lkml.org 
[lkml]   [2004]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectsata related hang with linux-2.6
Hello,

About once every three times i power-on my pc, it won't load the OS.
When the kernel is at the point of initializing my harddisk, it just
hangs with error message:

IRQ 10: Nobody cared!
(the following about 20 times and with different codes and messages for
the "...":)
[c01061da>] ...
Disabling IRQ# 10 ata1: dev 0 ATA, max UDMA/100, 4d88960 sectors.

I'm not able to capture it decently but perhaps i
could make a decent photo of it if necessary.
When this happens, i reset the system and then it boots just fine.

I have a Abit motherboard with Nforce2 chipset and Silicon Image
Sata(raid) controller (CONFIG_SCSI_SATA_SIL) I have a 20G ide disk
attached to the Sata controller via a "serillel" converter and Sata
cable. I don't think the serillel part is the problem since i found
someone else, he's on CC, with native sata who expierences the same error.

I now use the 2.6.9 kernel but the problem is also reproducable with
2.6.7, 2.6.8 and a few kernels i tried before these.

Is such a bug already known, and what can i do to help?

Ramon.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:07    [W:0.038 / U:2.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site