[lkml]   [2004]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRE: [2.6.x] e1000: NETDEV WATCHDOG: eth0: transmit timed out
    > since we have upgraded cabling on our network and transfer 
    > speeds increased a little bit, we are experiencing very often
    > situations where the Intel PRO/1000 nics just stop responding
    > and network dies for a while. Local console works, there are
    > no more error messages other than (when the eth0 comes to a
    > life again):
    > NETDEV WATCHDOG: eth0: transmit timed out
    > e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex

    Petr, I need you to try something. Get ethtool 1.8
    ( and turn off TSO:

    # ethtool -K eth0 tso off

    If you now longer see NETDEV WATCHDOG's, I have a next step. More on
    that later.

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 14:00    [W:0.034 / U:25.276 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site