Messages in this thread Patch in this message | | | Date | Wed, 27 Oct 2004 22:50:28 +0200 | From | Adrian Bunk <> | Subject | [2.6 patch] remove outdated OSS Changelogs |
| |
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
There's not much value in shipping Changelogs that weren't updated since at least 2.4.0 .
diffstat output: Documentation/sound/oss/ChangeLog.awe | 230 ------------------- Documentation/sound/oss/ChangeLog.multisound | 213 ----------------- 2 files changed, 443 deletions(-)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
- --- linux-2.6.10-rc1-mm1-full/Documentation/sound/oss/ChangeLog.multisound 2004-10-18 23:53:45.000000000 +0200 +++ /dev/null 2004-08-23 02:01:39.000000000 +0200 @@ -1,213 +0,0 @@ - -1998-12-04 Andrew T. Veliath <andrewtv@usa.net> - - - - * Update version to 0.8.2.2 - - - - * Add msndreset program to shell archive. - - - -1998-11-11 Andrew T. Veliath <andrewv@usa.net> - - - - * msnd_pinnacle.c (mixer_ioctl): Add a mixer ioctl for - - SOUND_MIXER_PRIVATE1 which does a full reset on the card. - - (mixer_set): Move line in recording source to input monitor, aux - - input level added, some mixer fixes. - - - -1998-09-10 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.8.2 - - - - * Add SNDCTL_DSP_GETOSPACE and SNDCTL_DSP_GETISPACE ioctls. - - - -1998-09-09 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.8.1 - - - - * msnd_pinnacle.c: Fix resetting of default audio parameters. Turn - - flush code from dsp_halt into dsp_write_flush, and use that for - - SNDCTL_DSP_SYNC. - - - -1998-09-07 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.8.0 - - - - * Provide separate signal parameters for play and record. - - - - * Cleanups to locking and interrupt handling, change default - - fifosize to 128kB. - - - - * Update version to 0.7.15 - - - - * Interprocess full-duplex support (ie `cat /dev/dsp > /dev/dsp'). - - - - * More mutex sections for read and write fifos (read + write locks - - added). - - - -1998-09-05 Andrew Veliath <andrewtv@usa.net> - - - - * msnd_pinnacle.c: (chk_send_dsp_cmd) Do full DSP reset upon DSP - - timeout (when not in interrupt; maintains mixer settings). Fixes - - to flushing and IRQ ref counting. Rewrote queuing for smoother - - playback and fixed initial playback cutoff problem. - - - -1998-09-03 Andrew Veliath <andrewtv@usa.net> - - - - * Replaced packed structure accesses with standard C equivalents. - - - -1998-09-01 Andrew Veliath <andrewtv@usa.net> - - - - * msnd_pinnacle.c: Add non-PnP configuration to driver code, which - - will facilitate compiled-in operation. - - - -1998-08-29 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.7.6 - - - - * msnd_pinnacle.c (dsp_ioctl): Add DSP_GETFMTS, change SAMPLESIZE - - to DSP_SETFMT. - - - - * Update version to 0.7.5 - - - - * Create pinnaclecfg.c and turn MultiSound doc into a shell - - archive with pinnaclecfg.c included. pinnaclecfg.c can - - now fully configure the card in non-PnP mode, including the - - joystick and IDE controller. Also add an isapnp conf - - example. - - - - * Reduce DSP reset timeout from 20000 to 100 - - - -1998-08-06 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.7.2 - - - - * After A/D calibration, do an explicit set to the line input, - - rather than using set_recsrc - - - -1998-07-20 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.7.1 - - - - * Add more OSS ioctls - - - -1998-07-19 Andrew Veliath <andrewtv@usa.net> - - - - * Update doc file - - - - * Bring back DIGITAL1 with digital parameter to msnd_pinnacle.c - - and CONFIG_MSNDPIN_DIGITAL. I'm not sure this actually works, - - since I find audio playback goes into a very speeded mode of - - operation, however it might be due to a lack of a digital - - source, which I don't have to test. - - - -1998-07-18 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.7.0 - - - - * Can now compile with Alan Cox' 2.0.34-modular-sound patch (so - - now it requires >= 2.1.106 or 2.0.34-ms) (note for 2.0.34-ms it - - is in the Experimental section) - - - - * More modularization, consolidation, also some MIDI hooks - - installed for future MIDI modules - - - - * Write flush - - - - * Change default speed, channels, bit size to OSS/Free defaults - - - -1998-06-02 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.5b - - - - * Fix version detection - - - - * Remove underflow and overflow resets (delay was too long) - - - - * Replace spinlocked bitops with atomic bit ops - - - -1998-05-27 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.5a - - - - * Better recovery from underflow or overflow conditions - - - - * Fix a deadlock condition with one thread reading and the other - - writing - - - -1998-05-26 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.5 - - - - * Separate reset queue functions for play and record - - - - * Add delays in dsp_halt - - - -1998-05-24 Andrew Veliath <andrewtv@usa.net> - - - - * Add a check for Linux >= 2.1.95 - - - - * Remove DIGITAL1 input until I figure out how to make it work - - - - * Add HAVE_DSPCODEH which when not defined will load firmware from - - files using mod_firmware_load, then release memory after they - - are uploaded (requires reorganized OSS). - - - -1998-05-22 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.4c - - - - * Hopefully fix the mixer volume problem - - - -1998-05-19 Andrew Veliath <andrewtv@usa.net> - - - - * Add __initfuncs and __initdatas to reduce resident code size - - - - * Move bunch of code around, remove some protos - - - - * Integrate preliminary changes for Alan Cox's OSS reorganization - - for non-OSS drivers to coexist with OSS devices on the same - - major. To compile standalone, must now define STANDALONE. - - - -1998-05-16 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.4b - - - - * Integrated older card support into a unified driver, tested on a - - MultiSound Classic c/o Kendrick Vargas. - - - -1998-05-15 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.4 - - - - * Fix read/write return values - - - -1998-05-13 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.3 - - - - * Stop play gracefully - - - - * Add busy flag - - - - * Add major and calibrate_signal module parameters - - - - * Add ADC calibration - - - - * Add some OSS compatibility ioctls - - - - * Add mixer record selection - - - - * Add O_NONBLOCK support, separate read/write wait queues - - - - * Add sample bit size ioctl, expanded sample rate ioctl - - - - * Playback suspension now resumes - - - - * Use signal_pending after interruptible_sleep_on - - - - * Add recording, change ints to bit flags - - - -1998-05-11 Andrew Veliath <andrewtv@usa.net> - - - - * Update version to 0.2 - - - - * Add preliminary playback support - - - - * Use new Turtle Beach DSP code \ No newline at end of file - --- linux-2.6.10-rc1-mm1-full/Documentation/sound/oss/ChangeLog.awe 2004-10-18 23:55:36.000000000 +0200 +++ /dev/null 2004-08-23 02:01:39.000000000 +0200 @@ -1,230 +0,0 @@ - -ver.0.4.3p4 - - - Bug fix for invalid memory detection when initialized twice - - - Add sample sharing function - works together with awesfx-0.4.3p3 - - - Add AWE_PROBE_DATA for probing sample id - - - -ver.0.4.3p3 - - - Replace memset to MEMSET (for FreeBSD) - - - Add PAN_EXCHANGE switch - - - -ver.0.4.3p2 - - - MIDI emulation device is added - - - Controls volume and filter targets - - - Include chorus/reverb/equalizer values in MISC_MODE - - - -ver.0.4.3p1 - - - Change the volume calculation method - - - Support for Tom Lees' PnP driver (v0.3) - - - -ver.0.4.2d - - - Support for OSS/Free 3.8 on 2.0 kernels. - - - Support for Linux PnP driver - - - Support for module (for recent 2.1 kernels and RH5.0) - - - Support for FreeBSD-3.0 system - - - -ver.0.4.2c - - - Add a mode to enable drum channel toggle via bank number - - change. - - - -ver.0.4.2b - - - Clear voice position after note on - - - Change nrvoices according to the current playing mode - - - -ver.0.4.2a - - - Fix a bug in pitch calculation with scale parameter - - - Change default chorus & reverb modes - - - -ver.0.4.2 - - - Use indirect voice allocation mode; used as default mode - - - Add preset mapping - - - Free buffers when resetting samples - - - Set default preset/bank/drumset as variable - - - Fix a bug in exclusive note-off - - - Add channel reset control macro - - - Change modwheel sensitivity as variable - - - Add lock option in open_patch - - - Add channel priority mode macro, and disable it as default - - - Add unset effect macro - - - Add user defined chorus/reverb modes - - - Do not initialize effect parameters when allocating voices - - - Accept realtime filter-Q parameter change - - - Check value range of set/add effects - - - Change drum flags automatically when receiving bank #128 - - - -ver.0.4.1 development versions - - - -ver.0.4.0c - - - Fix kernel oops when setting AWE_FX_ATTEN - - - -ver.0.4.0b - - - Do not kill_note in start_note when velocity is zero - - - -ver.0.4.0a - - - Fix a bug in channel pressure effects - - - -ver.0.4.0 - - - Support dynamic buffer allocation - - - Add functions to open/close/unload a patch - - - Change from pointer to integer index in voice/sample lists - - - Support for Linux/Alpha-AXP - - - Fix for FreeBSD - - - Add sostenuto control - - - Add midi channel priority - - - Fix a bug in all notes off control - - - Use AWE_DEFAULT_MEMSIZE always if defined - - - Fix