lkml.org 
[lkml]   [2004]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: hang after resume with adb: starting probe task.
From
Date
On Sat, 2004-10-09 at 11:03 +1000, Benjamin Herrenschmidt wrote:
> > Actually there was nothing plugged into the ethernet nor usb port. Could
> > it also be the airport failing ? I still use orinoco cvs, i.e. airport
> > 0.15rc2HEAD, but that one also on 2.6.8.1.
> >
> > I now have a more or less reliable way of making this pbook crash: put
> > it to sleep and wake it up as soon it is sleeping.
>
> Difficult to say at this point. One thing possible is to add printk's
> (or more violent btext_drawstring) when calling the sleep / wakeup
> callbacks of drivers in drivers/base/power/* and drivers/macintosh/via-pmu.c
> and try to figure where precisely it dies.

Well, I now realize that I turned on CONFIG_USB_SUSPEND which also
caused slightly different kernel messages. I turned this option off
again and had no crash since then (for 4 days).


w/o CONFIG_USB_SUSPEND:
========================
eth1: Airport entering sleep mode
eth0: suspending, WakeOnLan disabled
radeonfb: suspending to state: 3...
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 0x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 0x mode
radeonfb: switching to D2 state...
cpufreq: resume failed to assert current frequency is what timing core thinks it
is.
radeonfb: switching to D0 state...
radeonfb: resumed !
eth1: get_wireless_stats() called while device not present
enable_irq(27) unbalanced
enable_irq(28) unbalanced
eth0: resuming
eth1: get_wireless_stats() called while device not present
eth1: Airport waking up
ide_pmac: Set UDMA timing for mode 4, reg: 0x0c50038c
hda: Enabling Ultra DMA 4
hdc: MDMA, cycleTime: 120, accessTime: 90, recTime: 30
hdc: Set MDMA timing for mode 2, reg: 0x00011d26
hdc: Enabling MultiWord DMA 2
adb: starting probe task...
adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
ADB keyboard at 2, handler 1
ADB mouse at 3, handler set to 4 (trackpad)
adb: finished probe task...
PHY ID: 2060e1, addr: 0

with CONFIG_USB_SUSPEND:
========================
ohci_hcd 0001:10:19.0: Unlink after no-IRQ? Different ACPI or APIC settings may help.
ohci_hcd 0001:10:18.0: Unlink after no-IRQ? Different ACPI or APIC settings may help.
eth1: Airport entering sleep mode
eth0: suspending, WakeOnLan disabled
radeonfb: suspending to state: 3...
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 0x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 0x mode
radeonfb: switching to D2 state...
cpufreq: resume failed to assert current frequency is what timing core thinks it is.
radeonfb: switching to D0 state...
radeonfb: resumed !
enable_irq(27) unbalanced
enable_irq(28) unbalanced
eth0: resuming
eth1: Airport waking up
ide_pmac: Set UDMA timing for mode 4, reg: 0x0c50038c
hda: Enabling Ultra DMA 4
hdc: MDMA, cycleTime: 120, accessTime: 90, recTime: 30
hdc: Set MDMA timing for mode 2, reg: 0x00011d26
hdc: Enabling MultiWord DMA 2
hub 1-0:1.0: reactivate --> -22
hub 2-0:1.0: reactivate --> -22
adb: starting probe task...
adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
ADB keyboard at 2, handler 1
ADB mouse at 3, handler set to 4 (trackpad)
adb: finished probe task...
PHY ID: 2060e1, addr: 0

Soeren
--
Sometimes, there's a moment as you're waking, when you become aware of
the real world around you, but you're still dreaming.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:07    [W:0.037 / U:11.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site