lkml.org 
[lkml]   [2004]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: DMA timeout error
add pci=noapic to your boot option
;)

Adam Sherman wrote:

> I have a VIA M6000 board with an ATA CompactFlash adaptor containing a
> 512MB SanDisk card.
>
> I get the following error during boot:
>
> hdb: dma_timer_expiry: dma status == 0x41
> hdb: DMA timeout error
> hdb: dma timeout error: status=0x58 { DriveReady SeekComplete
> DataRequest }
>
> hdb: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>
> hdb: drive not ready for command
> hdb: dma_timer_expiry: dma status == 0x41
> hdb: DMA timeout error
> hdb: dma timeout error: status=0x58 { DriveReady SeekComplete
> DataRequest }
>
> hdb: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>
> hdb: drive not ready for command
>
>
> Any ideas?
>
> Thanks,
>
> A.
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe
> linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

--
/* Beber : beber (AT) setibzh (DOT) com
* https://guybrush.ath.cx
* Using Mozilla Thunderbird on Gentoo Linux
* Rachel @ friends.paris
*/


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:06    [W:0.041 / U:1.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site