lkml.org 
[lkml]   [2004]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: ide driver from 2.4 to 2.6
Date
martin@linuxnerds.net writes:

> I have recently purchased the highpoint rocketraid 1540, which comes
> with a driver. It wount compile in 2.6.1,

Use the Linux native driver for hpt374. It works fine for me with
2.6.0. I'm running software RAID on four disks with no problems so
far (uptime nearly 6 days, that's when I installed 2.6.0).

> which is understandable. I tried the promise open source driver,
> which results in a similar error, somewhere in the irq- system
> (irq.h).
>
> Now the question is, would it be a accomplishable task for me to fix
> this, and what are the differences from the old to the new one, and
> what must i watch out for?

The Highpoint driver is one of the ugliest pieces of code I've seen.
I'm surprised it works at all. Don't go near it if you wish to keep
your sanity.

There have been scattered reports of trouble with the hpt374 chip
lately, so maybe I have been lucky. I'd still suggest that you give
it a try.

--
Måns Rullgård
mru@kth.se

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:00    [W:0.033 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site