lkml.org 
[lkml]   [2004]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
Subject[bug]Broken driver for a SK nic
From
Hello
I bought a new box with a 64bits proc (Athlon) 512Mo of RAM and so on
I use a 2.6.9rc1 (the most recent I found (in a mag) without ANY internet
connection)under sourcemage
So my nic is:

#dmesg | grep eth0
eth0: Yukon Gigabit Ethernet 10/10/1000Base-T Adaptater

I must use the sk98lin module which is integrated to the kernel well easy.
I recompile the kernel and I modprobe the module:

#modprobe sk98lin
ACPI: PCI interrupt 0000:02:00.0[A] ->GSI 11 (level, low) ->IRQ11
ACPI: PCI interrupt 0000:02:00.0[A] ->GSI 11 (level, low) ->IRQ11
eth0: --ERROR--
Class: internal software error
Nr: 0x1ae
Msg: General: Driver release date not initialized
eth0: --ERROR--
Class: internal software error
Nr: 0x1ae
Msg: General: Driver release date not initialized
eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adaptater
PrefPort:A RlmtMode: check Link State
dhcpcd[2875]: dhcpStart: retrying MAC address request (returned
00:00:00:00:00:00)
eth0: network connection is up #là gros sourire :D
speed:100
autonegotiation: yes
duplex mode: full
flowctrl:symmetric
irq moderation: disabled
scatter-gather: enabled
ASSERT net/ipv4/netfilter/ip_nat_helper.c:428 &ip_nat_lock write locked
I've got this and the pc freeze does anyone get a clue about what goes
wrong?
Thx


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:08    [W:0.022 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site