lkml.org 
[lkml]   [2004]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectHighpoint 374 and drives recognized, but no drives/channels revealed
From
With 2.6.0, the hpt366 module seems to recognize the 8 drives attached
to my dual hpt374 controller, however no drives are visible. I should
have ide2 through ide5.

Have others run into a similar problem?

$ cat /proc/ide/hpt366
HighPoint HPT366/368/370/372/374

Controller: 0
Chipset: HPT374
--------------- Primary Channel --------------- Secondary Channel --------------
Enabled: yes yes
Cable: ATA-66 ATA-66

--------------- drive0 --------- drive1 ------- drive0 ---------- drive1 -------
DMA capable: yes yes yes yes
Mode: UDMA UDMA UDMA UDMA

Controller: 1
Chipset: HPT374
--------------- Primary Channel --------------- Secondary Channel --------------
Enabled: yes yes
Cable: ATA-66 ATA-33

--------------- drive0 --------- drive1 ------- drive0 ---------- drive1 -------
DMA capable: yes yes yes yes
Mode: UDMA UDMA UDMA UDMA


$ ls -lA /proc/ide
-r--r--r-- 1 root root 0 Jan 15 23:33 drivers
lrwxrwxrwx 1 root root 8 Jan 15 23:33 hda -> ide0/hda
lrwxrwxrwx 1 root root 8 Jan 15 23:33 hdb -> ide0/hdb
lrwxrwxrwx 1 root root 8 Jan 15 23:33 hdc -> ide1/hdc
lrwxrwxrwx 1 root root 8 Jan 15 23:33 hdd -> ide1/hdd
-r--r--r-- 1 root root 0 Jan 15 23:33 hpt366
dr-xr-xr-x 4 root root 0 Jan 15 23:33 ide0
dr-xr-xr-x 4 root root 0 Jan 15 23:33 ide1
-r--r--r-- 1 root root 0 Jan 15 23:33 via
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2005-03-22 14:00    [W:0.047 / U:52.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site