lkml.org 
[lkml]   [2004]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[patch] 2.6.1-mm4 sgiioc4.c cleanup weak symbol and error numbers
From
Hi,

The included patch removes the usage of weak symbols from sgiioc4.c now
that we have the Kconfig issue sorted as well as cleans up the error no
handling (instead of return 1 on error) and adds a check for the return
value on snia_pci_endian_set as suggested by Christoph.

Cheers,
Jes

--- orig/linux-2.6.1-mm4/drivers/ide/pci/sgiioc4.c Sun Jan 11 07:00:35 2004
+++ linux-2.6.1-mm4/drivers/ide/pci/sgiioc4.c Fri Jan 16 02:54:10 2004
@@ -23,7 +23,6 @@
* http://oss.sgi.com/projects/GenInfo/NoticeExplan
*/

-#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
@@ -686,7 +685,7 @@
"0x%p to 0x%p ALREADY in use\n",
__FUNCTION__, hwif->name, (void *) base,
(void *) base + IOC4_CMD_CTL_BLK_SIZE);
- return 1;
+ return -ENOMEM;
}

if (hwif->io_ports[IDE_DATA_OFFSET] != base) {
@@ -726,20 +725,21 @@
PCIDMA_ENDIAN_BIG,
PCIDMA_ENDIAN_LITTLE
} pciio_endian_t;
-pciio_endian_t __attribute__ ((weak)) snia_pciio_endian_set(struct pci_dev
- *pci_dev, pciio_endian_t device_end,
- pciio_endian_t desired_end);
+pciio_endian_t snia_pciio_endian_set(struct pci_dev
+ *pci_dev, pciio_endian_t device_end,
+ pciio_endian_t desired_end);

static unsigned int __init
pci_init_sgiioc4(struct pci_dev *dev, ide_pci_device_t * d)
{
unsigned int class_rev;
+ pciio_endian_t endian_status;

if (pci_enable_device(dev)) {
printk(KERN_ERR
"Failed to enable device %s at slot %s\n",
d->name, dev->slot_name);
- return 1;
+ return -ENODEV;
}
pci_set_master(dev);

@@ -751,18 +751,17 @@
printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
"firmware is obsolete - please upgrade to revision"
"46 or higher\n", d->name, dev->slot_name);
- return 1;
+ return -ENODEV;
}

/* Enable Byte Swapping in the PIC... */
- if (snia_pciio_endian_set) {
- snia_pciio_endian_set(dev, PCIDMA_ENDIAN_LITTLE,
- PCIDMA_ENDIAN_BIG);
- } else {
+ endian_status = snia_pciio_endian_set(dev, PCIDMA_ENDIAN_LITTLE,
+ PCIDMA_ENDIAN_BIG);
+ if (endian_status != PCIDMA_ENDIAN_BIG) {
printk(KERN_ERR
"Failed to set endianness for device %s at slot %s\n",
d->name, dev->slot_name);
- return 1;
+ return -ENODEV;
}

return sgiioc4_ide_setup_pci_device(dev, d);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 14:00    [W:0.032 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site