lkml.org 
[lkml]   [2004]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] ppc64: Update G5 thermal control driver
From
Date
Hi !

This patch updates the G5 thermal control driver, the main change
is support for the new "PowerMac7,3" type desktops including the
dual 2.5Ghz with liquid cooling.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Index: linux-work/drivers/macintosh/therm_pm72.c
===================================================================
--- linux-work.orig/drivers/macintosh/therm_pm72.c 2004-10-20 13:01:01.000000000 +1000
+++ linux-work/drivers/macintosh/therm_pm72.c 2004-10-22 11:08:15.059331488 +1000
@@ -46,6 +46,9 @@
* overtemp conditions so userland can take some policy
* decisions, like slewing down CPUs
* - Deal with fan and i2c failures in a better way
+ * - Maybe do a generic PID based on params used for
+ * U3 and Drives ?
+ * - Add RackMac3,1 support (XServe g5)
*
* History:
*
@@ -73,6 +76,15 @@
* values in the configuration register
* - Switch back to use of target fan speed for PID, thus lowering
* pressure on i2c
+ *
+ * Oct. 20, 2004 : 1.1
+ * - Add device-tree lookup for fan IDs, should detect liquid cooling
+ * pumps when present
+ * - Enable driver for PowerMac7,3 machines
+ * - Split the U3/Backside cooling on U3 & U3H versions as Darwin does
+ * - Add new CPU cooling algorithm for machines with liquid cooling
+ * - Workaround for some PowerMac7,3 with empty "fan" node in the devtree
+ * - Fix a signed/unsigned compare issue in some PID loops
*/

#include <linux/config.h>
@@ -88,7 +100,6 @@
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
#include <linux/wait.h>
-#include <linux/suspend.h>
#include <linux/reboot.h>
#include <linux/kmod.h>
#include <linux/i2c.h>
@@ -102,7 +113,7 @@

#include "therm_pm72.h"

-#define VERSION "0.9"
+#define VERSION "1.1"

#undef DEBUG

@@ -122,16 +133,100 @@
static struct i2c_adapter * u3_1;
static struct i2c_client * fcu;
static struct cpu_pid_state cpu_state[2];
+static struct basckside_pid_params backside_params;
static struct backside_pid_state backside_state;
static struct drives_pid_state drives_state;
static int state;
static int cpu_count;
+static int cpu_pid_type;
static pid_t ctrl_task;
static struct completion ctrl_complete;
static int critical_state;
static DECLARE_MUTEX(driver_lock);

/*
+ * We have 2 types of CPU PID control. One is "split" old style control
+ * for intake & exhaust fans, the other is "combined" control for both
+ * CPUs that also deals with the pumps when present. To be "compatible"
+ * with OS X at this point, we only use "COMBINED" on the machines that
+ * are identified as having the pumps (though that identification is at
+ * least dodgy). Ultimately, we could probably switch completely to this
+ * algorithm provided we hack it to deal with the UP case
+ */
+#define CPU_PID_TYPE_SPLIT 0
+#define CPU_PID_TYPE_COMBINED 1
+
+/*
+ * This table describes all fans in the FCU. The "id" and "type" values
+ * are defaults valid for all earlier machines. Newer machines will
+ * eventually override the table content based on the device-tree
+ */
+struct fcu_fan_table
+{
+ char* loc; /* location code */
+ int type; /* 0 = rpm, 1 = pwm, 2 = pump */
+ int id; /* id or -1 */
+};
+
+#define FCU_FAN_RPM 0
+#define FCU_FAN_PWM 1
+
+#define FCU_FAN_ABSENT_ID -1
+
+#define FCU_FAN_COUNT ARRAY_SIZE(fcu_fans)
+
+struct fcu_fan_table fcu_fans[] = {
+ [BACKSIDE_FAN_PWM_INDEX] = {
+ .loc = "BACKSIDE",
+ .type = FCU_FAN_PWM,
+ .id = BACKSIDE_FAN_PWM_DEFAULT_ID,
+ },
+ [DRIVES_FAN_RPM_INDEX] = {
+ .loc = "DRIVE BAY",
+ .type = FCU_FAN_RPM,
+ .id = DRIVES_FAN_RPM_DEFAULT_ID,
+ },
+ [SLOTS_FAN_PWM_INDEX] = {
+ .loc = "SLOT",
+ .type = FCU_FAN_PWM,
+ .id = SLOTS_FAN_PWM_DEFAULT_ID,
+ },
+ [CPUA_INTAKE_FAN_RPM_INDEX] = {
+ .loc = "CPU A INTAKE",
+ .type = FCU_FAN_RPM,
+ .id = CPUA_INTAKE_FAN_RPM_DEFAULT_ID,
+ },
+ [CPUA_EXHAUST_FAN_RPM_INDEX] = {
+ .loc = "CPU A EXHAUST",
+ .type = FCU_FAN_RPM,
+ .id = CPUA_EXHAUST_FAN_RPM_DEFAULT_ID,
+ },
+ [CPUB_INTAKE_FAN_RPM_INDEX] = {
+ .loc = "CPU B INTAKE",
+ .type = FCU_FAN_RPM,
+ .id = CPUB_INTAKE_FAN_RPM_DEFAULT_ID,
+ },
+ [CPUB_EXHAUST_FAN_RPM_INDEX] = {
+ .loc = "CPU B EXHAUST",
+ .type = FCU_FAN_RPM,
+ .id = CPUB_EXHAUST_FAN_RPM_DEFAULT_ID,
+ },
+ /* pumps aren't present by default, have to be looked up in the
+ * device-tree
+ */
+ [CPUA_PUMP_RPM_INDEX] = {
+ .loc = "CPU A PUMP",
+ .type = FCU_FAN_RPM,
+ .id = FCU_FAN_ABSENT_ID,
+ },
+ [CPUB_PUMP_RPM_INDEX] = {
+ .loc = "CPU B PUMP",
+ .type = FCU_FAN_RPM,
+ .id = FCU_FAN_ABSENT_ID,
+ },
+};
+
+/*
* i2c_driver structure to attach to the host i2c controller
*/

