Messages in this thread | | | Date | Mon, 15 Sep 2003 16:37:41 -0400 | From | todd1@gate ... | Subject | 2.6.0-test5 panic w cpqarray root=/dev/ida/c0d0p1 |
| |
I am having a problem booting the 2.6.0-test5 kernel. It seems to be confused about my root disk on a cpqarray controler. The configuration works fine with v2.4.22. Here is are sections of the boot messages, first from the 2.6 failure, and then a normal startup from the 2.4.22 kernel.
------------------------- v2.6.0-test5 ----------------------------- isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Using anticipatory scheduling io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Compaq SMART2 Driver (v 2.4.5) Found 1 controler(s) cpqarray: Finding drives on ida0 (Integrated Array) cpqarray ida/c0d0: blksz=512 nr_blks=106659360 ida/c0d0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > Compaq CISS Driver (v 2.5.0) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1 SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2c00-0x2c07, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x2c08-0x2c0f, BIOS settings: hdc:pio, hdd:pio hda: Compaq CRN-8241B, ATAPI CD/DVD-ROM drive hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hda: set_drive_speed_status: error=0x04 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ... input: PS/2 Generic Mouse on isa0060/seriol serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 EISA: Probing bus 0 at eisa0 EISA: Mainboard CPQ0692 detected. Connot allocate resource for EISA slot 1 Connot allocate resource for EISA slot 2 Connot allocate resource for EISA slot 3 Connot allocate resource for EISA slot 4 EISA: Detected 0 cards. NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. VFS: Cannot open root device "ida/c0d0p1" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0)
------------------------- v2.4.22 ----------------------------- Linux version 2.4.20-8 (bhcompile@porky.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fffc000 (usable) BIOS-e820: 000000000fffc000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. On node 0 totalpages: 65532 zone(0): 4096 pages. zone(1): 61436 pages. zone(2): 0 pages. Kernel command line: ro root=/dev/ida/c0d0p1 Initializing CPU#0 Detected 731.069 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1458.17 BogoMIPS Memory: 252884k/262128k available (1347k kernel code, 6812k reserved, 999k data, 132k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf0084, last bus=3 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Discovered peer bus 03 PCI: Device 00:00 not found by BIOS PCI: Device 00:01 not found by BIOS PCI: Device 00:78 not found by BIOS isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Starting kswapd VFS: Disk quotas vdquot_6.5.1 pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks OSB4: IDE controller at PCI slot 00:0f.1 SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2c00-0x2c07, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x2c08-0x2c0f, BIOS settings: hdc:pio, hdd:pio hda: Compaq CRN-8241B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-floppy driver 0.99.newide ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 249k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 scsi_register allocating 3788 bytes for FC HBA ioremap'd Membase: d083de00 HBA Tachyon RevId 1.2 Allocating 119808 for 576 Exchanges @ c18a0000 Allocating 112904 for LinkQ @ c1880000 (576 elements) Allocating 104456 for TachSEST for 512 Exchanges cpqfcTS: writing IMQ BASE 18C0000h PI 18C4000h cpqfcTS: SEST c1840000(virt): Wrote base 1840000h @ d083df40 scsi0 : Compaq FibreChannel HBA Tachyon TS HPFC-5166A/1.2: WWN 500508B200154740 on PCI bus 3 device 0xa0fc irq 11 IObaseL 0x4400, MEMBASE 0xc6dffe00 PCI bus width 64 bits, bus speed 33 MHz FCP-SCSI Driver v2.1.2 GBIC detected: Short-wave. LPSM 0h Monitor Compaq SMART2 Driver (v 2.4.25) cpqarray: Device 0x10 has been found at bus 0 dev 1 func 0 cpqarray: Finding drives on ida0 (Integrated Array) cpqarray ida/c0d0: blksz=512 nr_blks=106659360 cpqarray: Starting firmware's background processing blk: queue c03be840, I/O limit 4095Mb (mask 0xffffffff) Partition check: ida/c0d0: p1 p2 p3 p4 < p5 p6cpqfcTS: New FC port 000001h WWN: 100000E00201A196 SCSI Chan/Trgt 0/0 p7 p8 p9 > Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |