[lkml]   [2004]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: pl2303/usb-serial driver problem in 2.4.27-pre6


I bet this has been caused by your USB changes?

Can you take a look at this please?

On Mon, Oct 11, 2004 at 02:22:32PM +0300, Oleksiy wrote:
> Hi all,
> I have a problem using GPRS inet vi my Siemens S55 attached with USB
> cable since kernel version 2.4.27-pre5, the link is established well,
> but then no packets get received, looking with tcpdump shows outgoing
> ping packets and just few per several minutes received back. I'm unable
> to ping, do nslookup, etc.
> The problem started when i switched from kernel 2.4.26 (linux slackware
> 10.0) to 2.4.28-pre3. None of ppp otions haven't changed and all the
> same options were set during kerenel config. So i decided to test all
> kernels between 2.4.26 and 2.4.28-pre4 (also not working). Link works
> well in 2.4.27-pre5 and stop working in 2.4.27-pre6. No "strange"
> messages or errors in the logs. firewall is disabled (ACCEPT for all).
> i'm using:
> pppd-2.4.2
> Siemens S55 mobile
> USB cable (PL2303 conroller)
> USB drivers:
> ehci_hcd
> uhci.c
> pl2303.c
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 14:06    [W:0.136 / U:5.520 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site