@@ -332,10 +427,16 @@
return 0;
}

-static int set_rpm_fan(int fan, int rpm)
+static int set_rpm_fan(int fan_index, int rpm)
{
unsigned char buf[2];
- int rc;
+ int rc, id;
+
+ if (fcu_fans[fan_index].type != FCU_FAN_RPM)
+ return -EINVAL;
+ id = fcu_fans[fan_index].id;
+ if (id == FCU_FAN_ABSENT_ID)
+ return -EINVAL;

if (rpm < 300)
rpm = 300;
@@ -343,43 +444,55 @@
rpm = 8191;
buf[0] = rpm >> 5;
buf[1] = rpm << 3;
- rc = fan_write_reg(0x10 + (fan * 2), buf, 2);
+ rc = fan_write_reg(0x10 + (id * 2), buf, 2);
if (rc < 0)
return -EIO;
return 0;
}

-static int get_rpm_fan(int fan, int programmed)
+static int get_rpm_fan(int fan_index, int programmed)
{
unsigned char failure;
unsigned char active;
unsigned char buf[2];
- int rc, reg_base;
+ int rc, id, reg_base;
+
+ if (fcu_fans[fan_index].type != FCU_FAN_RPM)
+ return -EINVAL;
+ id = fcu_fans[fan_index].id;
+ if (id == FCU_FAN_ABSENT_ID)
+ return -EINVAL;

rc = fan_read_reg(0xb, &failure, 1);
if (rc != 1)
return -EIO;
- if ((failure & (1 << fan)) != 0)
+ if ((failure & (1 << id)) != 0)
return -EFAULT;
rc = fan_read_reg(0xd, &active, 1);
if (rc != 1)
return -EIO;
- if ((active & (1 << fan)) == 0)
+ if ((active & (1 << id)) == 0)
return -ENXIO;

/* Programmed value or real current speed */
reg_base = programmed ? 0x10 : 0x11;
- rc = fan_read_reg(reg_base + (fan * 2), buf, 2);
+ rc = fan_read_reg(reg_base + (id * 2), buf, 2);
if (rc != 2)
return -EIO;

return (buf[0] << 5) | buf[1] >> 3;
}

-static int set_pwm_fan(int fan, int pwm)
+static int set_pwm_fan(int fan_index, int pwm)
{
unsigned char buf[2];
- int rc;
+ int rc, id;
+
+ if (fcu_fans[fan_index].type != FCU_FAN_PWM)
+ return -EINVAL;
+ id = fcu_fans[fan_index].id;
+ if (id == FCU_FAN_ABSENT_ID)
+ return -EINVAL;

if (pwm < 10)
pwm = 10;
@@ -387,32 +500,38 @@
pwm = 100;
pwm = (pwm * 2559) / 1000;
buf[0] = pwm;
- rc = fan_write_reg(0x30 + (fan * 2), buf, 1);
+ rc = fan_write_reg(0x30 + (id * 2), buf, 1);
if (rc < 0)
return rc;
return 0;
}

-static int get_pwm_fan(int fan)
+static int get_pwm_fan(int fan_index)
{
unsigned char failure;
unsigned char active;
unsigned char buf[2];
- int rc;
+ int rc, id;
+
+ if (fcu_fans[fan_index].type != FCU_FAN_PWM)
+ return -EINVAL;
+ id = fcu_fans[fan_index].id;
+ if (id == FCU_FAN_ABSENT_ID)
+ return -EINVAL;

rc = fan_read_reg(0x2b, &failure, 1);
if (rc != 1)
return -EIO;
- if ((failure & (1 << fan)) != 0)
+ if ((failure & (1 << id)) != 0)
return -EFAULT;
rc = fan_read_reg(0x2d, &active, 1);
if (rc != 1)
return -EIO;
- if ((active & (1 << fan)) == 0)
+ if ((active & (1 << id)) == 0)
return -ENXIO;

/* Programmed value or real current speed */
- rc = fan_read_reg(0x30 + (fan * 2), buf, 1);
+ rc = fan_read_reg(0x30 + (id * 2), buf, 1);
if (rc != 1)
return -EIO;

@@ -514,80 +633,84 @@
/*
* CPUs fans control loop
*/
-static void do_monitor_cpu(struct cpu_pid_state *state)
+
+static int do_read_one_cpu_values(struct cpu_pid_state *state, s32 *temp, s32 *power)
{
- s32 temp, voltage, current_a, power, power_target;
- s32 integral, derivative, proportional, adj_in_target, sval;
- s64 integ_p, deriv_p, prop_p, sum;
- int i, intake, rc;
+ s32 ltemp, volts, amps;
+ int rc = 0;

