3 OHCIs you have in this machine is the culprit,
> > you give me a list of all of them but without PCI IDs ... From the
> > archive, I think it was USB bus #4 no ? not sure which of these
> > controllers it matches.
> >
> > The iBook G4 has actually 3 "Apple" OHCI's in KeyLargo/Intrepid but
> > with 2 of them disabled by the firmware (not wired) plus one NEC USB2
> > controller (which contains 1 EHCI and 2 OHCIs) on the PCI bus. The
> > code managing their sleep process is very different.
>
> Sorry, i was away and had a problem of /proc/bus/usb being empty. As my
> link was on the wireless stick I couldn't reload usb modules. The
> culprit is usb 4-1, I think it would be this one (as the stick is bus
> 004 device 001):

Ok, this is a perfectly normal "out of the schelves" NEC chip, no
special "Mac" thing in there, it just use normal PCI PM...

It could be one of the devices not properly dealing with beeing
suspended, or it could be some delay needing to be increased here or
there in the resume process, difficult to say at this point.

Ben.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:08    [W:0.030 / U:22.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site