lkml.org 
[lkml]   [2004]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2.4] i2c cleanups, third wave (3/8)
Remove bus scanning from various algorithms (i2c-algo-bit, i2c-algo-ite,
i2c-algo-pcf and i2c-algo-sibyte). This was discussed on the LM Sensors
mailing list:
http://archives.andrew.net.au/lm-sensors/msg05639.html
Main reason is that there is the i2cdetect user-space tools for that,
which works with all i2c busses (except i2c-isa) and does a better job.

A similar patch was sent to Greg KH for linux 2.6 and was applied in
2.6.1-rc1.

Note that this patch was voluntarily generated using diff -U2, because
it contains only removals, so much context isn't required.


diff -U2 -rN linux-2.4.24-pre3-k1/drivers/i2c/i2c-algo-bit.c linux-2.4.24-pre3-k2/drivers/i2c/i2c-algo-bit.c
--- linux-2.4.24-pre3-k1/drivers/i2c/i2c-algo-bit.c 2004-01-05 09:44:26.000000000 +0100
+++ linux-2.4.24-pre3-k2/drivers/i2c/i2c-algo-bit.c 2004-01-05 15:22:54.000000000 +0100
@@ -51,5 +51,4 @@
static int i2c_debug;
static int bit_test; /* see if the line-setting functions work */
-static int bit_scan; /* have a look at what's hanging 'round */

/* --- setting states on the bus with the right timing: --------------- */
@@ -527,5 +526,4 @@
int i2c_bit_add_bus(struct i2c_adapter *adap)
{
- int i;
struct i2c_algo_bit_data *bit_adap = adap->algo_data;

@@ -547,21 +545,4 @@
adap->retries = 3; /* be replaced by defines */

- /* scan bus */
- if (bit_scan) {
- int ack;
- printk(KERN_INFO " i2c-algo-bit.o: scanning bus %s.\n",
- adap->name);
- for (i = 0x00; i < 0xff; i+=2) {
- i2c_start(bit_adap);
- ack = i2c_outb(adap,i);
- i2c_stop(bit_adap);
- if (ack>0) {
- printk("(%02x)",i>>1);
- } else
- printk(".");
- }
- printk("\n");
- }
-
#ifdef MODULE
MOD_INC_USE_COUNT;
@@ -605,9 +586,7 @@

MODULE_PARM(bit_test, "i");
-MODULE_PARM(bit_scan, "i");
MODULE_PARM(i2c_debug,"i");

MODULE_PARM_DESC(bit_test, "Test the lines of the bus to see if it is stuck");
-MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
MODULE_PARM_DESC(i2c_debug,
"debug level - 0 off; 1 normal; 2,3 more verbose; 9 bit-protocol");
diff -U2 -rN linux-2.4.24-pre3-k1/drivers/i2c/i2c-algo-ite.c linux-2.4.24-pre3-k2/drivers/i2c/i2c-algo-ite.c
--- linux-2.4.24-pre3-k1/drivers/i2c/i2c-algo-ite.c 2004-01-05 09:43:53.000000000 +0100
+++ linux-2.4.24-pre3-k2/drivers/i2c/i2c-algo-ite.c 2004-01-06 11:56:13.000000000 +0100
@@ -68,5 +68,4 @@
static int i2c_debug=1;
static int iic_test=0; /* see if the line-setting functions work */
-static int iic_scan=0; /* have a look at what's hanging 'round */

/* --- setting states on the bus with the right timing: --------------- */
@@ -745,6 +744,4 @@
int i2c_iic_add_bus(struct i2c_adapter *adap)
{
- int i;
- short status;
struct i2c_algo_iic_data *iic_adap = adap->algo_data;

@@ -774,22 +771,4 @@
iic_init(iic_adap);

- /* scan bus */
- /* By default scanning the bus is turned off. */
- if (iic_scan) {
- printk(KERN_INFO " i2c-algo-ite: scanning bus %s.\n",
- adap->name);
- for (i = 0x00; i < 0xff; i+=2) {
- iic_outw(iic_adap, ITE_I2CSAR, i);
- iic_start(iic_adap);
- if ( (wait_for_pin(iic_adap, &status) == 0) &&
- ((status & ITE_I2CHSR_DNE) == 0) ) {
- printk(KERN_INFO "\n(%02x)\n",i>>1);
- } else {
- printk(KERN_INFO ".");
- iic_reset(iic_adap);
- }
- udelay(iic_adap->udelay);
- }
- }
return 0;
}
@@ -834,9 +813,7 @@