- DBG("cpu %d:\n", state->index);
+ /* Default (in case of error) */
+ *temp = state->cur_temp;
+ *power = state->cur_power;

/* Read current fan status */
if (state->index == 0)
- rc = get_rpm_fan(CPUA_EXHAUST_FAN_RPM_ID, !RPM_PID_USE_ACTUAL_SPEED);
+ rc = get_rpm_fan(CPUA_EXHAUST_FAN_RPM_INDEX, !RPM_PID_USE_ACTUAL_SPEED);
else
- rc = get_rpm_fan(CPUB_EXHAUST_FAN_RPM_ID, !RPM_PID_USE_ACTUAL_SPEED);
+ rc = get_rpm_fan(CPUB_EXHAUST_FAN_RPM_INDEX, !RPM_PID_USE_ACTUAL_SPEED);
if (rc < 0) {
- printk(KERN_WARNING "Error %d reading CPU %d exhaust fan !\n",
- rc, state->index);
- /* XXX What do we do now ? */
- } else
+ /* XXX What do we do now ? Nothing for now, keep old value, but
+ * return error upstream
+ */
+ DBG(" cpu %d, fan reading error !\n", state->index);
+ } else {
state->rpm = rc;
- DBG(" current rpm: %d\n", state->rpm);
+ DBG(" cpu %d, exhaust RPM: %d\n", state->index, state->rpm);
+ }

/* Get some sensor readings and scale it */
- temp = read_smon_adc(state, 1);
- if (temp == -1) {
+ ltemp = read_smon_adc(state, 1);
+ if (ltemp == -1) {
+ /* XXX What do we do now ? */
state->overtemp++;
- return;
+ if (rc == 0)
+ rc = -EIO;
+ DBG(" cpu %d, temp reading error !\n", state->index);
+ } else {
+ /* Fixup temperature according to diode calibration
+ */
+ DBG(" cpu %d, temp raw: %04x, m_diode: %04x, b_diode: %04x\n",
+ state->index,
+ ltemp, state->mpu.mdiode, state->mpu.bdiode);
+ *temp = ((s32)ltemp * (s32)state->mpu.mdiode + ((s32)state->mpu.bdiode << 12)) >> 2;
+ state->last_temp = *temp;
+ DBG(" temp: %d.%03d\n", FIX32TOPRINT((*temp)));
}
- voltage = read_smon_adc(state, 3);
- current_a = read_smon_adc(state, 4);

- /* Fixup temperature according to diode calibration
+ /*
+ * Read voltage & current and calculate power
*/
- DBG(" temp raw: %04x, m_diode: %04x, b_diode: %04x\n",
- temp, state->mpu.mdiode, state->mpu.bdiode);
- temp = ((s32)temp * (s32)state->mpu.mdiode + ((s32)state->mpu.bdiode << 12)) >> 2;
- state->last_temp = temp;
- DBG(" temp: %d.%03d\n", FIX32TOPRINT(temp));
+ volts = read_smon_adc(state, 3);
+ amps = read_smon_adc(state, 4);

- /* Check tmax, increment overtemp if we are there. At tmax+8, we go
- * full blown immediately and try to trigger a shutdown
- */
- if (temp >= ((state->mpu.tmax + 8) << 16)) {
- printk(KERN_WARNING "Warning ! CPU %d temperature way above maximum"
- " (%d) !\n",
- state->index, temp >> 16);
- state->overtemp = CPU_MAX_OVERTEMP;
- } else if (temp > (state->mpu.tmax << 16))
- state->overtemp++;
- else
- state->overtemp = 0;
- if (state->overtemp >= CPU_MAX_OVERTEMP)
- critical_state = 1;
- if (state->overtemp > 0) {
- state->rpm = state->mpu.rmaxn_exhaust_fan;
- state->intake_rpm = intake = state->mpu.rmaxn_intake_fan;
- goto do_set_fans;
- }
-
- /* Scale other sensor values according to fixed scales
+ /* Scale voltage and current raw sensor values according to fixed scales
* obtained in Darwin and calculate power from I and V
*/
- state->voltage = voltage *= ADC_CPU_VOLTAGE_SCALE;
- state->current_a = current_a *= ADC_CPU_CURRENT_SCALE;
- power = (((u64)current_a) * ((u64)voltage)) >> 16;
+ volts *= ADC_CPU_VOLTAGE_SCALE;
+ amps *= ADC_CPU_CURRENT_SCALE;
+ *power = (((u64)volts) * ((u64)amps)) >> 16;
+ state->voltage = volts;
+ state->current_a = amps;
+ state->last_power = *power;
+
+ DBG(" cpu %d, current: %d.%03d, voltage: %d.%03d, power: %d.%03d W\n",
+ state->index, FIX32TOPRINT(state->current_a),
+ FIX32TOPRINT(state->voltage), FIX32TOPRINT(*power));
+
+ return 0;
+}
+
+static void do_cpu_pid(struct cpu_pid_state *state, s32 temp, s32 power)
+{
+ s32 power_target, integral, derivative, proportional, adj_in_target, sval;
+ s64 integ_p, deriv_p, prop_p, sum;
+ int i;

/* Calculate power target value (could be done once for all)
* and convert to a 16.16 fp number
*/
power_target = ((u32)(state->mpu.pmaxh - state->mpu.padjmax)) << 16;
-
- DBG(" current: %d.%03d, voltage: %d.%03d\n",
- FIX32TOPRINT(current_a), FIX32TOPRINT(voltage));
- DBG(" power: %d.%03d W, target: %d.%03d, error: %d.%03d\n", FIX32TOPRINT(power),
+ DBG(" power target: %d.%03d, error: %d.%03d\n",
FIX32TOPRINT(power_target), FIX32TOPRINT(power_target - power));

/* Store temperature and power in history array */
@@ -627,7 +750,7 @@
* input target is mpu.ttarget, input max is mpu.tmax
*/
integ_p = ((s64)state->mpu.pid_gr) * (s64)integral;
- DBG(" integ_p: %d\n", (int)(deriv_p >> 36));
+ DBG(" integ_p: %d\n", (int)(integ_p >> 36));
sval = (state->mpu.tmax << 16) - ((integ_p >> 20) & 0xffffffff);
adj_in_target = (state->mpu.ttarget << 16);
if (adj_in_target > sval)
@@ -656,15 +779,136 @@
DBG(" sum: %d\n", (int)sum);
state->rpm += (s32)sum;

- if (state->rpm < state->mpu.rminn_exhaust_fan)
+ if (state->rpm < (int)state->mpu.rminn_exhaust_fan)
state->rpm = state->mpu.rminn_exhaust_fan;
- if (state->rpm > state->mpu.rmaxn_exhaust_fan)
+ if (state->rpm > (int)state->mpu.rmaxn_exhaust_fan)
state->rpm = state->mpu.rmaxn_exhaust_fan;
+}
+
+static void do_monitor_cpu_combined(void)
+{
+ struct cpu_pid_state *state0 = &cpu_state[0];
+ struct cpu_pid_state *state1 = &cpu_state[1];
+ s32 temp0, power0, temp1, power1;
+ s32 temp_combi, power_combi;
+ int rc, intake, pump;
+
+ rc = do_read_one_cpu_values(state0, &temp0, &power0);
+ if (rc < 0) {
+ /* XXX What do we do now ? */
+ }
+ state1->overtemp = 0;
+ rc = do_read_one_cpu_values(state1, &temp1, &power1);
+ if (rc < 0) {
+ /* XXX What do we do now ? */
+ }
+ if (state1->overtemp)
+ state0->overtemp++;
+
+ temp_combi = max(temp0, temp1);
+ power_combi = max(power0, power1);
+
+ /* Check tmax, increment overtemp if we are there. At tmax+8, we go
+ * full blown immediately and try to trigger a shutdown
+ */
+ if (temp_combi >= ((state0->mpu.tmax + 8) << 16)) {
+ printk(KERN_WARNING "Warning ! Temperature way above maximum (%d) !\n",
+ temp_combi >> 16);
+ state0->overtemp = CPU_MAX_OVERTEMP;
+ } else if (temp_combi > (state0->mpu.tmax << 16))
+ state0->overtemp++;
+ else
+ state0->overtemp = 0;
+ if (state0->overtemp >= CPU_MAX_OVERTEMP)
+ critical_state = 1;
+ if (state0->overtemp > 0) {
+ state0->rpm = state0->mpu.rmaxn_exhaust_fan;
+ state0->intake_rpm = intake = state0->mpu.rmaxn_intake_fan;
+ pump = CPU_PUMP_OUTPUT_MAX;
+ goto do_set_fans;
+ }
+
+ /* Do the PID */
+ do_cpu_pid(state0, temp_combi, power_combi);
+
+ /* Calculate intake fan speed */
+ intake = (state0->rpm * CPU_INTAKE_SCALE) >> 16;
+ if (intake < (int)state0->mpu.rminn_intake_fan)
+ intake = state0->mpu.rminn_intake_fan;
+ if (intake > (int)state0->mpu.rmaxn_intake_fan)
+ intake = state0->mpu.rmaxn_intake_fan;
+ state0->intake_rpm = intake;
+
+ /* Calculate pump speed */
+ pump = (state0->rpm * CPU_PUMP_OUTPUT_MAX) /
+ state0->mpu.rmaxn_exhaust_fan;
+ if (pump > CPU_PUMP_OUTPUT_MAX)
+ pump = CPU_PUMP_OUTPUT_MAX;
+ if (pump < CPU_PUMP_OUTPUT_MIN)
+ pump = CPU_PUMP_OUTPUT_MIN;
+
+ do_set_fans:
+ /* We copy values from state 0 to state 1 for /sysfs */
+ state1->rpm = state0->rpm;
+ state1->intake_rpm = state0->intake_rpm;
+
+ DBG("** CPU %d RPM: %d Ex, %d, Pump: %d, In, overtemp: %d\n",
+ state1->index, (int)state1->rpm, intake, pump, state1->overtemp);
+
+ /* We should check for errors, shouldn't we ? But then, what
+ * do we do once the error occurs ? For FCU notified fan
+ * failures (-EFAULT) we probably want to notify userland
+ * some way...
+ */
+ set_rpm_fan(CPUA_INTAKE_FAN_RPM_INDEX, intake);
+ set_rpm_fan(CPUA_EXHAUST_FAN_RPM_INDEX, state0->rpm);
+ set_rpm_fan(CPUB_INTAKE_FAN_RPM_INDEX, intake);
+ set_rpm_fan(CPUB_EXHAUST_FAN_RPM_INDEX, state0->rpm);
+
+ if (fcu_fans[CPUA_PUMP_RPM_INDEX].id != FCU_FAN_ABSENT_ID)
+ set_rpm_fan(CPUA_PUMP_RPM_INDEX, pump);
+ if (fcu_fans[CPUB_PUMP_RPM_INDEX].id != FCU_FAN_ABSENT_ID)
+ set_rpm_fan(CPUB_PUMP_RPM_INDEX, pump);
+}
+
+static void do_monitor_cpu_split(struct cpu_pid_state *state)
+{
+ s32 temp, power;
+ int rc, intake;
+
+ /* Read current fan status */
+ rc = do_read_one_cpu_values(state, &temp, &power);
+ if (rc < 0) {
+ /* XXX What do we do now ? */
+ }
+
+ /* Check tmax, increment overtemp if we are there. At tmax+8, we go
+ * full blown immediately and try to trigger a shutdown
+ */
+ if (temp >= ((state->mpu.tmax + 8) << 16)) {
+ printk(KERN_WARNING "Warning ! CPU %d temperature way above maximum"
+ " (%d) !\n",
+ state->index, temp >> 16);
+ state->overtemp = CPU_MAX_OVERTEMP;
+ } else if (temp > (state->mpu.tmax << 16))
+ state->overtemp++;
+ else
+ state->overtemp = 0;
+ if (state->overtemp >= CPU_MAX_OVERTEMP)
+ critical_state = 1;
+ if (state->overtemp > 0) {
+ state->rpm = state->mpu.rmaxn_exhaust_fan;
+ state->intake_rpm = intake = state->mpu.rmaxn_intake_fan;
+ goto do_set_fans;
+ }
+
+ /* Do the PID */
+ do_cpu_pid(state, temp, power);

intake = (state->rpm * CPU_INTAKE_SCALE) >> 16;
- if (intake < state->mpu.rminn_intake_fan)
+ if (intake < (int)state->mpu.rminn_intake_fan)
intake = state->mpu.rminn_intake_fan;
- if (intake > state->mpu.rmaxn_intake_fan)
+ if (intake > (int)state->mpu.rmaxn_intake_fan)
intake = state->mpu.rmaxn_intake_fan;
state->intake_rpm = intake;

@@ -678,11 +922,11 @@
* some way...
*/
if (state->index == 0) {
- set_rpm_fan(CPUA_INTAKE_FAN_RPM_ID, intake);
- set_rpm_fan(CPUA_EXHAUST_FAN_RPM_ID, state->rpm);
+ set_rpm_fan(CPUA_INTAKE_FAN_RPM_INDEX, intake);
+ set_rpm_fan(CPUA_EXHAUST_FAN_RPM_INDEX, state->rpm);
} else {
- set_rpm_fan(CPUB_INTAKE_FAN_RPM_ID, intake);
- set_rpm_fan(CPUB_EXHAUST_FAN_RPM_ID, state->rpm);
+ set_rpm_fan(CPUB_INTAKE_FAN_RPM_INDEX, intake);
+ set_rpm_fan(CPUB_EXHAUST_FAN_RPM_INDEX, state->rpm);
}
}

@@ -697,6 +941,7 @@
state->overtemp = 0;
state->adc_config = 0x00;

+
if (index == 0)
state->monitor = attach_i2c_chip(SUPPLY_MONITOR_ID, "CPU0_monitor");
else if (index == 1)
@@ -779,7 +1024,7 @@
DBG("backside:\n");

/* Check fan status */
- rc = get_pwm_fan(BACKSIDE_FAN_PWM_ID);
+ rc = get_pwm_fan(BACKSIDE_FAN_PWM_INDEX);
if (rc < 0) {
printk(KERN_WARNING "Error %d reading backside fan !\n", rc);
/* XXX What do we do now ? */
@@ -791,12 +1036,12 @@
temp = i2c_smbus_read_byte_data(state->monitor, MAX6690_EXT_TEMP) << 16;
state->last_temp = temp;
DBG(" temp: %d.%03d, target: %d.%03d\n", FIX32TOPRINT(temp),
- FIX32TOPRINT(BACKSIDE_PID_INPUT_TARGET));
+ FIX32TOPRINT(backside_params.input_target));

/* Store temperature and error in history array */
state->cur_sample = (state->cur_sample + 1) % BACKSIDE_PID_HISTORY_SIZE;
state->sample_history[state->cur_sample] = temp;
- state->error_history[state->cur_sample] = temp - BACKSIDE_PID_INPUT_TARGET;
+ state->error_history[state->cur_sample] = temp - backside_params.input_target;