a bug in awe_reset causes seg fault when no DRAM onboard - - - Use awe_mem_start variable instead of constant - - - -ver.0.3.3c - - - Fix IOCTL_TO_USER for OSS-3.8 (on Linux-2.1.25) - - - Fix i/o macros for mixer controls - - - -ver.0.3.3b - - - Fix version number in awe_version.h - - - Fix a small bug in noteoff/release all - - - -ver.0.3.3a - - - Fix all notes/sounds off - - - Add layer effect control - - - Add misc mode controls; realtime pan, version number, etc. - - - Move gus bank control in misc mode control - - - Modify awe_operations for OSS3.8b5 - - - Fix installation script - - - -ver.0.3.3 - - - Add bass/treble control in Emu8000 chip - - - Add mixer device - - - Fix sustain on to value 127 - - - -ver.0.3.2 - - - Refuse linux-2.0.0 at installation - - - Move awe_voice.h to /usr/include/linux - - - -ver.0.3.1b (not released) - - - Rewrite chorus/reverb mode change functions - - - Rewrite awe_detect & awe_check_dram routines - - - -ver.0.3.1a - - - Fix a bug to reset voice counter in awe_reset - - - Fix voice balance on GUS mode - - - Make symlink on /usr/include/asm in install script - - - -ver.0.3.1 - - - Remove zero size arrays from awe_voice.h - - - Fix init_fm routine - - - Remove all samples except primary samples in REMOVE_LAST_SAMPLES - - - -ver.0.3.0a - - - Add AWE_NOTEOFF_ALL control - - - Remove AWE_INIT_ATTEN control - - - -ver.0.3.0 - - - Fix decay time table - - - Add exclusive sounds mode - - - Add capability to get current status - - - -ver.0.2.99e - - - Add #ifdef for all sounds/notes off controls. - - - Fix bugs on searching the default drumset/preset. - - - Fix usslite patch to modify the default Config.in. - - - -ver.0.2.99d - - - Fix bugs of attack/hold parameters - - - Fix attack & decay time table - - - -ver.0.2.99c - - - Change volume control messages (main & expression volume) - - to accesspt normal MIDI parameters in channel mode. - - - Use channel mode in SEQ2 controls. - - - -ver.0.2.99b - - - #ifdef patch manager functions (for OSS-3.7) - - - -ver.0.2.99a - - - Fix sustain bug - - - -ver.0.2.99 (0.3 beta) - - - Support multiple instruments - - - -ver.0.2.0c - - - Add copyright notice - - - FreeBSD 2.2-ALPHA integration - - - -ver.0.2.0b - - - Remove buffered reading appended in v0.2.0a - - - Remove SMAxW register check on writing - - - Support Linux 2.1.x kernel - - - Rewrite installation script - - - -ver.0.2.0a - - - Define SEQUENCER_C for tuning.h for FreeBSD system - - - Improvement of sample loading speed - - - Fix installation script - - - Add PnP driver functions for ISA PnP driver support - - - -ver.0.2.0 - - - Includes FreeBSD port - - - Can load GUS compatible patches - - - Change values of hardware control parameters for compatibility - - with GUS driver - - - Accept 8bit or unsigned wave data - - - Accept no blank loop data - - - Add sample mode flags in sample_info - - - -ver.0.1.6 - - - Add voice effects control - - - Fix awe_voice.h for word alignment - - - -ver.0.1.5c - - - Fix FM(OPL) playback problem - - - -ver.0.1.5b - - - Fix pitch calculation for fixed midi key - - - -ver.0.1.5a - - - Fix bugs in removing samples from linked list. - - - -ver.0.1.5 - - - Add checksum verification for sample uploading - - (not compatible from older sample_info structure) - - - Fix sample offset pointers to (actual value - 1) - - - Add sequencer command to initialize awe32 - - - -ver.0.1.4c - - - Fix card detection and memory check function to avoid system crash - - at booting - - - -ver.0.1.4b - - - Add release sustain mode - - - Initialize FM each time after loading samples - - - -ver.0.1.4a - - - Fix AWE card detection code - - - Correct FM initialize position - - - Add non-releasing mode on voice info - - - -ver.0.1.4 - - - Add AWE card and DRAM detection codes - - - Add FM initialization code - - - Modify volume control - - - Remove linear volume mode - - - Change memory management; not using malloc dynamically - - - Add remove-samples command - - - Use internal id implicitly at loading samples - - - -ver.0.1.3 - - - Fix a bug on patch uploading to RAM - - - -ver.0.1.2 - - - Divide to separated packages - - - Fix disagreed macro conditions - - - Fix unresolved function bugs - - - Integrate VoxWare and USS-Lite driver source (awe_voice.c) - - and remove awe_card.c - - - -ver.0.1.1 - - - Fix wrong sample numbers in sbktext - - - Fix txt2sfx bug - - - Fix pan parameter calculation - - - Append USS-Lite/Linux2.0 driver - -
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (GNU/Linux) iD8DBQFBgAoUmfzqmE8StAARArLLAKCzzpHPeLBv+nJPyuAOzbCgFPCOSACfbNJW 754rzyxZmZUkiokeUW9OLTQ= =SKUs -----END PGP SIGNATURE----- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |