[lkml]   [2003]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectSensors and linux 2.6.0-test4-bk8 question

Please bear with me and enlighten me a bit. I've been fiddling with
2.5/2.6 for some time, and got most of my hardware working (including
acpi...) better than in 2.4. (in fact now I'm using only 2.6). So now I
got to the point where I'm looking at nice-to-have stuff like sensors.

I know libsensors is not yet 2.6 aware, but I thought sensed values
where available in sysfs if one wanted to manually read them. Since I
have via hardware:

00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:0a.0 RAID bus controller: CMD Technology Inc PCI0680 (rev 02)
00:0c.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus
Master IDE (rev 06)
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP
(rev 04)

I build-in via-pro and VIA686A:

Now there is no sensor-related message as far as I can see in my dmesg,
and I do not seem to find any temperature/fan related info in /sys:

root@rousalka root]# find /sys/| grep i2c

So I'd like to know how I'm supposed to check if the kernel sensors part
works (and eventualy get some useful info out of it)


Nicolas Mailhot
[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2005-03-22 13:48    [W:0.060 / U:6.320 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site