/* If first loop, fill the history table */
if (state->first) {
@@ -805,7 +1050,7 @@
BACKSIDE_PID_HISTORY_SIZE;
state->sample_history[state->cur_sample] = temp;
state->error_history[state->cur_sample] =
- temp - BACKSIDE_PID_INPUT_TARGET;
+ temp - backside_params.input_target;
}
state->first = 0;
}
@@ -817,7 +1062,7 @@
integral += state->error_history[i];
integral *= BACKSIDE_PID_INTERVAL;
DBG(" integral: %08x\n", integral);
- integ_p = ((s64)BACKSIDE_PID_G_r) * (s64)integral;
+ integ_p = ((s64)backside_params.G_r) * (s64)integral;
DBG(" integ_p: %d\n", (int)(integ_p >> 36));
sum += integ_p;

@@ -826,12 +1071,12 @@
state->error_history[(state->cur_sample + BACKSIDE_PID_HISTORY_SIZE - 1)
% BACKSIDE_PID_HISTORY_SIZE];
derivative /= BACKSIDE_PID_INTERVAL;
- deriv_p = ((s64)BACKSIDE_PID_G_d) * (s64)derivative;
+ deriv_p = ((s64)backside_params.G_d) * (s64)derivative;
DBG(" deriv_p: %d\n", (int)(deriv_p >> 36));
sum += deriv_p;

/* Calculate the proportional term */
- prop_p = ((s64)BACKSIDE_PID_G_p) * (s64)(state->error_history[state->cur_sample]);
+ prop_p = ((s64)backside_params.G_p) * (s64)(state->error_history[state->cur_sample]);
DBG(" prop_p: %d\n", (int)(prop_p >> 36));
sum += prop_p;

@@ -840,13 +1085,13 @@

DBG(" sum: %d\n", (int)sum);
state->pwm += (s32)sum;
- if (state->pwm < BACKSIDE_PID_OUTPUT_MIN)
- state->pwm = BACKSIDE_PID_OUTPUT_MIN;
- if (state->pwm > BACKSIDE_PID_OUTPUT_MAX)
- state->pwm = BACKSIDE_PID_OUTPUT_MAX;
+ if (state->pwm < backside_params.output_min)
+ state->pwm = backside_params.output_min;
+ if (state->pwm > backside_params.output_max)
+ state->pwm = backside_params.output_max;

DBG("** BACKSIDE PWM: %d\n", (int)state->pwm);
- set_pwm_fan(BACKSIDE_FAN_PWM_ID, state->pwm);
+ set_pwm_fan(BACKSIDE_FAN_PWM_INDEX, state->pwm);
}

/*
@@ -854,6 +1099,35 @@
*/
static int init_backside_state(struct backside_pid_state *state)
{
+ struct device_node *u3;
+ int u3h = 1; /* conservative by default */
+
+ /*
+ * There are different PID params for machines with U3 and machines
+ * with U3H, pick the right ones now
+ */
+ u3 = of_find_node_by_path("/u3@0,f8000000");
+ if (u3 != NULL) {
+ u32 *vers = (u32 *)get_property(u3, "device-rev", NULL);
+ if (vers)
+ if (((*vers) & 0x3f) < 0x34)
+ u3h = 0;
+ of_node_put(u3);
+ }
+
+ backside_params.G_p = BACKSIDE_PID_G_p;
+ backside_params.G_r = BACKSIDE_PID_G_r;
+ backside_params.output_max = BACKSIDE_PID_OUTPUT_MAX;
+ if (u3h) {
+ backside_params.G_d = BACKSIDE_PID_U3H_G_d;
+ backside_params.input_target = BACKSIDE_PID_U3H_INPUT_TARGET;
+ backside_params.output_min = BACKSIDE_PID_U3H_OUTPUT_MIN;
+ } else {
+ backside_params.G_d = BACKSIDE_PID_U3_G_d;
+ backside_params.input_target = BACKSIDE_PID_U3_INPUT_TARGET;
+ backside_params.output_min = BACKSIDE_PID_U3_OUTPUT_MIN;
+ }
+
state->ticks = 1;
state->first = 1;
state->pwm = 50;
@@ -899,7 +1173,7 @@
DBG("drives:\n");

/* Check fan status */
- rc = get_rpm_fan(DRIVES_FAN_RPM_ID, !RPM_PID_USE_ACTUAL_SPEED);
+ rc = get_rpm_fan(DRIVES_FAN_RPM_INDEX, !RPM_PID_USE_ACTUAL_SPEED);
if (rc < 0) {
printk(KERN_WARNING "Error %d reading drives fan !\n", rc);
/* XXX What do we do now ? */
@@ -966,7 +1240,7 @@
state->rpm = DRIVES_PID_OUTPUT_MAX;

DBG("** DRIVES RPM: %d\n", (int)state->rpm);
- set_rpm_fan(DRIVES_FAN_RPM_ID, state->rpm);
+ set_rpm_fan(DRIVES_FAN_RPM_INDEX, state->rpm);
}

/*
@@ -1033,7 +1307,7 @@
}

/* Set the PCI fan once for now */
- set_pwm_fan(SLOTS_FAN_PWM_ID, SLOTS_FAN_DEFAULT_PWM);
+ set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM);

/* Initialize ADCs */
initialize_adc(&cpu_state[0]);
@@ -1045,17 +1319,16 @@
while (state == state_attached) {
unsigned long elapsed, start;

