lkml.org 
[lkml]   [2004]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: 2.6.9-rc4-mm1 OOPs on AMD64
    From
    Date
    On Thu, 2004-10-14 at 12:01, Andi Kleen wrote:
    > > I will leave it capable hands of Andi to figure out whats wrong
    > > with it. Andi, if you want me to test the fix, send it my way.
    >
    > Oops. Weird, it worked on my machines.
    >
    > Sorry for the problems and thanks for tracking it down
    > I will look at it. Andrew, probably just back it out for now.
    >
    > Badari, Can you send me the beginning of your boot.msg again so that
    > I can see your node layout? (you probably did already, but I cannot
    > find the mail anymore)
    >
    > -Andi

    No problem. Here is the boot.msg with the patch backed out. (when its
    boots fine).

    Thanks,
    Badari
    klogd 1.4.1, log source = ksyslog started.
    <4>Bootdata ok (command line is root=/dev/hda2 vga=0 splash=silent
    console=tty0 console=ttyS0,38400 desktop resume=/dev/hda1 showopts)
    <4>Linux version 2.6.9-rc4-mm1n (root@elm3b29) (gcc version 3.3.3 (SuSE
    Linux)) #1 SMP Thu Oct 14 12:12:09 PDT 2004
    <6>BIOS-provided physical RAM map:
    <4> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    <4> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    <4> BIOS-e820: 00000000000ca000 - 0000000000100000 (reserved)
    <4> BIOS-e820: 0000000000100000 - 00000000dfef0000 (usable)
    <4> BIOS-e820: 00000000dfef0000 - 00000000dfeff000 (ACPI data)
    <4> BIOS-e820: 00000000dfeff000 - 00000000dff00000 (ACPI NVS)
    <4> BIOS-e820: 00000000dff00000 - 00000000e0000000 (usable)
    <4> BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
    <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    <4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    <4> BIOS-e820: 0000000100000000 - 00000001e0000000 (usable)
    <6>Scanning NUMA topology in Northbridge 24
    <6>Number of nodes 4 (30030)
    <6>Node 0 MemBase 0000000000000000 Limit 000000017fffffff
    <6>Node 1 MemBase 0000000180000000 Limit 000000019fffffff
    <6>Node 2 MemBase 00000001a0000000 Limit 00000001bfffffff
    <6>Node 3 MemBase 00000001c0000000 Limit 00000001dfffffff
    <6>node 1 shift 24 addr 180000000 conflict 0
    <6>Using node hash shift of 25
    <4>Bootmem setup node 0 0000000000000000-000000017fffffff
    <4>Bootmem setup node 1 0000000180000000-000000019fffffff
    <4>Bootmem setup node 2 00000001a0000000-00000001bfffffff
    <4>Bootmem setup node 3 00000001c0000000-00000001dfffffff
    <6>No mptable found.
    <7>On node 0 totalpages: 1572863
    <7> DMA zone: 4096 pages, LIFO batch:1
    <7> Normal zone: 1568767 pages, LIFO batch:16
    <7> HighMem zone: 0 pages, LIFO batch:1
    <7>On node 1 totalpages: 131071
    <7> DMA zone: 0 pages, LIFO batch:1
    <7> Normal zone: 131071 pages, LIFO batch:16
    <7> HighMem zone: 0 pages, LIFO batch:1
    <7>On node 2 totalpages: 131071
    <7> DMA zone: 0 pages, LIFO batch:1
    <7> Normal zone: 131071 pages, LIFO batch:16
    <7> HighMem zone: 0 pages, LIFO batch:1
    <7>On node 3 totalpages: 131071
    <7> DMA zone: 0 pages, LIFO batch:1
    <7> Normal zone: 131071 pages, LIFO batch:16
    <7> HighMem zone: 0 pages, LIFO batch:1
    <7>ACPI: RSDP (v002 PTLTD ) @
    0x00000000000f6970
    <7>ACPI: XSDT (v001 PTLTD XSDT 0x06040000 LTP 0x00000000) @
    0x00000000dfefc625
    <7>ACPI: FADT (v003 AMD HAMMER 0x06040000 PTEC 0x000f4240) @
    0x00000000dfefed02
    <7>ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @
    0x00000000dfefedf6
    <7>ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
    0x00000000dfefef56
    <7>ACPI: DSDT (v001 AMD-K8 AMDACPI 0x06040000 MSFT 0x0100000d) @
    0x0000000000000000
    <7>ACPI: Local APIC address 0xfee00000
    <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    <6>Processor #0 15:5 APIC version 16