MODULE_PARM(iic_test, "i");
-MODULE_PARM(iic_scan, "i");
MODULE_PARM(i2c_debug,"i");

MODULE_PARM_DESC(iic_test, "Test if the I2C bus is available");
-MODULE_PARM_DESC(iic_scan, "Scan for active chips on the bus");
MODULE_PARM_DESC(i2c_debug,
"debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol");
diff -U2 -rN linux-2.4.24-pre3-k1/drivers/i2c/i2c-algo-pcf.c linux-2.4.24-pre3-k2/drivers/i2c/i2c-algo-pcf.c
--- linux-2.4.24-pre3-k1/drivers/i2c/i2c-algo-pcf.c 2003-12-31 14:50:59.000000000 +0100
+++ linux-2.4.24-pre3-k2/drivers/i2c/i2c-algo-pcf.c 2004-01-06 12:01:10.000000000 +0100
@@ -53,5 +53,4 @@
*/
static int i2c_debug=0;
-static int pcf_scan=0; /* have a look at what's hanging 'round */

/* --- setting states on the bus with the right timing: --------------- */
@@ -458,5 +457,5 @@
int i2c_pcf_add_bus(struct i2c_adapter *adap)
{
- int i, status;
+ int i;
struct i2c_algo_pcf_data *pcf_adap = adap->algo_data;

@@ -481,28 +480,4 @@

i2c_add_adapter(adap);
-
- /* scan bus */
- if (pcf_scan) {
- printk(KERN_INFO " i2c-algo-pcf.o: scanning bus %s.\n",
- adap->name);
- for (i = 0x00; i < 0xff; i+=2) {
- if (wait_for_bb(pcf_adap)) {
- printk(KERN_INFO " i2c-algo-pcf.o: scanning bus %s - TIMEOUTed.\n",
- adap->name);
- break;
- }
- i2c_outb(pcf_adap, i);
- i2c_start(pcf_adap);
- if ((wait_for_pin(pcf_adap, &status) >= 0) &&
- ((status & I2C_PCF_LRB) == 0)) {
- printk("(%02x)",i>>1);
- } else {
- printk(".");
- }
- i2c_stop(pcf_adap);
- udelay(pcf_adap->udelay);
- }
- printk("\n");
- }
return 0;
}
@@ -537,12 +512,8 @@
MODULE_LICENSE("GPL");

-MODULE_PARM(pcf_scan, "i");
MODULE_PARM(i2c_debug,"i");
-
-MODULE_PARM_DESC(pcf_scan, "Scan for active chips on the bus");
MODULE_PARM_DESC(i2c_debug,
"debug level - 0 off; 1 normal; 2,3 more verbose; 9 pcf-protocol");

-
int init_module(void)
{
diff -U2 -rN linux-2.4.24-pre3-k1/drivers/i2c/i2c-algo-sibyte.c linux-2.4.24-pre3-k2/drivers/i2c/i2c-algo-sibyte.c
--- linux-2.4.24-pre3-k1/drivers/i2c/i2c-algo-sibyte.c 2003-08-25 13:44:41.000000000 +0200
+++ linux-2.4.24-pre3-k2/drivers/i2c/i2c-algo-sibyte.c 2004-01-06 12:09:46.000000000 +0100
@@ -40,10 +40,5 @@
#define SMB_CSR(a,r) ((long)(a->reg_base + r))

-/* ----- global variables --------------------------------------------- */
-
-/* module parameters:
- */
-static int bit_scan=0; /* have a look at what's hanging 'round */
-
+/* ----- functions ---------------------------------------------------- */

static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
@@ -152,5 +147,4 @@
int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
{
- int i;
struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;

@@ -164,22 +158,4 @@
csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));

- /* scan bus */
- if (bit_scan) {
- union i2c_smbus_data data;
- int rc;
- printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n",
- i2c_adap->name);
- for (i = 0x00; i < 0x7f; i++) {
- /* XXXKW is this a realistic probe? */
- rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE_DATA, &data);
- if (!rc) {
- printk("(%02x)",i);
- } else
- printk(".");
- }
- printk("\n");
- }
-
#ifdef MODULE
MOD_INC_USE_COUNT;
@@ -217,6 +193,4 @@
MODULE_AUTHOR("Kip Walker, Broadcom Corp.");
MODULE_DESCRIPTION("SiByte I2C-Bus algorithm");
-MODULE_PARM(bit_scan, "i");
-MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
MODULE_LICENSE("GPL");

--
Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:00    [W:0.067 / U:1.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site