- if (current->flags & PF_FREEZE) {
- printk(KERN_INFO "therm_pm72: freezing thermostat\n");
- refrigerator(PF_FREEZE);
- }
-
start = jiffies;

down(&driver_lock);
- do_monitor_cpu(&cpu_state[0]);
- if (cpu_state[1].monitor != NULL)
- do_monitor_cpu(&cpu_state[1]);
+ if (cpu_pid_type == CPU_PID_TYPE_COMBINED)
+ do_monitor_cpu_combined();
+ else {
+ do_monitor_cpu_split(&cpu_state[0]);
+ if (cpu_state[1].monitor != NULL)
+ do_monitor_cpu_split(&cpu_state[1]);
+ }
do_monitor_backside(&backside_state);
do_monitor_drives(&drives_state);
up(&driver_lock);
@@ -1119,6 +1392,19 @@

DBG("counted %d CPUs in the device-tree\n", cpu_count);

+ /* Decide the type of PID algorithm to use based on the presence of
+ * the pumps, though that may not be the best way, that is good enough
+ * for now
+ */
+ if (machine_is_compatible("PowerMac7,3")
+ && (cpu_count > 1)
+ && fcu_fans[CPUA_PUMP_RPM_INDEX].id != FCU_FAN_ABSENT_ID
+ && fcu_fans[CPUB_PUMP_RPM_INDEX].id != FCU_FAN_ABSENT_ID) {
+ printk(KERN_INFO "Liquid cooling pumps detected, using new algorithm !\n");
+ cpu_pid_type = CPU_PID_TYPE_COMBINED;
+ } else
+ cpu_pid_type = CPU_PID_TYPE_SPLIT;
+
/* Create control loops for everything. If any fail, everything
* fails
*/
@@ -1263,12 +1549,91 @@
return 0;
}

+static void fcu_lookup_fans(struct device_node *fcu_node)
+{
+ struct device_node *np = NULL;
+ int i;
+
+ /* The table is filled by default with values that are suitable
+ * for the old machines without device-tree informations. We scan
+ * the device-tree and override those values with whatever is
+ * there
+ */
+
+ DBG("Looking up FCU controls in device-tree...\n");
+
+ while ((np = of_get_next_child(fcu_node, np)) != NULL) {
+ int type = -1;
+ char *loc;
+ u32 *reg;
+
+ DBG(" control: %s, type: %s\n", np->name, np->type);
+
+ /* Detect control type */
+ if (!strcmp(np->type, "fan-rpm-control") ||
+ !strcmp(np->type, "fan-rpm"))
+ type = FCU_FAN_RPM;
+ if (!strcmp(np->type, "fan-pwm-control") ||
+ !strcmp(np->type, "fan-pwm"))
+ type = FCU_FAN_PWM;
+ /* Only care about fans for now */
+ if (type == -1)
+ continue;
+
+ /* Lookup for a matching location */
+ loc = (char *)get_property(np, "location", NULL);
+ reg = (u32 *)get_property(np, "reg", NULL);
+ if (loc == NULL || reg == NULL)
+ continue;
+ DBG(" matching location: %s, reg: 0x%08x\n", loc, *reg);
+
+ for (i = 0; i < FCU_FAN_COUNT; i++) {
+ int fan_id;
+
+ if (strcmp(loc, fcu_fans[i].loc))
+ continue;
+ DBG(" location match, index: %d\n", i);
+ fcu_fans[i].id = FCU_FAN_ABSENT_ID;
+ if (type != fcu_fans[i].type) {
+ printk(KERN_WARNING "therm_pm72: Fan type mismatch "
+ "in device-tree for %s\n", np->full_name);
+ break;
+ }
+ if (type == FCU_FAN_RPM)
+ fan_id = ((*reg) - 0x10) / 2;
+ else
+ fan_id = ((*reg) - 0x30) / 2;
+ if (fan_id > 7) {
+ printk(KERN_WARNING "therm_pm72: Can't parse "
+ "fan ID in device-tree for %s\n", np->full_name);
+ break;
+ }
+ DBG(" fan id -> %d, type -> %d\n", fan_id, type);
+ fcu_fans[i].id = fan_id;
+ }
+ }
+
+ /* Now dump the array */
+ printk(KERN_INFO "Detected fan controls:\n");
+ for (i = 0; i < FCU_FAN_COUNT; i++) {
+ if (fcu_fans[i].id == FCU_FAN_ABSENT_ID)
+ continue;
+ printk(KERN_INFO " %d: %s fan, id %d, location: %s\n", i,
+ fcu_fans[i].type == FCU_FAN_RPM ? "RPM" : "PWM",
+ fcu_fans[i].id, fcu_fans[i].loc);
+ }
+}
+
static int fcu_of_probe(struct of_device* dev, const struct of_match *match)
{
int rc;

state = state_detached;

+ /* Lookup the fans in the device tree */
+ fcu_lookup_fans(dev->node);
+
+ /* Add the driver */
rc = i2c_add_driver(&therm_pm72_driver);
if (rc < 0)
return rc;
@@ -1307,15 +1672,20 @@
{
struct device_node *np;