    <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    <6>Processor #1 15:5 APIC version 16
    <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    <6>Processor #2 15:5 APIC version 16
    <6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    <6>Processor #3 15:5 APIC version 16
    <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    <6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    <6>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    <6>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    <6>IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
    <6>ACPI: IOAPIC (id[0x05] address[0xfa400000] gsi_base[24])
    <6>IOAPIC[1]: apic_id 5, version 17, address 0xfa400000, GSI 24-27
    <6>ACPI: IOAPIC (id[0x06] address[0xfa401000] gsi_base[28])
    <6>IOAPIC[2]: apic_id 6, version 17, address 0xfa401000, GSI 28-31
    <6>ACPI: IOAPIC (id[0x07] address[0xfa402000] gsi_base[32])
    <6>IOAPIC[3]: apic_id 7, version 17, address 0xfa402000, GSI 32-35
    <6>ACPI: IOAPIC (id[0x08] address[0xfa404000] gsi_base[36])
    <6>IOAPIC[4]: apic_id 8, version 17, address 0xfa404000, GSI 36-39
    <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    <7>ACPI: IRQ0 used by override.
    <7>ACPI: IRQ2 used by override.
    <7>ACPI: IRQ9 used by override.
    <6>Setting APIC routing to flat
    <6>Using ACPI (MADT) for SMP configuration information
    <4>Checking aperture...
    <4>CPU 0: aperture @ 0 size 32 MB
    <4>No AGP bridge found
    <4>Your BIOS doesn't leave a aperture memory hole
    <4>Please enable the IOMMU option in the BIOS setup
    <4>This costs you 64 MB of RAM
    <4>Mapping aperture over 65536 KB of RAM @ 8000000
    <4>Built 4 zonelists
    <4>Initializing CPU#0
    <4>Kernel command line: root=/dev/hda2 vga=0 splash=silent console=tty0
    console=ttyS0,38400 desktop resume=/dev/hda1 showopts
    <4>PID hash table entries: 4096 (order: 12, 131072 bytes)
    <6>time.c: Using 1.193182 MHz PIT timer.
    <6>time.c: Detected 1398.189 MHz processor.
    <4>Console: colour VGA+ 80x25
    <4>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    <4>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    <4>Memory: 7146624k/7864320k available (3058k kernel code, 0k reserved,
    1853k data, 220k init)
    <7>Calibrating delay loop... 2752.51 BogoMIPS (lpj=1376256)
    <6>Security Scaffold v1.0.0 initialized
    <6>Capability LSM initialized
    <4>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
    <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    <6>CPU: L2 Cache: 1024K (64 bytes/line)
    <6>Using local APIC NMI watchdog using perfctr0
    <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    <6>CPU: L2 Cache: 1024K (64 bytes/line)
    <6>CPU0: Opteron MP w/ 1MB stepping 00
    <6>per-CPU timeslice cutoff: 1023.82 usecs.
    <6>task migration cache decay timeout: 2 msecs.
    <6>Booting processor 1/1 rip 6000 rsp 1018071df58
    <4>Initializing CPU#1
    <7>Calibrating delay loop... 2793.47 BogoMIPS (lpj=1396736)
    <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    <6>CPU: L2 Cache: 1024K (64 bytes/line)
    <4>Opteron MP w/ 1MB stepping 00
    <6>Booting processor 2/2 rip 6000 rsp 1019ff85f58
    <4>Initializing CPU#2
    <7>Calibrating delay loop... 2793.47 BogoMIPS (lpj=1396736)
    <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    <6>CPU: L2 Cache: 1024K (64 bytes/line)
    <4>Opteron MP w/ 1MB stepping 00
    <6>Booting processor 3/3 rip 6000 rsp 101bffb1f58
    <4>Initializing CPU#3
    <7>Calibrating delay loop... 2793.47 BogoMIPS (lpj=1396736)
    <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    <6>CPU: L2 Cache: 1024K (64 bytes/line)
    <4>Opteron MP w/ 1MB stepping 00
    <6>Total of 4 processors activated (11132.92 BogoMIPS).
    <6>Using local APIC timer interrupts.
    <6>Detected 12.483 MHz APIC timer.
