lkml.org 
[lkml]   [2003]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Problems with PCMCIA (Texas Instruments PCI1450)
From
Date
On Wed, 2003-08-27 at 22:59, Russell King wrote:
> I've just created http://pcmcia.arm.linux.org.uk/ to document the
> currently known problems and to contain patches for them.
>
ok, I've built and booted linux 2.5.70 to 2.5.75, and it seems that the
detecting the aironet card as a memory_cs device happens in 2.5.74

_but_ I did come across a number of other weirdnesses on the way.
1. 2.5.71 was missing a #include <linux/cpu.h> in flow.c
2. when i patched 2.5.70 to 2.5.71 and then 2.5.72 somehow SMP became
enabled, and this stopped pcmcia from working at all
3. my /etc/defaults/pcmcia contained the line PCIC-i82365, which seemed
not tp cause 2.5.70 any problems, but after that i had to change that to
yenta before pcmicia started successfully

I assume the next step is to apply the 2.5.74 patch in pieces ?

cheers
Sven

-----------------
from dmesg 2.5.73

Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 9 for device 00:02.0
PCI: Sharing IRQ 9 with 00:05.0
PCI: Sharing IRQ 9 with 01:00.0
Yenta IRQ list 00b8, PCI irq9
Socket status: 30000006
PCI: Found IRQ 9 for device 00:02.1
Yenta IRQ list 00b8, PCI irq9
Socket status: 30000010
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
airo: Doing fast bap_reads
airo: MAC enabled eth1 0:40:96:33:e:a4
eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f
bad: scheduling while atomic!
Call Trace:
[<c0117666>] schedule+0x3b6/0x3c0
[<e0852bea>] sendcommand+0xaa/0xe0 [airo]
[<e0852b0c>] issuecommand+0x5c/0x90 [airo]
[<e08530ca>] PC4500_accessrid+0x4a/0x90 [airo]
[<e0853177>] PC4500_readrid+0x67/0x120 [airo]
[<c0175118>] padzero+0x28/0x30

-----------------
dmesg from 2.5.74

Yenta IRQ list 0000, PCI irq9
Socket status: 30000006
PCI: Found IRQ 9 for device 0000:00:02.1
ti113x: Routing card interrupts to PCI
Yenta IRQ list 0000, PCI irq9
Socket status: 30000010
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.


----------------
the differences between the 2 .config files

root@sven:/usr/src/2.5# diff linux-2.5.73/.config linux-2.5.74/.config
174d173
< CONFIG_BINFMT_AOUT=m
175a175
> CONFIG_BINFMT_AOUT=m
178a179,183
> # Generic Driver Options
> #
> # CONFIG_FW_LOADER is not set
>
> #
350d354
< # CONFIG_SCSI_NCR53C7xx is not set
352d355
< # CONFIG_SCSI_NCR53C8XX is not set
711d713
< # CONFIG_MOUSE_PS2_SYNAPTICS is not set
747a750
> # CONFIG_I2C_PROSAVAGE is not set
758a762
> # CONFIG_I2C_ALI1535 is not set
774a779
> # CONFIG_SENSORS_LM78 is not set
1266a1272
> # CONFIG_USB_AX8817X is not set




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:48    [W:0.105 / U:1.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site