- if (!machine_is_compatible("PowerMac7,2"))
+ if (!machine_is_compatible("PowerMac7,2") &&
+ !machine_is_compatible("PowerMac7,3"))
return -ENODEV;

printk(KERN_INFO "PowerMac G5 Thermal control driver %s\n", VERSION);

np = of_find_node_by_type(NULL, "fcu");
if (np == NULL) {
- printk(KERN_ERR "Can't find FCU in device-tree !\n");
- return -ENODEV;
+ /* Some machines have strangely broken device-tree */
+ np = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/fan@15e");
+ if (np == NULL) {
+ printk(KERN_ERR "Can't find FCU in device-tree !\n");
+ return -ENODEV;
+ }
}
of_dev = of_platform_device_create(np, "temperature");
if (of_dev == NULL) {
Index: linux-work/drivers/macintosh/therm_pm72.h
===================================================================
--- linux-work.orig/drivers/macintosh/therm_pm72.h 2004-09-24 14:34:05.000000000 +1000
+++ linux-work/drivers/macintosh/therm_pm72.h 2004-10-22 11:07:51.290944832 +1000
@@ -119,18 +119,33 @@
#define ADC_CPU_CURRENT_SCALE 0x1f40 /* _AD4 */

/*
- * PID factors for the U3/Backside fan control loop
+ * PID factors for the U3/Backside fan control loop. We have 2 sets
+ * of values here, one set for U3 and one set for U3H
*/
-#define BACKSIDE_FAN_PWM_ID 1
-#define BACKSIDE_PID_G_d 0x02800000
+#define BACKSIDE_FAN_PWM_DEFAULT_ID 1
+#define BACKSIDE_FAN_PWM_INDEX 0
+#define BACKSIDE_PID_U3_G_d 0x02800000
+#define BACKSIDE_PID_U3H_G_d 0x01400000
#define BACKSIDE_PID_G_p 0x00500000
#define BACKSIDE_PID_G_r 0x00000000
-#define BACKSIDE_PID_INPUT_TARGET 0x00410000
+#define BACKSIDE_PID_U3_INPUT_TARGET 0x00410000
+#define BACKSIDE_PID_U3H_INPUT_TARGET 0x004b0000
#define BACKSIDE_PID_INTERVAL 5
#define BACKSIDE_PID_OUTPUT_MAX 100
-#define BACKSIDE_PID_OUTPUT_MIN 20
+#define BACKSIDE_PID_U3_OUTPUT_MIN 20
+#define BACKSIDE_PID_U3H_OUTPUT_MIN 30
#define BACKSIDE_PID_HISTORY_SIZE 2

+struct basckside_pid_params
+{
+ s32 G_d;
+ s32 G_p;
+ s32 G_r;
+ s32 input_target;
+ s32 output_min;
+ s32 output_max;
+};
+
struct backside_pid_state
{
int ticks;
@@ -146,7 +161,8 @@
/*
* PID factors for the Drive Bay fan control loop
*/
-#define DRIVES_FAN_RPM_ID 2
+#define DRIVES_FAN_RPM_DEFAULT_ID 2
+#define DRIVES_FAN_RPM_INDEX 1
#define DRIVES_PID_G_d 0x01e00000
#define DRIVES_PID_G_p 0x00500000
#define DRIVES_PID_G_r 0x00000000
@@ -168,7 +184,8 @@
int first;
};

-#define SLOTS_FAN_PWM_ID 2
+#define SLOTS_FAN_PWM_DEFAULT_ID 2
+#define SLOTS_FAN_PWM_INDEX 2
#define SLOTS_FAN_DEFAULT_PWM 50 /* Do better here ! */

/*
@@ -191,10 +208,15 @@
* CPU B FAKE POWER 49 (I_V_inputs: 18, 19)
*/

-#define CPUA_INTAKE_FAN_RPM_ID 3
-#define CPUA_EXHAUST_FAN_RPM_ID 4
-#define CPUB_INTAKE_FAN_RPM_ID 5
-#define CPUB_EXHAUST_FAN_RPM_ID 6
+#define CPUA_INTAKE_FAN_RPM_DEFAULT_ID 3
+#define CPUA_EXHAUST_FAN_RPM_DEFAULT_ID 4
+#define CPUB_INTAKE_FAN_RPM_DEFAULT_ID 5
+#define CPUB_EXHAUST_FAN_RPM_DEFAULT_ID 6
+
+#define CPUA_INTAKE_FAN_RPM_INDEX 3
+#define CPUA_EXHAUST_FAN_RPM_INDEX 4
+#define CPUB_INTAKE_FAN_RPM_INDEX 5
+#define CPUB_EXHAUST_FAN_RPM_INDEX 6

#define CPU_INTAKE_SCALE 0x0000f852
#define CPU_TEMP_HISTORY_SIZE 2
@@ -202,6 +224,11 @@
#define CPU_PID_INTERVAL 1
#define CPU_MAX_OVERTEMP 30

+#define CPUA_PUMP_RPM_INDEX 7
+#define CPUB_PUMP_RPM_INDEX 8
+#define CPU_PUMP_OUTPUT_MAX 3700
+#define CPU_PUMP_OUTPUT_MIN 1000
+
struct cpu_pid_state
{
int index;
@@ -219,6 +246,7 @@
s32 voltage;
s32 current_a;
s32 last_temp;
+ s32 last_power;
int first;
u8 adc_config;
};

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:07    [W:0.047 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site