    <6>checking TSC synchronization across 4 CPUs: passed.
    <6>time.c: Using PIT/TSC based timekeeping.
    <4>Brought up 4 CPUs
    <7>CPU0:
    <7> domain 0: span 01
    <7> groups: 01
    <7> domain 1: span 0f
    <7> groups: 01 02 04 08
    <7>CPU1:
    <7> domain 0: span 02
    <7> groups: 02
    <7> domain 1: span 0f
    <7> groups: 02 04 08 01
    <7>CPU2:
    <7> domain 0: span 04
    <7> groups: 04
    <7> domain 1: span 0f
    <7> groups: 04 08 01 02
    <7>CPU3:
    <7> domain 0: span 08
    <7> groups: 08
    <7> domain 1: span 0f
    <7> groups: 08 01 02 04
    <6>NET: Registered protocol family 16
    <6>PCI: Using configuration type 1
    <6>mtrr: v2.0 (20020519)
    <6>ACPI: Subsystem revision 20040816
    <6>ACPI: Interpreter enabled
    <6>ACPI: Using IOAPIC for interrupt routing
    <6>ACPI: PCI Root Bridge [PCI0] (00:00)
    <4>PCI: Probing PCI hardware (bus 00)
    <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11)
    <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 *10 11)
    <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 10 *11)
    <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TP2P._PRT]
    <6>ACPI: PCI Root Bridge [PCI1] (00:08)
    <4>PCI: Probing PCI hardware (bus 08)
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.G0PA._PRT]
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.G0PB._PRT]
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.G1PB._PRT]
    <5>SCSI subsystem initialized
    <6>PCI: Using ACPI for IRQ routing
    <6>** PCI interrupts are no longer routed automatically. If this
    <6>** causes a device to stop working, it is probably because the
    <6>** driver failed to call pci_enable_device(). As a temporary
    <6>** workaround, the "pci=routeirq" argument restores the old
    <6>** behavior. If this argument makes the device work again,
    <6>** please email the output of "lspci" to bjorn.helgaas@hp.com
    <6>** so I can fix the driver.
    <6>PCI-DMA: Disabling AGP.
    <4>PCI-DMA: aperture base @ 8000000 size 65536 KB
    <6>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    <4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
    <6>audit: initializing netlink socket (disabled)
    <3>audit(1097781300.230:0): initialized
    <4>Total HugeTLB memory allocated, 0
    <5>VFS: Disk quotas dquot_6.5.1
    <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    <6>Initializing Cryptographic API
    <4>vesafb: probe of vesafb0 failed with error -6
    <6>ACPI: Power Button (FF) [PWRF]
    <6>ACPI: Sleep Button (FF) [SLPF]
    <6>ACPI: Processor [CPU0] (supports C1)
    <6>ACPI: Processor [CPU1] (supports C1)
    <6>ACPI: Processor [CPU2] (supports C1)
    <6>ACPI: Processor [CPU3] (supports C1)
    <6>Real Time Clock Driver v1.12
    <6>Non-volatile memory driver v1.2
    <6>Linux agpgart interface v0.100 (c) Dave Jones
    <4>ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1
    <4>ACPI: PS/2 Mouse Controller [PS2M] at irq 12
    <6>serio: i8042 AUX port at 0x60,0x64 irq 12
    <6>serio: i8042 KBD port at 0x60,0x64 irq 1
    <6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
    disabled
    <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    <4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    <4>io scheduler noop registered
    <4>io scheduler anticipatory registered
    <4>io scheduler deadline registered
    <4>io scheduler cfq registered
    <4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024
    blocksize
    <6>loop: loaded (max 8 devices)
    <6>tg3.c:v3.10 (September 14, 2004)
    <6>ACPI: PCI interrupt 0000:19:02.0[A] -> GSI 38 (level, low) -> IRQ 38
    <6>eth0: Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:66MHz:64-bit)
    10/100/1000BaseT Ethernet 00:04:76:f0:f9:aa
    <6>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
    TSOcap[0]
    <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    <6>ide: Assuming 33MHz system bus speed for PIO modes; override with
    idebus=xx
    <6>AMD8111: IDE controller at PCI slot 0000:00:07.1
    <6>AMD8111: chipset revision 3
    <6>AMD8111: not 100%% native mode: will probe irqs later


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 14:07    [W:0.040 / U:90.212 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site